Experimental Verification of Diffusion Battery Theory

The diffusion battery, an assembly of circular tubes or rectangular channels, is one of the best devices available for measuring the size and size distribution of submicron aerosols in the diameter range 0.002 to 0.2 µ m. The performance of these batteries is known from molecular diffusion theory, but until now has not been checked experimentally in this size range because of the lack of the necessary monodisperse aerosols. Experimental measurements on singly charged monodisperse aerosols from 0.01 µm to 0.1 µ m are described using a General Electric and a Pollak condensation nucleus counter to measure the aerosol penetration through the stages of a set of portable diffusion batteries in series. Particle sizes in the range tested could be selected at will by adjusting the voltage of an electric mobility classifier. The fraction of aerosol of a given size passing through each battery stage was found to agree closely with the penetration calculated from molecular diffusion theory for that size. This shows that the theory is correct and confirms that the aerosol produced by the electric mobility classifier was monodisperse. In addition, it was found that the difference in penetration between a charged versus a neutralized aerosol was insignificant except for the smallest aerosols used.     

Characterizing the Occurrence,Sources, and Variability of Radon in Pacific Northwest Homes

A compilation of data from earlier studies of 172 homes in the Pacific Northwest indicated that approximately 65 percent of the 46 homes tested in the Spokane River Valley/Rathdrum Prairie region of eastern Washington/northern Idaho had heating season indoor radon (²²²Rn) concentrations above the U. S. EPA guideline of 148 Bq m^?3 (4 pCi L^?1). A subset of 35 homes was selected for additional study. The primary source of indoor radon in the Spokane River Valley/Rathdrum Prairie was pressure-driven flow of soil gas containing moderate radon concentrations (geometric mean concentration of 16,000 Bq m^?3) from the highly permeable soils (geometric mean permeability of 5 × 10^?11 m²) surrounding the house substructures. Estimated soil gas entry rates ranged from 0.4 to 39 m³h^?1 and 1 percent to 21 percent of total building air infiltration. Radon from other sources, including domestic water supplies and building materials was negligible. In high radon homes, winter indoor levels averaged 13 times higher than summer concentrations, while in low radon homes winter levels averaged only 2.5 times higher. Short-term variations in indoor radon were observed to be dependent upon indoor-outdoor temperature differences, wind speed, and operation of forced-air furnace fans. Forced-air furnace operation, along with leaky return ducts and plenums, and openings between the substructure and upper floors enhanced mixing of radon-laden substructure air throughout the rest of the building.     

EPA’s Clean Air Act Operating Permit Rules

Title V of the Clean Air Act requires tens of thousands of air pollution sources to obtain an operating permit incorporating all applicable requirements under the Act. EPA recently promulgated its controversial Title V regulations, which establish the minimum elements for state permit programs.

The new permit system is among the most important changes made by the 1990 Clean Air Act Amendments, and will significantly alter the way companies comply with air pollution requirements. Previously, the Act only required certain sources to obtain a new source review permit before constructing or modifying the facility (although many states established operating permit systems on their own). Now, all states must adopt operating permit programs consistent with the minimum federal requirements, and submit them to EPA by November 1993. Even though EPA has established minimum requirements, these programs are likely to vary widely from state to state.     

Surface geophysical exploration: developing noninvasive tools to monitor past leaks around Hanford’s tank farms

A characterization program has been developed at Hanford to image past leaks in and around the underground storage tank facilities. The program is based on electrical resistivity, a geophysical technique that maps the distribution of electrical properties of the subsurface. The method was shown to be immediately successful in open areas devoid of underground metallic infrastructure, due to the large contrast in material properties between the highly saline waste and the dry sandy host environment. The results in these areas, confirmed by a limited number of boreholes, demonstrate a tendency for the lateral extent of the underground waste plume to remain within the approximate footprint of the disposal facility. In infrastructure-rich areas, such as tank farms, the conventional application of electrical resistivity using small point-source surface electrodes initially presented a challenge for the resistivity method. The method was then adapted to directly use the buried infrastructure, specifically the steel-cased wells that surround the tanks, as “long” electrodes for both transmission of electrical current and measurements of voltage. Overcoming the drawbacks of the long electrode method has been the focus of our work over the past 7 years. The drawbacks include low vertical resolution and limited lateral coverage. The lateral coverage issue has been improved by supplementing the long electrodes with surface electrodes in areas devoid of infrastructure. The vertical resolution has been increased by developing borehole electrode arrays that can fit within the small-diameter drive casing of a direct push rig. The evolution of the program has led to some exceptional advances in the application of geophysical methods, including logistical deployment of the technology in hazardous areas, development of parallel processing resistivity inversion algorithms, and adapting the processing tools to accommodate electrodes of all shapes and locations. The program is accompanied by a full set of quality assurance procedures that cover the layout of sensors, measurement strategies, and software enhancements while insuring the integrity of stored data. The data have been shown to be useful in identifying previously unknown contaminant sources and defining the footprint of precipitation recharge barriers to retard the movement of existing contamination.     

