An empirical perspective for understanding climate change impacts in Switzerland

Regional Environmental Change - Planning for the future requires a detailed understanding of how climate change affects a wide range of systems at spatial scales that are relevant to humans....     

Sampling and analytical methods for assessing the levels of organic pollutants in the atmosphere: PAH, phthalates and psychotropic substances: a short review

This short review presents the procedures used to monitor PAHs, phthalates and psychotropic substances in the air, and the results of some measurements made in Italy and abroad. Organic contaminants are characterized by a variety of physical and chemical properties, including aggregation phase, concentration level, and life time. This variety widens the spectrum of procedures developed to assess their occurrence in the environment and biota, but prevents the complete speciation of the "organic fraction" of air, waters and particulates, and attention is paid to a few substances. The progress in health sciences stimulates the concern on contaminants and the development of new instrumental apparatuses and methods; new chemicals are continuously identified or recognized as capable of injuring the environment and organisms. Persistent organic pollutants and persistent biologically active toxicants are subject to regulation and extensively measured by means of standard procedures. For instance, polycyclic aromatic hydrocarbons, polychlorobiphenyls and polychlorodibenzodioxins are recovered from air through phase partition, thermal desorption or solvent extraction, then separated and detected through GC-MS or HPLC-MS procedures. By contrast, dedicated methods must be still optimized to monitor candidates or possible candidates as emerging organic pollutants, e.g. phthalates, flame retardants and perfluoroalkanes. Also, psychotropic substances appear of potential concern. Legal and illicit substances are commonly detected in the urban air besides waste and surface waters. If nicotine, caffeine and cocaine will result to enough persistence in the air, their monitoring will become an important issue of global chemical watching in the next future.     

Probability density function of non-reactive solute concentration in heterogeneous porous formations

Available models of solute transport in heterogeneous formations lack in providing complete characterization of the predicted concentration. This is a serious drawback especially in risk analysis where confidence intervals and probability of exceeding threshold values are required. Our contribution to fill this gap of knowledge is a probability distribution model for the local concentration of conservative tracers migrating in heterogeneous aquifers. Our model accounts for dilution, mechanical mixing within the sampling volume and spreading due to formation heterogeneity. It is developed by modeling local concentration dynamics with an Ito Stochastic Differential Equation (SDE) that under the hypothesis of statistical stationarity leads to the Beta probability distribution function (pdf) for the solute concentration. This model shows large flexibility in capturing the smoothing effect of the sampling volume and the associated reduction of the probability of exceeding large concentrations. Furthermore, it is fully characterized by the first two moments of the solute concentration, and these are the same pieces of information required for standard geostatistical techniques employing Normal or Log-Normal distributions. Additionally, we show that in the absence of pore-scale dispersion and for point concentrations the pdf model converges to the binary distribution of [Dagan, G., 1982. Stochastic modeling of groundwater flow by unconditional and conditional probabilities, 2, The solute transport. Water Resour. Res. 18 (4), 835-848.], while it approaches the Normal distribution for sampling volumes much larger than the characteristic scale of the aquifer heterogeneity. Furthermore, we demonstrate that the same model with the spatial moments replacing the statistical moments can be applied to estimate the proportion of the plume volume where solute concentrations are above or below critical thresholds. Application of this model to point and vertically averaged bromide concentrations from the first Cape Cod tracer test and to a set of numerical simulations confirms the above findings and for the first time it shows the superiority of the Beta model to both Normal and Log-Normal models in interpreting field data. Furthermore, we show that assuming a-priori that local concentrations are normally or log-normally distributed may result in a severe underestimate of the probability of exceeding large concentrations.     

