An assessment of heavy metal contamination in surface sediment using statistical analysis

The distribution and accumulation of heavy metals in the sediments, especially those nearest of wastewater discharges of south of Spain, were investigated. Sediment samples from 14 locations were collected and characterised for metal content (e.g. Ni, Cu, Zn, Cr, Pb, Mn, Cd and Hg), organic carbon, total nitrogen, total phosphorous, n-hexane-extractable material, carbonates and grain size. Concentration data were processed using correlation analysis and factor analysis. The correlation analysis of concentrations data showed important positive correlations among organic carbon, total phosphorus, Cu, Zn, Cd and Hg, otherwise weak correlations among Mn, Cr, Ni and CO₃ ^2???, indicating that these metals have complicated geochemical behaviours. The use of statistical factor analysis also confirmed these results. Sediments pollution assessment was carried out using geoaccumulation and metal pollution indexes (MPI₈). The results revealed that sediments of Cádiz bay and Sancti Petri channel were uncontaminated with the studied metals.     

Multiscale satellite and spatial information and analysis framework in support of a large-area forest monitoring and inventory update

Many countries undertake a national forest inventory to enable statistically valid monitoring in support of national and international reporting of forest conditions and change. Canada’s National Forest Inventory (NFI) program is designed to operate on a 10-year remeasurement cycle, with an interim report produced at the 5-year mid-point. The NFI is a sample-based inventory, with approximately 18,850 2 ×2-km photo plots across the country, distributed on a 20×20-km grid of sample points; these photo plots are the primary data source for the NFI. Capacity to provide annual monitoring information is required to keep policy and decision makers apprised of current forest conditions. In this study, we implemented a multistage monitoring framework and used a Moderate Resolution Imaging Spectroradiometer (MODIS) change product to successfully identify 78% of the changes in forest cover area that were captured with a Landsat change detection approach. Of the NFI photo plots that were identified by both the Landsat and MODIS approaches as having changes in forest cover, the proportion of change area within the plots was similar (R ²?=?0.78). Approximately 70% of the Landsat-derived change events occupied less than 40% of a single MODIS pixel, and more than 90% of the change events of this size were successfully detected with the MODIS product. Finally, MODIS estimates of the proportion of forest cover change at the NFI photo plot level were comparable to change estimates for the ecoregions as a whole (R ²?=?0.95). High-temporal, low-spatial resolution imagery such as MODIS, in combination with other remotely sensed data sources, can provide information on disturbance events within a national forest inventory remeasurement cycle, thereby satisfying the interim information needs of policy and decision makers as well as the requirements of national and international reporting commitments.     

Emissions of SO2, NO x and particulates from a pipe manufacturing plant and prediction of impact on air quality

Integrated pipe manufacturing industry is operation intensive and has significant air pollution potential especially when it is equipped with a captive power production facility. Emissions of SO₂, NO _x , and particulate matter (PM) were estimated from the stationary sources in a state-of-the-art pipe manufacturing plant in India. Major air polluting units like blast furnace, ductile iron spun pipe facility, and captive power production facility were selected for stack gas monitoring. Subsequently, ambient air quality modeling was undertaken to predict ground-level concentrations of the selected air pollutants using Industrial Source Complex (ISC 3) model. Emissions of SO₂, NO _x , and particulate matter from the stationary sources in selected facilities ranged from 0.02 to 16.5, 0.03 to 93.3, and 0.09 to 48.3 kg h^???1, respectively. Concentration of SO₂ and NO _x in stack gas of 1,180-kVA (1 KW = 1.25 kVA) diesel generator exceeded the upper safe limits prescribed by the State Pollution Control Board, while concentrations of the same from all other units were within the prescribed limits. Particulate emission was highest from the barrel grinding operation, where grinding of the manufactured pipes is undertaken for giving the final shape. Particulate emission was also high from dedusting operation where coal dust is handled. Air quality modeling indicated that maximum possible ground-level concentration of PM, SO₂, and NO _x were to the tune of 13, 3, and 18 μg/m³, respectively, which are within the prescribed limits for ambient air given by the Central Pollution Control Board.     

Reproductive endocrine disruption in smallmouth bass (Micropterus dolomieu) in the Potomac River basin: spatial and temporal comparisons of biological effects

A high prevalence of intersex or testicular oocytes (TO) in male smallmouth bass within the Potomac River drainage has raised concerns as to the health of the river. Studies were conducted to document biomarker responses both temporally and spatially to better understand the influence of normal physiological cycles, as well as water quality and land-use influences. Smallmouth bass were collected over a 2-year period from three tributaries of the Potomac River: the Shenandoah River, the South Branch Potomac and Conococheague Creek, and an out-of-basin reference site on the Gauley River. The prevalence of TO varied seasonally with the lowest prevalence observed in July, post-spawn. Reproductive maturity and/or lack of spawning the previous spring, as well as land-use practices such as application of manure and pesticides, may influence the seasonal observations. Annual, seasonal, and site differences were also observed in the percentage of males with measurable concentrations of plasma vitellogenin, mean concentration of plasma vitellogenin in females, and plasma concentrations of 17β-estradiol and testosterone in both sexes. Bass collected in the South Branch Potomac (moderate to high prevalence of TO) had less sperm per testes mass with a lower percentage of those sperm being motile when compared to those from the Gauley River (low prevalence of TO). An inverse relationship was noted between TO severity and sperm motility. An association between TO severity and wastewater treatment plant flow, percent of agriculture, total number of animal feeding operations, the number of poultry houses, and animal density within the catchment was observed.     

