Environmental risk assessment of cobalt and manganese from industrial sources in an estuarine system

A total of 74 samples of soil, sediment, industrial sludge, and surface water were collected in a Mediterranean estuarine system in order to assess the potential ecological impact of elevated concentrations of Co and Mn associated with a Terephthalic (PTA) and Isophthalic (PIPA) acids production plant. Samples were analyzed for elemental composition (37 elements), pH, redox potential, organic carbon, and CaCO₃ content, and a group of 16 selected samples were additionally subjected to a Tessier sequential extraction. Co and Mn soil concentrations were significantly higher inside the industrial facility and around its perimeter than in background samples, and maximum dissolved Co and Mn concentrations were found in a creek near the plant’s discharge point, reaching values 17,700 and 156 times higher than their respective background concentrations. The ecological risk was evaluated as a function of Co and Mn fractionation and bioavailability which were controlled by the environmental conditions generated by the advance of seawater into the estuarine system during high tide. Co appeared to precipitate near the river mouth due to the pH increase produced by the influence of seawater intrusion, reaching hazardous concentrations in sediments. In terms of their bioavailability and the corresponding risk assessment code, both Co and Mn present sediment concentrations that result in medium to high ecological risk whereas water concentrations of both elements reach values that more than double their corresponding Secondary Acute Values.     

Technical, economic and environmental analysis of a MSW kerbside separate collection system applied to small communities

The main aim of this study was to evaluate the costs and environmental impacts induced by a fixed model of MSW kerbside separate collection system for communities up to 10,000 inhabitants, in order to evaluate the convenience for the smaller municipalities to unite and form more economically and environmentally sound systems. This topic is important not only due to the large number of small municipalities (e.g. in Italy 72% of the municipalities has less than 5000 inhabitants) but also to the fact that separate collection systems are typically designed to take into account only the technical and economic aspects, which is a practice but not acceptable in the light of the sustainable development paradigm. In economic terms, between 1000 and 4000 inhabitants, the annual per capita cost for vehicles and personnel decreased, with a maximum at approximately 180€/inhabitants/year; while, from 5000 up to 10,000 inhabitants, the annual per capita cost was practically constant and equal to about 80€/inhabitants/year. For the municipalities of less than 5000 inhabitants, from an economic point of view the aggregation is always advantageous. The environmental impacts were calculated by means of the Life Cycle Assessment tool SimaPro 7.1, while the economic-environmental convenience was evaluated by combining in a simple multicriteria analysis, the annual total per capita cost (€/inhabitants/year) and the annual total per capita environmental impact (kEco-indicator point/inhabitants/year), giving the same importance to each criteria. The analysis was performed by means of the Paired Comparison Technique using the Simple Additive Weighting method. The economic and environmental convenience of the aggregation diminishes with the size of the municipalities: for less than 4000 inhabitants, the aggregation was almost always advantageous (91.7%); while, for more than or equal to 5000 inhabitants, the aggregation was convenient only in 33.3% of the cases. On the whole, out of 45 cases examined, for the municipalities from 1000 to 9000 inhabitants, the aggregation was both economically and environmentally convenient in 60.0% of the cases.     

Large-scale diversity and biogeography of benthic copepods in European waters

A large-scale database concerning benthic copepods from the Arctic, Baltic Sea, North Sea, British Isles, Adriatic Sea and Crete was compiled to assess species richness, biodiversity, communities, ecological range size and biogeographical patterns. The Adriatic showed the highest evenness and the most species-rich communities. Assemblages from the North Sea, British Isles, Baltic and Crete had a lower evenness. The British Isles were characterised by impoverished communities. The ecological specificity of copepod species showed two diverging trends: higher specificity of species in more diverse assemblages was observed in the Adriatic, North Sea and Baltic. A uniformly high species specificity disregarding sample diversity was found on Crete and in the British Isles. Benthic copepod communities showed distinct patterns that clearly fit the predefined geographical regions. Communities were distinguishable and β-diversity was found to be high around Europe, indicating a high species turnover on the scale of this investigation. The British Isles and the North Sea were found to be faunistic links to the Baltic and the Arctic.     

Ecological relevance of performance criteria for species distribution models

Species distribution models have often been developed based on ecological data. To develop reliable data-driven models, however, a sound model training and evaluation procedures are needed. A crucial step in these procedures is the assessment of the model performance, with as key component the applied performance criterion. Therefore, we reviewed seven performance criteria commonly applied in presence-absence modelling (the correctly classified instances, Kappa, sensitivity, specificity, the normalised mutual information statistic, the true skill statistic and the odds ratio) and analysed their application in both the model training and evaluation process. Although estimates of predictive performance have been used widely to assess final model quality, a systematic overview was missing because most analyses of performance criteria have been empirical and only focused on specific aspects of the performance criteria. This paper provides such an overview showing that different performance criteria evaluate a model differently and that this difference may be explained by the dependency of these criteria on the prevalence of the validation set. We showed theoretically that these prevalence effects only occur if the data are inseparable by an n-dimensional hyperplane, n being the number of input variables. Given this inseparability, different performance criteria focus on different aspects of model performance during model training, such as sensitivity, specificity or predictive accuracy. These findings have important consequences for ecological modelling because ecological data are mostly inseparable due to data noise and the complexity of the studied system. Consequently, it should be very clear which aspect of the model performance is evaluated, and models should be evaluated consistently, that is, independent of, or taking into account, species prevalence. The practical implications of these findings are clear. They provide further insight into the evaluation of ecological presence/absence models and attempt to assist modellers in their choice of suitable performance criteria.     

An analysis of the problems of developing environmental education in Brazilian Federal protected areas

This paper describes the problems encountered in developing environmental education in Federal protected areas in Brazil. Results of a survey on the current status of environmental education in four categories of Federal protected areas; namely national parks, biological reserves, ecological stations and environmental protection areas, are described and discussed. The study suggests that the development of environmental education in protected areas in the country has several limitations: financial resources, lack of training, material resources and a lack of policy on environmental education. It also identifies that some of these problems seem to be inter-related with those of the National System of Conservation Units of the country which may result in a retarding of the development of environmental education in such areas.     

Shift to continuous operation of an air-cathode microbial fuel cell long-running in fed-batch mode boosts power generation

Microbial fuel cells (MFCs) which are operated in continuous mode are more suitable for practical applications than fed batch ones. The aim of the present study was to characterize an air-cathode MFC operating in continuous mode and to determine the intrinsic properties for suitable performance and scalability. Air-cathode MFCs were constructed from plexiglass with a total working volume of 220 mL. Zirfon® separator used in this MFC had cross section area of 100 cm². The air cathode MFCs were operated in fed-batch mode and then shifted to the continuous mode. To determine the behavior of anode and cathode in long term operation (274 days), their contribution in MFC performance was evaluated over time. