Recreational impacts on backcountry campsites in Grand Canyon National Park,Arizona, USA

Backcountry campsites were studied in three desert vegetation types (pinyon-juniper, catclaw, and desert scrub) in Grand Canyon National Park, Arizona. Relationships between amount of use and amount of impact were examined within each vegetation type. The area disturbed was small, but impacts were generally severe. Important impacts were increased soil compaction and associated decreases in infiltration rates and soil moisture content; these were substantially more pronounced on high than low use sites. The only impact parameter that differed significantly between vegetation types was core area. The types of impact identified are similar to those found in the coniferous forests studied elsewhere, as is the logarithmic relationship between amount of use and amount of impact. However, Grand Canyon sites can support more visitor use before reaching near-maximum levels of impact for important impact parameters.     

RESULTS OF ACIDIZING WATER WELLS IN ARIZONA1

Two wellfields have been developed to provide water for a coal fired electric generating station in Arizona. Wellfield No. 1 penetrates the unconfined Coconino Sandstone aquifer, and wellfield No. 2 penetrates the composite Kaibab Limestone-Coconino Sandstone aquifer where ground water occurs under confined conditions. A well in each wellfield was pumped and water level drawdown data were collected before and after acidizing. The drawdown data at the various pumping rates were analyzed to determine the potential benefits of acidizing production water wells in both wellfields. After acidizing, the specific capacity of the well in wellfield No. 1 was improved about 50 percent at water production rates ranging from about 200 to 500 gallons per minute (gpm) (13 to 32 liters per second (lps)). After acidizing, the specific capacity of the well completed in wellfield No. 2 was improved about 100 percent at pumping rates ranging from about 1,250 to 2,200 gpm (79 to 139 lps). An annual saving of approximately 11 percent in pumping costs can be realized in wellfield No. 2, and savings are approximately four percent in wellfield No. 1. Acidization is beneficial for wells that can produce more than 500 gpm (32 lps), and is of marginal value for those that produce less than that amount.     

Comparison of EDTA-enhanced phytoextraction and phytostabilisation strategies with Lolium perenne on a heavy metal contaminated soil

Phytoremediation is a promising and cost-effective strategy to manage heavy metal polluted sites. In this experiment, we compared simultaneously phytoextraction and phytostabilisation techniques on a Cd and Zn contaminated soil, through monitoring of plant accumulation and leaching. Lolium perenne plants were cultivated for 2 months under controlled environmental conditions in a 27.6 dm³-pot experiment allowing the collect of leachates. The heavy metal phytoextraction was promoted by adding Na-EDTA (0.5 g kg⁻¹ of soil) in watering solution. Phytostabilisation was assessed by mixing soil with steel shots (1%) before L. perenne sowing. Presence of plants exacerbated heavy metal leaching, by improving soil hydraulic conductivity. Use of EDTA for phytoextraction led to higher concentration of heavy metal in shoots. However, this higher heavy metal extraction was insufficient to satisfactory reduce the heavy metal content in soil, and led to important heavy metal leaching induced by EDTA. On the other hand, addition of steel shots efficiently decreased both Cd and Zn mobility, according to 0.01 M CaCl₂ extraction, and leaching. However, improvement of growth conditions by steel shots led to higher heavy metal mass in shoot tissues. Therefore, soil heavy metal mobility and plant metal uptake are not systematically positively correlated.     

Use of ATP Readings to Predict a Successful Hygiene Intervention in the Workplace to Reduce the Spread of Viruses on Fomites

The purpose of this study was to validate the use of adenosine triphosphate (ATP) for evaluating hygiene intervention effectiveness in reducing viral dissemination in an office environment. The bacterial virus MS-2 was used to evaluate two scenarios, one where the hand of an individual was contaminated and another where a fomite was contaminated. MS-2 was selected as a model because its shape and size are similar to many human pathogenic viruses. Two separate experiments were conducted, one in which the entrance door push plate was inoculated and the other in which the hand of one selected employee was inoculated. In both scenarios, 54 selected surfaces in the office were tested to assess the dissemination of the virus within the office. Associated surface contamination was also measured employing an ATP meter. More than half of the tested hands and surfaces in the office were contaminated with MS-2 within 4 h. Next, an intervention was conducted, and each scenario was repeated. Half of the participating employees were provided hand sanitizer, facial tissues, and disinfecting wipes, and were instructed in their use. A significant (p < 0.05) reduction was observed in the number of surfaces contaminated with virus. This reduction in viral spread was evident from the results of both viral culture and the surface ATP measurements, although there was no direct correlation between ATP measurements with respect to viral concentration. Although ATP does not measure viruses, these results demonstrate that ATP measurements could be useful for evaluating the effectiveness of hygiene interventions aimed at preventing viral spread in the workplace.     

Prioritisation of citizen‐centric information for disaster response

In the aftermath of a disaster event, and in the absence of trained professionals, many responsibilities are assumed by uninjured citizens who are willing and able to help, such as care of the injured or search and rescue. These citizens are constrained by communications and logistics problems but are less equipped to deal with them as most often they are cut off from any coordinated assistance. The method proposed in this study would increase the survivability of those injured or trapped by a disaster event by providing a facility to allow citizens to coordinate and share information among themselves. This is facilitated by the proposed deployment and the autonomous management of an ad hoc infrastructure that liaises directly with survivors without central control. Furthermore, as energy concerns present critical constraints to these networks, this research proposes a system of categorising information elements within the network to ensure efficient information exchange.     

