Optimum Dose Of Lime And Fly Ash For Treatment Of Hexavalent Chromium–Contaminated Soil

The presence of hexavalent chromium, Cr(VI), in soil is an environmental concern due to its effect on human health. The concern arises from the leaching and the seepage of Cr(VI) from soil to groundwater. In this paper, a stabilization technology to prevent this problem was simulated on an artificial soil contaminated with hexavalent chromium. The process is a physico-chemical treatment in which the toxic pollutant is physically entrapped within a solid matrix formed by the pozzolanic reactions of lime and fly ash to reduce its leachability and, therefore, its toxicity. This paper presents the optimum ratio of fly ash and lime in order to stabilize artificial soils contaminated with 0.4 wt.% of Cr (VI) in a brief term process. The degree of chromium released from the soil was evaluated using a modified Toxicity Characteristic Leaching Procedure (TCLP) by US Environmental Protection Agency (EPA). Overall, experimental results showed reduced leachability of total and hexavalent chromium from soils treated with both fly ash and quicklime, and that leachability reduction was more effective with increasing amount of fly ash and quicklime. Stabilization percentages between 97.3% and 99.7% of the initial chromium content were achieved, with Cr(VI) concentration in the TCLP leachates below the US EPA limit for chromium of 5 mg/l. Adequate treatment was obtained after 1 day of curing with just 25% fly ash and 10% quicklime.     

Air quality biomonitoring through pollen viability of Fabaceae

In this study, pollen viability and germination of three plant species, Cercis siliquastrum L., Robinia pseudoacacia L., and Spartium junceum L., belonging to the Fabaceae family, was evaluated in sites with different intensity of road traffic, constantly monitored with continuous analysers for air pollutants (carbon monoxide (CO), sulphur dioxide (SO₂), and nitrogen dioxide (NO₂)) by the Municipality of Catania. Two sites, in which road traffic was absent, were selected, too. The percentages of viable pollen by 2,3,5-trypheniltetrazolium chloride (TTC) test ranged from 59.0 to 90.2 % in C. siliquastrum, from 61.5 to 83.5 % in S. junceum and from 67.5 to 84.3 % in R. pseudoacacia. The percentages of germination varied from 41.0 to 72.7 % in C. siliquastrum, from 42.0 to 64.7 % in S. junceum and from 38.3 to 66.3 % in R. pseudoacacia. The highest percentages of viable pollens were found in no-road traffic stations by either TTC or germination tests, while the lowest values were detected in a site characterised by heavy road traffic. In the monitored period (2007–2009), pollen viability, germinability and tube length of C. siliquastrum resulted in a significant negative correlation to CO, SO₂ and NO₂, whereas data from TTC and germination tests on S. junceum and R. pseudoacacia pollens were not well correlated to air pollutants. The results showed that pollen viability, germination and tube growth in C. siliquastrum were affected by air pollution. S. junceum and R. pseudoacacia were not very influenced by air pollutants, suggesting a different pollen sensitivity of these species.     

海上注聚井渗氮油管腐蚀失效原因

渤海S油田A2井渗氮防腐油管在注聚过程中发现多处腐蚀穿孔,为避免换管柱后再次发生腐蚀失效,通过腐蚀形貌观察、腐蚀产物分析、腐蚀介质分析对A2井油管腐蚀失效原因进行了研究。认为A2井油管部分渗氮层脱落,形成了电化学腐蚀的阳极,这是造成局部腐蚀的根本原因。注入水中存在较高含量的氯离子和硫酸盐还原菌,加剧了腐蚀进程,造成油管腐蚀穿孔,形成了以FeCO_3为主的腐蚀产物。建议加强渗氮油管质量管控,防止入井前渗氮层脱落,同时在注入水中加入杀菌剂减少细菌对腐蚀的影响,并在井下安装牺牲阳极短节预防腐蚀。     

Sinterability study of ceramic bodies made from a mixture of mineral coal bottom ash and soda-lime glass cullet.

