The influence of temperature on the deactivation of commercial Pd/Rh automotive catalysts

Automotive catalyst deactivation can be promoted by thermal and poisoning mechanisms. Catalyst efficiency is reduced by thermal degradation resulting in the agglomeration of precious metals and the reduction of the washcoat surface area. In this paper, the temperature influence on the commercial Pd/Rh-based automotive catalyst performance was studied. Textural and physicochemical characterisation techniques were employed, such as X-ray fluorescence (XRF), atomic absorption spectrometry (AAS), N₂ physisorption, X-ray diffraction (XRD), temperature programmed reduction (TPR) and scanning electron microscopy coupled with energy-dispersive X-ray analysis (SEM–EDX). The catalysts were evaluated for CO and propane oxidation with a stoichiometric gas mixture similar to engine exhaust gas. The results indicated the transformation of alumina into high temperature phases and the formation of new mixed oxide phases. Evidence of sintered particles and several spots of palladium agglomerates was seen by SEM–EDX analysis. The activity results showed the effects of thermal deactivation on the conversion of the pollutants. In spite of exposure to extreme temperature conditions (72 h at 1200 °C), significant activity was still observed for carbon monoxide and propane oxidation reactions.     

Medical radioisotopes in the environment – following the pathway from patient to river sediment

Motivated by the detection of ¹³¹I in river sediment in routine long-term surveillance samples, a systematic short-term study of the wastewater treatment chain was planned and conducted. Inflow, effluent and primary sludge were collected on a daily basis during two weeks at a regional wastewater treatment plant. Samples were investigated by gamma spectroscopy. Four medically used isotopes could be identified (¹³¹I and ^99mTc regularly, ¹⁵³Sm and ¹²³I sporadically). The concentration levels coincide well with literature data for ¹³¹I, and with our own long-term data for ¹³¹I and ^99mTc for the same plant. Cosmogenic ⁷Be activity in primary sludge correlated well with rainfall intensity. Surface sediment was sampled at low tide at both shores of the river, up- and downstream of the plant. ¹³¹I was identified in all samples, with a sharp maximum (about 100 Bq kg⁻¹ d.m.) at the discharge point of the plant and lower levels elsewhere, decreasing monotonically in downstream direction. ⁷Be and ¹³⁷Cs showed the same behaviour, but no peak at the discharge point. Predictions from simple equilibrium models for the transport and sedimentation of ¹³¹I show good agreement with the experimental data and suggest that the wastewater treatment plant is the main source for this isotope.     

Aryl hydrocarbon receptor-mediated activity of atmospheric particulate matter from an urban and a rural site in Switzerland

Atmospheric particulate matter (PM) is an air-suspended mixture of solid and liquid particles that vary in size, shape, and chemical composition. Long-term exposure to elevated concentrations of fine atmospheric particles is considered to pose a health threat to humans and animals. In this context, it has been hypothesized that toxic chemicals such as polycyclic aromatic hydrocarbons (PAHs) play an important role. Some PAHs are known to be carcinogenic and it has been shown that carcinogenic effects of PAHs are mediated by the aryl hydrocarbon receptor (AhR). In this study, PM1 was collected at a rural and an urban traffic site during an intense winter smog period, in which concentration of PM1 often exceeded 50 μg m^?3. We applied an in vitro reporter gene assay (DR-CALUX) to detect and quantify PM1-associated chemicals that induce AhR-mediated gene expression. This activity was expressed as CALUX equivalents of 2,3,7,8-tetrachlorodibenzodioxin (PM-TCDD-CEQs). In addition, concentrations of PAHs in the PM1 extracts were determined using gas chromatography/high-resolution mass spectrometry. Concentrations of PM-TCDD-CEQs ranged from 10 to 85 pg m^?3 and from 19 to 87 pg m^?3 at the urban and rural site, respectively. By the use of known relative potency factors, the measured concentration of a PAH was converted into a PAH-TCDD-CEQ concentration. ΣPAH-TCDD-CEQ and PM-TCDD-CEQ were highly correlated at both sites (r² = 0.90 and 0.69). The calculated ΣPAH-TCDD-CEQs explain between 2% and 20% of the measured PM-TCDD-CEQs. Benzo[k]fluoranthene was the most important PAH causing approximately 60% of the total ΣPAH-TCDD-CEQ activity. In contrast to NO, CO, PM10, and PM1, the concentration of PM-TCDD-CEQs showed no significant difference between the two sites. No indications were found that road traffic emissions caused elevated concentrations of PM-TCDD-CEQs at the urban traffic site.     

