South Pole Antarctica observations and modeling results: New insights on HOx radical and sulfur chemistry

Measurements of OH, H₂SO₄, and MSA at South Pole (SP) Antarctica were recorded as a part of the 2003 Antarctic Chemistry Investigation (ANTCI 2003). The time period 22 November, 2003–2 January, 2004 provided a unique opportunity to observe atmospheric chemistry at SP under both natural conditions as well as those uniquely defined by a solar eclipse event. Results under natural solar conditions generally confirmed those reported previously in the year 2000. In both years the major chemical driver leading to large scale fluctuations in OH was shifts in the concentration levels of NO. Like in 2000, however, the 2003 observational data were systematically lower than model predictions. This can be interpreted as indicating that the model mechanism is still missing a significant HO_x sink reaction(s); or, alternatively, that the OH calibration source may have problems. Still a final possibility could involve the integrity of the OH sampling scheme which involved a fixed building site. As expected, during the peak in the solar eclipse both NO and OH showed large decreases in their respective concentrations. Interestingly, the observational OH profile could only be approximated by the model mechanism upon adding an additional HO_x radical source in the form of snow emissions of CH₂O and/or H₂O₂. This would lead one to think that either CH₂O and/or H₂O₂ snow emissions represent a significant HO_x radical source under summertime conditions at SP. Observations of H₂SO₄ and MSA revealed both species to be present at very low concentrations (e.g., 5 × 10⁵ and 1 × 10⁵ molec cm^?3, respectively), but similar to those reported in 2000. The first measurements of SO₂ at SP demonstrated a close coupling with the oxidation product H₂SO₄. The observed low concentrations of MSA appear to be counter to the most recent thinking by glacio-chemists who have suggested that the plateau's lower atmosphere should have elevated levels of MSA. We speculate here that the absence of MSA may reflect efficient atmospheric removal mechanisms for this species involving either dynamical and/or chemical processes.     

Use of CALPUFF for exposure assessment in a near-field,complex terrain setting

CALPUFF is an atmospheric source-receptor model recommended by the U.S. Environmental Protection Agency for use on a case-by-case basis in complex terrain and wind conditions. The ability of the model to provide useful information for exposure assessments in areas with those topographical and meteorological conditions has received little attention. This is an important knowledge gap for use of CALPUFF outside of regulatory applications, such as exposure analyses conducted in support of risk assessments and health studies. We compared deposition of cadmium (Cd), lead (Pb), and zinc (Zn) calculated with CALPUFF as a result of emissions from a zinc smelter with corresponding concentrations of the metals measured in attic dust and soil samples obtained from the surrounding area. On a point-by-point analysis, predictions from CALPUFF explained 11% (lead) to 53% (zinc) of the variability in concentrations measured in attic dust. Levels of heavy metals in soil interpolated to 100 residential addresses from the distribution of concentrations measured in soil samples also agreed well with deposition predicted with CALPUFF: R² of 0.46, 0.76, and 079 for Pb, Cd, and Zn, respectively. Community-average concentrations of Cd, Pb, and Zn measured in soil were significantly (p < 0.0001) and strongly correlated (R² ranged from 0.77 to 0.98) with predicted deposition rates. These findings demonstrate that CALPUFF can provide reasonably accurate predictions of the patterns of long-term air pollutant deposition in the near-field associated with emissions from a discrete source in complex terrain. Because deposition estimates are calculated as a linear function of air concentrations, CALPUFF is expected to be reliable model for prediction of long-term average, near-field ambient air concentrations in complex terrain as well.     

