The fate of metal contaminated sediments in Foundry Cove, New York

The distribution of heavy metal contaminated sediments in Foundry Cove, a freshwater embayment of the Hudson River, was examined twelve years after the discharging of wastes from a battery factory had ceased. Concentrations of Cd, Ni and Co were measured in surficial sediments (top 5 cm) and seven detailed depth profiles. Comparison with earlier surveys showed that metal levels of surficial sediments have been considerably reduced throughout the cove. Evidence suggests that this reduction may be largely due to burial rather than transport of metals out of the cove or a redistribution (via sediment resuspension and redeposition) within the cove. This is suggested by the presence of a peak in metal concentrations at a depth of several centimetres in depositional environments, a calculation showing the loss of waterborne cadmium to be much less than the amount of cadmium lost from the surficial sediment, and the absence of increased pollution in the cleaner parts of the cove. Despite improvement, metal levels remain extremely high, including a persistent 'hot-spot' with levels higher than 10 000 ppm Cd.     

Liquid chromatography study of pyrene degradation by two micromycetes in a freshwater sediment.

Pyrene biodegradation in a freshwater sediment without fungi supply, or inoculated with two sediment micromycetes, Mucor racemosus var. sphaerosporus and Phialophora alba was studied after 0, 5, 13, 28, 60 and 90 days. The influence of glucose addition was estimated, and a liquid chromatographic method for simultaneous quantitative determination of residual anthracene, fluoranthene and pyrene in the sediment was developed. Samples with PAHs were extracted in Soxhlet with ethyl acetate, and LC analysis was performed on a 5 microm Supelcosil column (150 x 4.6 mm I.D.) with gradient elution (2 ml min(-1)) of acetonitrile-water and UV detection at 254 nm. Recoveries of anthracene, fluoranthene and pyrene were 90.3%+/-1.1%, 93.2%+/-0.9% and 90.42%+/-1.9%, respectively, without interference. The native sediment microorganisms (with or without glucose added) have shown 35% pyrene degradation and sediment with glucose inoculated by the strains revealed 40%.     

In situ assays with tropical cladocerans to evaluate edge-of-field pesticide runoff toxicity

Tropical regions’ economy is usually based on agriculture, which involves an intensive use, and even frequent overuse, of pesticides. Nevertheless, not much research has been done on the impact of pesticides on tropical aquatic ecosystems, which are often contaminated by runoff-related pesticide inputs due to unpredictable and torrential rainfalls. This study aimed to: (i) adapt and evaluate a short-term sublethal in situ assay using post-exposure feeding as an endpoint, to the tropical cladoceran species Diaphanosoma brachyurum (collected at the Pedra do Cavalo dam in the Paraguaçu River basin, Bahia, Brazil), and, (ii) assess the role of the standard species Daphnia magna as an adequate laboratory surrogate. Lethal and sublethal (post-exposure feeding) responses were assessed for the two species. To evaluate these responses under environmentally realistic exposure conditions, a runoff event was simulated in an agricultural area previously contaminated with different deltamethrin concentrations. The resultant runoff water was used to set up microcosms with different dilutions, simulating the entrance of runoff water in an adjacent lentic system. An in situ assay with D. brachyurum was performed inside the microcosms, allowing to discriminate the effects due to deltamethrin from those due to other potential stressors associated with the experimental design (e.g. organism handling, load of suspended particles, microcosm design). Water samples were collected from microcosms to conduct a laboratory assay with D. magna. The in situ methodologies revealed to be suitable to conduct assays with D. brachyurum under tropical conditions, since all exposed organisms were successfully retrieved from the chambers. Furthermore, none of the potential stressors associated with the experimental design influenced the daphnids’ performance. The tropical cladoceran species, exposed under more realistic conditions, revealed to be more sensitive than the laboratory standard species: lethal effects were only observed for D. brachyurum and sublethal effects were noticed at a lower deltamethrin concentration for this species than for D. magna.     

The influence of gill and liver metabolism on the predicted bioconcentration of three pharmaceuticals in fish

The potential for xenobiotic compounds to bioconcentrate is typically expressed through the bioconcentration factor (BCF), which has gained increased regulatory significance over the past decade. Due to the expense of in vivo bioconcentration studies and the growing regulatory need to assess bioconcentration potential, BCF is often calculated via single-compartment models, using K(OW) as the primary input. Recent efforts to refine BCF models have focused on physiological factors, including the ability of the organism to eliminate the compound through metabolic transformation. This study looks at the ability of in vitro biotransformation assays using S9 fractions to provide an indication of metabolic potential. Given the importance of the fish gill and liver in metabolic transformation, the metabolic loss of ibuprofen, norethindrone and propranolol was measured using rainbow trout (Oncorhynchus mykiss) and channel catfish (Ictalurus punctatus) gill and liver S9 fractions. Metabolic transformation rates (k(M)) were calculated and integrated into a refined BCF model. A significant difference was noted between BCF solely based on K(OW) and BCF including k(M). These studies indicate that the inclusion of k(M) in BCF models can bring predicted bioconcentration estimates closer to in vivo values.     