The aim of this study was to investigate the sinterability to improve the technical properties of ceramic bodies made from coal bottom ash and soda-lime glass cullet. Different mixtures of bottom ash and glass cullet were formulated. The amount of bottom ash was 100, 70, 50 and 30 wt.%. The particle size distribution was the same for all formulations. The mixture containing 50 wt.% bottom ash also had its particle size distribution changed. Samples were formed by dry pressing and then fired at 950, 1050 and 1150 degrees C. Samples were evaluated for linear shrinkage, water absorption, flexural mechanical resistance, scanning electronic microscopy, pyroplastic deformation and thermodilatometric analysis. The higher firing temperature led to a decrease in water absorption and increased linear shrinkage, mechanical resistance and pyroplastic deformation. This effect was also observed for addition of glass up to 50 wt.%. The effect of smaller particles of bottom ash was more significant for linear shrinkage and mechanical resistance of ceramic bodies fired at 1150 degrees C. The use of a finer powder contributed to increase these properties. The influence of finer particles on water absorption and mechanical resistance of ceramic bodies fired at 950 and 1050 degrees C was not significant.     

Modeling mercury emissions from forest fires in the Mediterranean region

Mercury emissions from forest fires in countries bordering the Mediterranean Sea have been estimated on the basis of satellite observations for the year 2006. The assessment has been done by means of the Moderate Resolution Imaging Spectroradiometer (MODIS) products (MOD12Q1, MOD14A2, MOD15A2, MOD44B). Estimates show that wild fires have burnt 310,268 ha in the Region, affecting by 45% the Mixed Forest and by 37% the Evergreen Needleleaf Forest and the Evergreen Broadleaf Forest. The amount of biomass burned was about 66,000 Mg for the Evergreen Needleleaf Forest, 72,000 Mg for the Evergreen Broadleaf Forest and 196,000 Mg for the Mixed Forest. The total amount of mercury released to the atmosphere in the Mediterranean countries accounted for 4.3 Mg year⁻¹ with Italy, France, Austria, Bulgaria, Algeria, Spain and Croatia being the most contributing countries with annual emission ranging from 330 to 970 kg year⁻¹. The maximum release of Gaseous Elemental Mercury (GEM) and particulate mercury (Hg(p)) in the region occurred in July with 1,218 kg. The uncertainty of our estimates is comparable with that associated to current assessments of mercury emissions from major industrial sources.     

Bisphenol A endocrine disruptor complete degradation using TiO2 photocatalysis with ozone

Bisphenol A is an endocrine disruptor. Complete mineralization of bisphenol A is therefore a primary environmental issue. Here, the combination of ozonation and photocatalysis by TiO₂ is proposed for the degradation and final mineralization of bisphenol A. TiO₂ films deposited onto two sides of an Al lamina show good stability and high surface roughness. We used a specific experimental setup employing two facing ultraviolet lamps and TiO₂ layers, together with an ozone flux. High-performance liquid chromatography–mass spectrometry determinations on bisphenol A solutions sampled at different reaction times and Fourier Transform Infrared analyses of the oxide at the end of the reaction were performed to study the reaction intermediates and the overall degradation mechanism. Our results show that pollutant mineralization achieved with the combined method is far higher, of 55% in the case of 0.3 mM bisphenol A, than those obtained by individual treatments such as photolysis (<3%), ozonation (6%), photocatalysis (6%), and by other combined processes: photolytic ozonation (13%) and catalytic ozonation (15%). This finding is explained by the occurrence of highly synergistic effects.     