Natural resources assessment and their utilization

The present paper quantifies and reviews the natural resource use in the Himalayan state of Himachal Pradesh (HP). Twenty-five percent of the geographical area of HP is under forests and harbour ca. 3,400 plant species. The available bioresources not only support the livelihood of nearly 6 million people but also fulfill the forage requirement of 5.2 million livestock. Thus, dependence on bioresources is manifold. Based on field surveys to different localities of HP and analyses of published information, two types of resource use patterns have been identified. One, the direct use of forest resources which is represented by extraction of timber, fuelwood and fodder; and the second represents indirect resource use from the forest that is represented by activities related to agriculture, tourism and industry. Amongst the direct resource use, annual timber requirement of the local people works out to be 310,063 m(3). On the other hand, annual fuelwood and fodder requirement of local people is to the tune of 3,646,348.8 and 10,294,116.5 tons, respectively. Extraction of fodder therefore appears to be one of the main reasons for forest degradation in HP as opposed to timber and fuelwood extraction. However, compared to direct resource use, indirect resource use and pressures have far more pronounced effect on the forests. Of the indirect pressures, shifts in agriculture patterns and increased tourism seem to be the most prominent.     

Characterization of organic chemical contaminants in sediments from Jobos Bay, Puerto Rico

Jobos Bay, located on the southeastern coast of Puerto Rico, contains a variety of habitats including mangroves, seagrass meadows, and coral reefs. The watershed surrounding the bay includes a number of towns, agricultural areas, and the Jobos Bay National Estuarine Research Reserve (NERR). Jobos Bay and the surrounding watershed are part of a Conservation Effects Assessment Project (CEAP), involving the Jobos Bay NERR, the US Department of Agriculture, and the National Oceanic and Atmospheric Administration (NOAA) to assess the benefits of agricultural best management practices (BMPs) on the terrestrial and marine environments. As part of the Jobos Bay CEAP, NOAA collected sediment samples in May 2008 to characterize over 130 organic chemical contaminants. This paper presents the results of the organic contaminant analysis. The organic contaminants detected in the sediments included polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls, and the pesticide DDT. PAHs at one site in the inner bay near a boat yard were significantly elevated; however, all organic contaminant classes measured were below NOAA sediment quality guidelines that would have indicated that impacts were likely. The results of this work provide an important baseline assessment of the marine environment that will assist in understanding the benefits of implementing BMPs on water quality in Jobos Bay.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

Bio-monitoring for uranium using stream-side terrestrial plants and macrophytes

This study evaluated the abilities of various plant species to act as bio-monitors for environmental uranium (U) contamination. Vegetation and soil samples were collected from a U processing facility. The water-way fed from facility storm and processing effluents was the focal sample site as it represented a primary U transport mechanism. Soils and sediments from areas exposed to contamination possessed U concentrations that averaged 630 mg U kg(-1). Aquatic mosses proved to be exceptional accumulators of U with dry weight (dw) concentrations measuring as high as 12,500 mg U kg(-1) (approximately 1% of the dw mass was attributable to U). The macrophytes (Phragmites communis, Scripus fontinalis and Sagittaria latifolia) were also effective accumulators of U. In general, plant roots possessed higher concentrations of U than associated upper portions of plants. For terrestrial plants, the roots of Impatiens capensis had the highest observed levels of U accumulation (1030 mg kg(-1)), followed by the roots of Cyperus esculentus and Solidago speciosa. The concentration ratio (CR) characterized dry weight (dw) vegetative U levels relative to that in associated dw soil. The plant species that accumulated U at levels in excess of that found in the soil were: P. communis root (CR, 17.4), I. capensis root (CR, 3.1) and S. fontinalis whole plant (CR, 1.4). Seven of the highest ten CR values were found in the roots. Correlations with concentrations of other metals with U were performed, which revealed that U concentrations in the plant were strongly correlated with nickel (Ni) concentrations (correlation: 0.992; r-squared: 0.984). Uranium in plant tissue was also strongly correlated with strontium (Sr) (correlation: 0.948; r-squared: 0.899). Strontium is chemically and physically similar to calcium (Ca) and magnesium (Mg), which were also positively-correlated with U. The correlation with U and these plant nutrient minerals, including iron (Fe), suggests that active uptake mechanisms may influence plant U accumulation.     

Wasteload Allocation Using Wastewater Treatment and Flow Augmentation

A Wasteload allocation model, named Cost-Flow-Augmentation Model involving wastewater treatment and flow augmentation as a method of pollution abatement has been developed. The cost functions for wastewater treatment were developed as power functions of biochemical oxygen demand (BOD) removal using the regression module of the SPSS10 software. The cost function for flow augmentation was also developed using a regression between cost of dam/barrage and corresponding flow released from upstream reservoir for downstream water quality improvement. The response of wasteloads and flow augmentation on the water quality was quantified in terms of transfer coefficient calculated using the QUAL2E water quality simulation model. The performance of these models is demonstrated on the 22-km-long Delhi stretch of river Yamuna, India. Optimal solutions of the formulated models were obtained using the Web-based interactive non-differentiable interactive multiobjective bundle-based optimization system software. The optimal solutions obtained reveal that flow augmentation is not an economically feasible pollution abatement option for the Delhi stretch of river Yamuna.