The solid-phase controls on the mobility of heavy metals at the Copper Cliff tailings area, Sudbury, Ontario, Canada

The Copper Cliff Tailings Disposal Area, located near Sudbury, Ontario, covers an area of approximately 2200 ha and constitutes more than 10% of the total area of all mine tailings in Canada. The area has been utilized since 1936, receiving sulphide-containing tailings from the Inco Sudbury operations. Field measurements of pore-gas oxygen and carbon dioxide in the vadose zone indicate that sulphide oxidation has progressed to depths of 1.6 m to 1.7 m within the tailings. The oxidation of sulphide minerals within the vadose zone, and the accompanying dissolution of carbonate and aluminosilicate minerals within these tailings releases SO₄, Fe(II) and other metals to the pore water. In the vadose and saturated zones, concentrations of Fe and Ni exceed 10100 mg/l and 2210 mg/l, respectively. These high concentrations of dissolved metals are attenuated by a series of precipitation, coprecipitation and adsorption reactions. The precipitation of secondary sulphate and hydroxide phases also create hardpan layers at or near the oxidation front. Geochemical modelling of the pore-water chemistry suggests that pH-buffering reactions are occurring within the shallow oxidized zones, and that secondary-phase precipitation is occurring at or near the underlying hardpan and transition zones. Mineralogical study of the tailings confirmed the presence of jarosite, gypsum and goethite within the shallow tailings, suggesting that these phases are controlling the dissolved concentrations of Fe, SO₄ and Ca. Extraction experiments conducted on the tailings solids indicate that the constituents contained in the water-soluble fraction of the shallow, weathered tailings are derived from the original pore water and the dissolution of highly soluble phases such as gypsum. The acid-leachable fraction of the weathered tailings accounts for up to 25% of the heavy metals, and the reducible fraction may contain up to 100% of the heavy metals within the shallow, weathered tailings. Based on the pore water profiles and the geochemistry of the tailings solids, a relative mobility scale of Fe=Mn=Ni=Co>Cd Zn>Cr=Pb>Cu can be determined.     

Acute toxicity of aromatic and non-aromatic fractions of naphthenic acids extracted from oil sands process-affected water to larval zebrafish

The toxicity of oil sands process-affected water (OSPW) has regularly been attributed to naphthenic acids, which exist in complex mixtures. If on remediation treatment (e.g., ozonation) or on entering the environment, the mixtures of these acids all behave in the same way, then they can be studied as a whole. If, however, some acids are resistant to change, whilst others are not, or are less resistant, it is important to establish which sub-classes of acids are the most toxic.     

Occurrence and treatment trials of endocrine disrupting chemicals (EDCs) in wastewaters

This study demonstrates that both synthetic and natural endocrine disrupting chemicals (EDCs) (e.g., bisphenol A, estrone and 17beta-estradiol) were found in the crude wastewaters from two wastewater treatment works (WwTWs). Conventional biological processes can lower EDCs concentrations to several tens to hundreds ngl(-1). Since natural EDCs (e.g., estrone and 17beta-estradiol) have biological activity and adverse impact on the environment at extremely low concentrations (several tens of ngl(-1)), further treatment after conventional biological processes is required. Preliminary trials with ferrate(VI) and electrochemical oxidation process demonstrated that both processes can effectively reduce EDCs to very low levels, ranging between 10 and 100ngl(-1), but the former is more effective than the latter to reduce COD concentration in wastewater for given studying conditions.     

Biosensors for detection of mercury in contaminated soils

Biosensors based on whole bacterial cells and on bacterial heavy metal binding protein were used to determine the mercury concentration in soil. The soil samples were collected in a vegetable garden accidentally contaminated with elemental mercury 25 years earlier. Bioavailable mercury was measured using different sensors: a protein-based biosensor, a whole bacterial cell based biosensor, and a plant sensor, i.e. morphological and biochemical responses in primary leaves and roots of bean seedlings grown in the mercury-contaminated soil. For comparison the total mercury concentration of the soil samples was determined by AAS. Whole bacterial cell and protein-based biosensors gave accurate responses proportional to the total amount of mercury in the soil samples. On the contrary, plant sensors were found to be less useful indicators of soil mercury contamination, as determined by plant biomass, mercury content of primary leaves and enzyme activities.     

Effects of EDTA and low molecular weight organic acids on soil solution properties of a heavy metal polluted soil

A pot experiment was conducted to study the effects of EDTA and low molecular weight organic acids (LMWOA) on the pH, total organic carbon (TOC) and heavy metals in the soil solution in the rhizosphere of Brassica juncea grown in a paddy soil contaminated with Cu, Zn, Pb and Cd. The results show that EDTA and LMWOA have no effect on the soil solution pH. EDTA addition significantly increased the TOC concentrations in the soil solution. The TOC concentrations in treatments with EDTA were significantly higher than those in treatments with LMWOA. Adding 3 mmol kg(-1) EDTA to the soil markedly increased the total concentrations of Cu, Zn, Pb and Cd in the soil solution. Compared to EDTA, LMWOA had a very small effect on the metal concentrations. Total concentrations in the soil solution followed the sequence: EDTA > citric acid (CA) approximately oxalic acid (OA) approximately malic acid (MA) for Cu and Pb; EDTA > MA > CA approximately OA for Zn; and EDTA > MA > CA > OA for Cd. The labile concentrations of Cu, Zn, Pb and Cd showed similar trends to the total concentrations.