Transmission distance of chemical cues from coral habitats: implications for marine larval settlement in context of reef degradation

The present study (Ishigaki Island, Japan) explored the distance of transmission of chemical cues emitted by live versus dead coral reefs (Exp. 1: High performance liquid chromatography (HPLC) analyses with water sampling station at 0, 1, and 2 km away from the reef) and the potential attraction of these chemical cues by larval fish, crustaceans, and cephalopods (Exp. 2: choice flume experiment conducted on 54 Chromis viridis larvae, 52 Palaemonidae sp larvae, and 16 Sepia latimanus larvae). In the experiment 1, HPLC analyses highlighted that the live coral reef (and not the dead coral reef) produced different and distinct molecules, and some of these molecules could be transported to a distance of at least 2 km from the reef with a reduction of concentration by 14–17-fold. In the experiment 2, C. viridis, Palaemonidae sp, and S. latimanus larvae were significantly attracted by chemical cues from a live coral reef (sampling station: 0 km), but not from a dead coral reef. However, only C. viridis larvae detected the chemical cues until 1 km away from the live coral reef. Overall, our study showed that chemical cues emitted by a live coral reef were transported farthest away in the ocean (at least 2 km) compared to those from a dead coral reef and that fish larvae could detect these cues until 1 km. These results support the assumption of a larval settlement ineffective in degraded coral reefs, which will assist conservationists and reef managers concerned with maintaining biodiversity on reefs that are becoming increasingly degraded.     

Deconstructing an assemblage of “turtle” barnacles: species assignments and fickle fidelity in Chelonibia

Barnacles in the genus Chelonibia are commensal with a variety of motile marine animals including sea turtles, crustaceans, and sirenians. We conducted a worldwide molecular phylogenetic survey of Chelonibia collected from nearly all known hosts to assess species relationships, host-fidelity, and phylogeographic structure. Using DNA sequences from a protein-coding mitochondrial gene (COI), a mitochondrial rRNA gene (12S), and one nuclear rRNA gene (28S), we found that of four species, three (C. testudinaria, C. patula, and C. manati) are genetically indistinguishable. In addition, we show each utilizes a rare androdioecious mode of reproduction involving complemental males. In contrast, the fourth species (C. caretta), which is hermaphroditic and specializes on turtles, is genetically distinct—leading to the conclusion that the three former taxa are morphotypes of the same species and should be synonymized under C. testudinaria. Phylogenetic analysis resulted in three geographic clades (Atlantic, Indian Ocean/western Pacific, and eastern Pacific) with haplotype parsimony networks revealing no shared haplotypes among geographic regions. Analysis of molecular variance detected significant differences among sequences by region (p < 0.005); conversely, there were no significant differences among sequences when grouped by host or taxonomic designation. Average pairwise genetic distances were lower between the eastern Pacific and Atlantic clades (0.053 ± 0.006) than between the eastern Pacific and Indian Ocean/western Pacific clades (0.073 ± 0.008), suggesting Atlantic and eastern Pacific populations were connected more recently, perhaps until the rise of the Isthmus of Panama. Host use by Chelonibia morphotypes is discussed along with speculation on possible ancestral hosts and support for a “turtle-first” hypothesis.     

Individual trophic specialisation and niche segregation explain the contrasting population trends of two sympatric otariids

Individual specialisation is increasingly recognised to be an ecological and evolutionary process having important consequences for population dynamics of vertebrates. The South American fur seal (SAFS) and the South American sea lion (SASL) are two otariid species with similar ecology that coexist in sympatry in the Uruguayan coast. These two species have contrasting trends and widely different population sizes. The underlying reasons for these population trends, unique in their geographical ranges, remain unknown. We studied the foraging ecology of these otariid species over 2 years at the individual- and population levels using the isotopic ratios (δ¹³C–δ¹⁵N) in whiskers of both sexes. We compared the isotope ratios between species and sexes and used several metrics to characterise the degree of overlap and distinctiveness in the use of isotopic niche space at the individual- and population levels. Interspecific trophic niche overlap was minimal, thus ruling out interspecific competition as the cause for the contrasting population trends of both species. At the intraspecific level, both species had sexual segregation in their foraging areas, but each species had a large overlap in the isotopic niches between sexes. While SAFS had a wider niche and generalist individuals, SASL had the narrower niche with a higher degree of individual specialisation. Behavioural constraints during the breeding season, intraspecific competition and a major dependence on resources of the Uruguayan coastal shelf may explain why SASL had a higher trophic individual specialisation and a larger vulnerability in a heavily exploited habitat by fisheries and, by consequence, a locally declining population trend.