Cooperatively breeding carrion crows adjust offspring sex ratio according to group composition

In cooperatively breeding species, parents should bias offspring sex ratio towards the philopatric sex to obtain new helpers (helper repayment hypothesis). However, philopatric offspring might increase within-group competition for resources (local resource competition hypothesis), diluting the benefits of helper acquisition. Furthermore, benefits of offspring sex bias on parents’ fitness may depend on different costs of production and/or different breeding opportunities of sons and daughters. Because of these counteracting factors, strategies of offspring sex allocation in cooperative species are often difficult to investigate. In carrion crows Corvus corone corone in northern Spain, sons are more philopatric and more helpful at the nest than daughters, which disperse earlier and have higher chances to find a breeding vacancy. Consistent with the helper repayment hypothesis, we found that crows fledged more sons in groups short of subordinate males than in groups with sufficient helper contingent, where daughters were preferred. Crow females also proved able to bias primary sex ratio, allocating offspring sex along the hatching sequence in a way that provided the highest fledging probability to sons in the first breeding attempt and to daughters in the following ones. The higher cost of producing male offspring may explain this pattern, with breeding females shifting to the cheapest sex (female) as a response to the costs generated by previous reproductive attempts. Our results suggest complex adjustments of offspring sex ratio that allowed crows to maximize the value of daughters and sons.     

Trophic role of small cyclopoid copepod nauplii in the microbial food web: a case study in the coastal upwelling system off central Chile

Copepod grazing impact on planktonic communities has commonly been underestimated due to the lack of information on naupliar feeding behaviour and ingestion rates. That is particularly true for small cyclopoid copepods, whose nauplii are mainly in the microzooplankton size range (<200 μm). The trophic role of Oithona spp. nauplii was investigated off Concepción (central Chile, ~36°S) during the highly productive upwelling season, when maximum abundances of these nauplii were expected. Diet composition, ingestion rates, and food-type preferences were assessed through grazing experiments with different size fractions of natural planktonic assemblages (<3, <20, <100, and <125 μm) and cultures of the nanoflagellate Isochrysis galbana. When the Oithona spp. nauplii were offered a wide range of size fractions as food (pico- to microplankton), they mostly ingested small (2–5 μm) nanoflagellates (5–63 × 10³ cells nauplius⁻¹ day⁻¹). No ingestion on microplankton was detected, and picoplankton was mainly ingested when it was the only food available. Daily carbon (C) uptake by the nauplii ranged between 28 and 775 ng C nauplius⁻¹, representing an overall mean of 378% of their body C. Our relatively high ingestion rate estimates can be explained by methodological constraints in previous studies on naupliar feeding, including those dealing with “over-crowding” and “edge” effects. Overall, the grazing impact of the Oithona spp. nauplii on the prey C standing stocks amounts up to 21% (average = 13%) for picoplankton and 54% (average = 28%) for nanoplankton. These estimates imply that the nauplii of the most dominant cyclopoid copepods exert a significant control on the abundances of nanoplankton assemblages and, thereby, represent an important trophic link between the classical and microbial food webs in this coastal upwelling system.     

Ni-MH spent batteries: a raw material to produce Ni-Co alloys

Ni-MH spent batteries are heterogeneous and complex materials, so any kind of metallurgical recovery process needs a mechanical pre-treatment at least to separate irony materials and recyclable plastic materials (like ABS) respectively, in order to get additional profit from this saleable scrap, as well as minimize waste arising from the braking separation process. Pyrometallurgical processing is not suitable to treat Ni-MH batteries mainly because of Rare Earths losses in the slag. On the other hand, the hydrometallurgical method, that offers better opportunities in terms of recovery yield and higher purity of Ni, Co, and RE, requires several process steps as shown in technical literature. The main problems during leach liquor purification are the removal of elements such as Mn, Zn, Cd, dissolved during the leaching step, and the separation of Ni from Co. In the present work, the latter problem is overcome by co-deposition of a Ni-35/40%w Co alloy of good quality. The experiments carried out in a laboratory scale pilot-plant show that a current efficiency higher than 91% can be reached in long duration electrowinning tests performed at 50 degrees C and 4.3 catholyte pH.