From waste to value-added products: A review of opportunities for fish waste valorization

The fishing industry is responsible for generating large amounts of organic waste rich in compounds of commercial interest. This review aimed to present the state of the art about the possibilities of using solid waste to obtain value-added products. Skins, fins, and scales have been used to obtain gelatin and collagen, a promising compound for use as an additive in yogurts and creams, as well as for the synthesis of biodegradable packaging that, if applicable, can reduce the environmental impact caused by petroleum packaging. Other parts, such as the head and the viscera, contain polyunsaturated fatty acids and other fat-soluble vitamins that have been studied for the production of omega-3 capsules for the pharmaceutical industry, but when the extracted oil does not fit the feeding parameters, it can be applied for the production of biodiesel. Furthermore, fishes are a promising source of astaxanthin, a carotenoid with high antioxidant properties. The use of combined techniques such as chemical and enzymatic methods can increase the extraction yield and favor the obtaining of more purified compounds, in addition to promoting the reduction of chemicals that are aggressive to the environment. In general, conscious production in the fishing industry through the valorization of waste generated for use as inputs for other value chains encompasses aspects of the circular economy, which can positively impact several Sustainable Development Goals.     

Human influence over 150 years of coastal evolution in the Volturno delta system (southern Italy)

This paper focused on the past shoreline change rates along the coastal plain of the Volturno River, in southern Italy, western Mediterranean. A wide database comprising historical maps, aerial photographs, topographic sheets, bathymetric data was used to extract the spatial and temporal information of the coastlines at seven time points. Coastline displacement was calculated for two successive time points and relative surface variation (accretion and erosion) was estimated as well as minimum and maximum accretion/erosion linear values and rates. The surface variation analysis has revealed that the studied coast can be considered homogeneous since the 1970s, whereas it exhibits a variety of shoreline evolutionary trends after that time period. Timing and causes of trends and rates of variation were detected. Based on the estimated shoreline change rates, an appropriate morhodynamic one-line model was applied to predict evolutionary scenarios also in presence of port and defence works. The results obtained strongly emphasize that a successful coastal management requires a constant monitoring of the human-induced changes to account for the variability of rates over time.     

Bioassays for the evaluation of reclaimed opencast coal mining areas

Environmental Science and Pollution Research - This study aimed to use bioassays (single and multispecies) with organisms from different trophic levels to assess soil quality in reclaimed coal...     

Image analysis application for the study of activated sludge floc size during the treatment of synthetic and real fishery wastewaters

Background, aim, and scope  

Fishery wastewater treatment can be compromised due to seasonal production. The use of sequencing batch reactors is not completely successful, despite flexibility being one of the principal advantages. Most research on activated sludge is performed using synthetic wastewater to ensure a stable and constant feed. The current work compared biomass morphology and settling ability using image analysis of synthetic and real fishery wastewaters, with and without NaCl addition.     

Behaviour of arsenic in forested catchments following a high-pollution period

Due to high availability of adsorption sites, forested catchments could be net sinks for pollutant arsenic both during the period of increasing and decreasing pollution. We tested this hypothesis along a north-south pollution gradient in spruce die-back affected areas of Central Europe. For two water years (2007-2008), we monitored As fluxes via spruce-canopy throughfall, open-area precipitation, and runoff in four headwater catchments (Czech Republic). Since 1980, atmospheric As inputs decreased 26 times in the north, and 13 times in the south. Arsenic export by runoff was similar to atmospheric inputs at three sites, resulting in a near-zero As mass balance. One site exhibited a net export of As (2.2 g ha⁻¹ yr⁻¹). In contrast, the preceding period (1995-2006) showed much higher As fluxes, and higher As export. Czech catchments do not serve as net sinks of atmospheric As. A considerable proportion of old industrial arsenic is flushed out of the soil.     

DGT use in contaminated site characterization. The importance of heavy metal site specific behaviour

The objective of this study is to provide an insight into the techniques for measuring the lability of heavy metals in solid-phase pool of soils in order to assess the environmental risk arising from pollution. The technique of diffusive gradients in thin films (DGT) and a sequential extraction procedure were used to quantify the labile pools of Cu, Fe, Mn and Ni. These results were compared to metal concentrations in groundwater, measured directly using the in situ piezometers, and to the total concentration of metal in the soils. High concentrations of metal in the directly analysed soil solution compared to DGT measurement were attributed to the presence of colloidal metal. The use of DGT allowed only to calculate leaching parameters of the free ions and labile fractions of the metals. For this reason DGT technique needs preliminary investigation on metal speciation in soil solution before its application as a good tool in the characterization procedure of contaminated sites.