Poly(lactic acid)-Based Composites Containing Natural Fillers: Thermal,Mechanical and Barrier Properties

Natural filler/poly(lactic acid)-Based composites have been prepared by melt blending in order to investigate the resulting thermal, mechanical, and oxygen permeability properties. To this aim, several wastes or by-products (namely, cellulose fibers, wood sawdust, hazelnut shells, flax fibers, corn cob and starch) have been used, ranging from 10 to 30 wt%. The presence of these fillers is responsible of a slight reduction of the polymer degradation temperature in nitrogen as well as of a significant increase of the storage modulus as a function of the filler content. The experimental data obtained by dynamic mechanical analysis have been mathematically fitted, employing three micromechanical models (namely, Voigt, Reuss and Halpin–Tsai). Furthermore, the presence of cellulose or starch has turned out to significantly reduce the polymer oxygen permeability. Finally, in order to fully assess the feasibility of such materials, an economic analysis has been carried out and discussed.     

Preliminary study on persistence in soil and residues in maize of imidacloprid

The aim of this work was to study the distribution of imidacloprid in soil and its translocation to roots and aerial parts of maize plant. The main objective was to assess imidacloprid residues in field environment, in order to provide data on honeybees exposure level to such an active substance. Imidacloprid has been detected and quantified by Triple Quadrupole HPLC-MS-MS. Pesticide persistence in the soil and its residues in pollen and in maize plants have been evaluated during the growing of maize plants developed from seeds dressed with Gaucho 350 FS (imidacloprid: 1.0 mg/seed). The sowing has been performed by means of a pneumatic precision drill. Samples have been collected at 30, 45, 60, 80, 130 days after the sowing, as pollen samples have been collected at the tasseling. Imidacloprid presence in aerial part of maize plant declined to 2-3 μg/kg 80 days after the sowing, while concentration in kernel at harvest was <1 μg/kg. Maize pollen represents an important part of protein supply of beehives, and it is of critical importance to bee foraging. The values detected (imidacloprid residues <1 μg/kg) showed that maize pollen source should not be relevant for acute toxicity impact on honey bees.     

Effects of the herbicide molinate on the metabolic activities of a degradative Streptomyces griseus strain

Abstract

Cometabolic degradation of the herbicide molinate was tested using two microorganisms, Arthrobacter sp., strain M3 and Streptomyces griseus strain M2; the latter classified on the basis of the presence of the enzymatic cofactor SF‐420. The strains M3 and M2, inoculated in a basic salts medium with glucose as carbon source and added with 100 mg L^‐1 of molinate, degraded respectively 35 and 51% of the herbicide in 36 days.

Increasing concentrations of molinate, ranging from 50 to 200 mg L^‐1 in glucose medium, did not affect the final ATP yield of the strain M2, but decreased the final growth yield and the ATP synthesis rate. Moreover, the onset of coenzyme SF‐420 synthesis was progressively delayed.

In contrast, surprisingly, SF‐420 final yield and production rate were increased by progressive increasing concentrations of molinate in the mineral medium.     

Applications of chitosan to the roots and shoots change the accumulation pattern of cadmium in Talinum patens (Talinaceae) cuttings

Environmental Science and Pollution Research - Chitosan induces tolerance to abiotic stress agents in plants. However, studies on the different application forms of this biopolymer are limited....     

Acid soluble bio-organic substances isolated from urban bio-waste. Chemical composition and properties of products

As previous work proposed commercial expectations for soluble bio-organic substances (SBO) isolated from compost of urban food, gardening and park trimming residues as chemical auxiliaries, nine urban bio-wastes (BW) treated by aerobic and anaerobic digestion for 0-360 days were used to extract SBO and investigate source variability effects on product chemical composition and properties. The bio-wastes were collected over a 13732 km² area populated by 2.9 millions from 565 municipalities. The SBO were characterized by their content of different C types and functional groups and by their distribution coefficient (K_PEGW) between polyethylene glycol and water. A significant linear correlation was found between K_PEGW and the lipophilic/hydrophilic C ratio. The investigated SBO exhibited up to sixfold change of K_PEGW demonstrating that BW available from densely populated urban areas are an interesting exploitable source of a wide variety of potential products for the chemical market.