Spatial variability of carbonaceous aerosols and associated source tracers in two cites in the Midwestern United States

Semi-continuous and 24-h averaged measurements of fine carbonaceous aerosols were made concurrently at three sites within each of two U.S. Midwestern Cities; Detroit, Michigan and Cleveland, Ohio; during two, one-month intensive campaigns conducted in July of 2007 and January & February of 2008. A comparison of 24-h measurements revealed substantial intra-urban variability in carbonaceous aerosols consistent with the influence of local sources, and excesses in both PM_2.5 organic carbon (OC) and elemental carbon (EC) were identified at individual sites within each city. High time-resolved black carbon (BC) measurements indicated that elemental carbon concentrations were higher at sites adjacent to freeways and busy surface streets, and temporal patterns suggested that excess EC at sites adjacent to freeways was dominated by mobile source emissions while excesses in EC away from traffic corridors was dominated by point/area source emissions. The site-to-site variability in OC concentrations was approximately 7% within the neighborhood scale (0.5–4 km) and between 4 and 27% at the urban scale (4–100 km). In contrast, measurements of organic source tracers, in conjunction with a Chemical Mass Balance (CMB) source-apportionment model, indicated that the spatial variation in the contribution of both mobile and stationary sources to PM_2.5 OC often exceeded the variation in OC mass concentration by a factor of 3 or more. Markers for mobile sources, biomass smoke, natural gas, and coal combustion differed by as much as 60% within the neighborhood scale and by greater than 200% within the urban scale. The observations made during this study suggest that the urban excess of carbonaceous aerosols is much more complex than has been previously reported and that a more rigorous, source-oriented approach should be taken in order to assess the risk associated with exposure to carbonaceous aerosols within the industrialized environments of the Midwestern United States.     

Overcoming latecomer disadvantage through learning processes: Taiwan’s venture into wind power development

Research into national innovation systems (NISs) has received extensive academic and policy attention, and is especially relevant with latecomer countries seeking to innovate in challenging industrial environments. In playing catch up with their early industrializing counterparts, methods of learning take on increased importance in determining industrial success for latecomers. The wind turbine technology innovation system is one that is highly dependent on both the extent of the national learning processes and the strength of the national social-institutional setting. This research investigates the case of Taiwan, a country which has embarked on a program to build its national innovative capacity in wind turbine technologies with specific emphasis on Taiwan’s social sector. Within this system, the spotlight will be on four types of learning processes that interplay during wind turbine development: learning by searching, learning by doing, learning by using, and learning by interacting. Through a case study of the emergence of Taiwan’s burgeoning large-scale wind power technology initiatives, the paper aims to add to the understanding on how methods of learning impact upon the success of innovation systems. The findings show that the industry’s future prospects are constrained because of the limited learning by interacting processes between turbine component producers, turbine owners, and researchers and because of weaknesses in the institutional framework. This research also recognizes the importance that culture has on dominant forms of learning.     

Sex-specific predation on two lizard species by kestrels

Sex-biased predation is thought to have important implications for sexual selection, sex allocation, and population dynamics (Magnhagen, 1991; Le-Galliard et al., 2005 for an example in lizards). Most studies found that males are subjected to higher predation pressure than females during the reproductive season (Korpimäki, 1985; Lodé et al., 2004; Christe et al., 2006; Costantini et al., 2007). In that period, males are very mobile, emit acoustic signals and exhibit brilliant colourations, which are needed to attract females but may make them more visible to predators. With regard to lizards, a recent study provided the first evidence that males of a lizard species may be preyed on more than females (Costantini et al., 2007). In the present study, we investigated whether there is sex-biased predation on two small lacertid species, the common wall lizard Podarcis muralis (Laurenti, 1768) and the Italian wall lizard Podarcis sicula (Rafinesque-Schmaltz, 1810), by Eurasian kestrels (Falco tinnunculus) during the reproductive season. We also examined whether (1) the rate of predation differed between species and (2) the rate of predation differed across years or among hunting habitats for each species.     