Assessment of global industrial-age anthropogenic arsenic contamination

Arsenic, a carcinogenic trace element, threatens not only the health of millions of humans and other living organisms, but also global sustainability. We present here, for the first time, the global industrial-age cumulative anthropogenic arsenic production and its potential accumulation and risks in the environment. In 2000, the world cumulative industrial-age anthropogenic arsenic production was 4.53 million tonnes. The world-wide coal and petroleum industries accounted for 46% of global annual gross arsenic production, and their overall contribution to industrial-age gross arsenic production was 27% in 2000. Global industrial-age anthropogenic As sources (as As cumulative production) follow the order: As mining production >As generated from coal >As generated from petroleum. The potential industrial-age anthropogenic arsenic input in world arable surface in 2000 was 2.18 mg arsenic kg^–1, which is 1.2 times that in the lithosphere. The development of substitute materials for arsenic applications in the agricultural and forestry industries and controls of arsenic emissions from the coal industry may be possible strategies to significantly decrease arsenic pollution sources and dissipation rates into the environment.     

STREAM RESTORATION IN THE VICINITY OF BRIDGES1

ABSTRACT: The number of stream restoration and enhancement projects being implemented is rapidly increasing. At road crossings, a transition must be created from the restored channel through the bridge or culvert opening. Given conflicting design objectives for a naturalized channel and a bridge opening, guidance is needed in the design of the transition. In this paper we describe the use of vanes, cross vanes, and w‐weirs, commonly used in stream restoration and enhancement projects, that may provide an adequate transition at bridges. Laboratory experiments were conducted on vanes and cross vanes to provide a transition for single span bridge abutments and on w‐weirs to provide a transition for double span bridges which have a pier in mid‐channel. The results of the experiments provided design criteria for transitions using each of the three structures. Prior field experience provided guidance on appropriate applications in terms of the stream and bridge characteristics.     

The acetochlor registration partnership surface water monitoring program for four corn herbicides

A surface drinking water monitoring program for four corn (Zea mays L.) herbicides was conducted during 1995-2001. Stratified random sampling was used to select 175 community water systems (CWSs) within a 12-state area, with an emphasis on the most vulnerable sites, based on corn intensity and watershed size. Finished drinking water was monitored at all sites, and raw water was monitored at many sites using activated carbon, which was shown capable of removing herbicides and their degradates from drinking water. Samples were collected biweekly from mid-March through the end of August, and twice during the off-season. The analytical method had a detection limit of 0.05 microg L(-1) for alachlor [2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl)-acetamide] and 0.03 microg L(-1) for acetochlor [2-chloro-N-(ethoxymethyl)-N-(2-ethyl-6-methylphenyl)-acetamide], atrazine [6-chloro-N-ethyl-N'-(1-methylethyl)-1,3,5-triazine-2,4-diamine], and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)-acetamide]. Of the 16528 drinking water samples analyzed, acetochlor, alachlor, atrazine, and metolachlor were detected in 19, 7, 87, and 53% of the samples, respectively. During 1999-2001, samples were also analyzed for the presence of six major degradates of the chloroacetanilide herbicides, which were detected more frequently than their parent compounds, despite having higher detection limits of 0.1 to 0.2 microg L(-1). Overall detection frequencies were correlated with product use and environmental fate characteristics. Reservoirs were particularly vulnerable to atrazine, which exceeded its 3 microg L(-1) maximum contaminant level at 25 such sites during 1995-1999. Acetochlor annualized mean concentrations (AMCs) did not exceed its mitigation trigger (2 microg L(-1)) at any site, and comparisons of observed levels with standard measures of human and ecological hazards indicate that it poses no significant risk to human health or the environment.     

Characterisation of particulate exposure during fireworks displays

Little is known about the level and content of exposure to fine particles (PM_2.5) among persons who attend fireworks displays and those who live nearby. An evaluation of the levels of PM_2.5 and their elemental content was carried out during the nine launches of the 2007 Montréal International Fireworks Competition. For each event, a prediction of the location of the firework plume was obtained from the Canadian Meteorological Centre (CMC) of the Meteorological Service of Canada. PM_2.5 was measured continuously with a photometer (Sidepak?, TSI) within the predicted plume location (“predicted sites”), and integrated samples were collected using portable personal samplers. An additional sampler was located on a nearby roof (“fixed site”). The elemental composition of the collected PM_2.5 samples from the “predicted sites” was determined using both a non-destructive energy dispersive ED-XRF method and an ICP-MS method with a near-total microwave-assisted acid digestion. The elemental composition of the “fixed site” samples was determined by the ICP-MS with the near-total digestion method. The highest PM_2.5 levels reached nearly 10 000 μg m^?3, roughly 1000 times background levels. Elements such as K, Cl, Al, Mg and Ti were markedly higher in plume-exposed filters. This study shows that 1) persons in the plume and in close proximity to the launch site may be exposed to extremely high levels of PM_2.5 for the duration of the display and, 2) that the plume contains specific elements for which little is known of their acute cardio-respiratory toxicity.     

Cadmium uptake by the water hyacinth: Effects of root mass,solution volume,complexers and other metal ions1

At a fixed Cd²⁺ concentration water hyacinth ($\text{Eichhornia crassipes}$) plants with greater root mass (dry weight) take up more metal ions as a function of time, and more metal ions are taken up by a plant as the solution volume is increased. Experiments in which several different metal ion complexers were present suggest that (1) the roots possess sites which initially reversibly bind free Cd²⁺, (2) some added complexers can compete with these root sites for free Cd²⁺, and (3) with time Cd²⁺ bound to the roots is translocated into into the root tissues effectively removing it from the equilibrium processes in solution. Many metal ions are taken up by the plant but only the micronutrient Zn²⁺ competes well with Cd²⁺ for uptake. Thus, there may be binding sites on the roots for specific metal ions.