Enhancing consultation practices on Air Quality Management in local authorities

Schedule 11 of the Environment Act 1995 underpins the requirement for consultation on air quality issues. The ongoing air quality review and assessment process represents one of the largest locally based science policy and communication initiatives ever undertaken in the UK. This paper outlines the practice of consultation and communication for Air Quality Management (AQM) and reviews the interaction between Environmental Health professionals, as the leading actor in the AQM process and other stakeholders involved in air quality consultation, including the public. Results are presented from a widespread questionnaire survey of English local authorities. Data indicate that the majority of air quality consultation has been carried out with statutory consultees (by sending the review and assessment reports) and the public (via websites and leaflets) in the form of information dissemination.     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

Evaluating the capabilities of Aerosol-to-Liquid Particle Extraction System (ALPXS)/ICP-MS for monitoring trace metals in indoor air

This study investigates the application of the Aerosol-to-Liquid Particle Extraction System (ALPXS), which uses wet electrostatic precipitation to collect airborne particles, for multi-element indoor stationary monitoring. Optimum conditions are determined for capturing airborne particles for metal determination by inductively coupled plasma–mass spectrometry (ICP-MS), for measuring field blanks, and for calculating limits of detection (LOD) and quantification (LOQ). Due to the relatively high flow rate (300 L min^?1), a sampling duration of 1 hr to 2 hr was adequate to capture airborne particle-bound metals under the investigated experimental conditions. The performance of the ALPXS during a building renovation demonstrated signal-to-noise ratios appropriate for sampling airborne particles in environments with elevated metal concentrations, such as workplace settings. The ALPXS shows promise as a research tool for providing useful information on short-term variations (transient signals) and for trapping particles into aqueous solutions where needed for subsequent characterization. As the ALPXS does not provide size-specific samples, and its efficiency at different flow rates has yet to be quantified, the ALPXS would not replace standard filter-based protocols accepted for regulatory applications (e.g., exposure measurements), but rather would provide additional information if used in conjunction with filter based methods.

ImplicationsThis study investigates the capability of the Aerosol-to-Liquid Particle Extraction System (ALPXS) for stationary sampling of airborne metals in indoor workplace environments, with subsequent analysis by ICP-MS. The high flow rate (300 L/min) permits a short sampling duration (< 2 hr). Results indicated that the ALPXS was capable of monitoring short-term changes in metal emissions during a renovation activity. This portable instrument may prove to be advantageous in occupational settings as a qualitative indicator of elevated concentrations of airborne metals at short time scales.     

Once there was a river: a benefit–cost analysis of rehabilitation of the Jordan River

The Jordan River is among the world’s most famous and culturally and historically significant waterways. The lower stretch of the river, however, has been a victim of development in a water scarce region, with current flows less than 5 % of historical levels. Furthermore, as it functions as an international border in a region of conflict, access to the river and its potential as a tourist attraction has been limited. Recently, there have been numerous calls for rehabilitation of the river. This study presents a first estimate of the economic benefits of such rehabilitation and compares them to the estimated costs. Identical contingent valuation method surveys were administered in Israel, Jordan, and the Palestinian Authority. Evidence from this study shows that, despite the large opportunity costs of increasing environmental flows, rehabilitation of the lower Jordan would produce positive net economic benefits. This is true even though the study estimated only the benefits to local populations, and not to international tourists or those outside the region. Net benefits are maximized when taking a regional, as opposed to strictly national, approach.     

A survey-based evaluation of community-based co-management of forest resources: a case study of Baishuijiang National Natural Reserve in China

Community-based co-management (CBCM) mechanisms for forest management have matured through the development of new economic analysis and common property theory. However, while many local CBCM mechanisms have been initiated in Chinese Natural Reserves, there are few objective, data-based evaluations of whether these mechanisms improve forest conservation and local livelihoods. This research uses Baishuijiang National Natural Reserve (BNNR) as a study case to evaluate China’s current CBCM mechanisms. The evaluation is based mainly on three criteria: efficiency, equality and sustainability of project operation. Survey data indicate that local CBCM mechanisms provide a wide-participation platform for local villagers, associated administration managers, research institutions and NGOs to join in forest resource protection work while improving local livelihood. CBCM projects have also facilitated a reduction in forest resource dependency, the improvement of household income and encouragement of local people to participate in forest resource protection. Our analysis suggests that most CBCM organizations have made progress in efficiency, equity and sustainability. However, further study should focus on how to deal with the lingering problems of inequity in responsibility and rights among CBCM committee members, poor distribution of benefits, insufficient program-design and management expertise, faulty information dissemination, and insufficient capital investment.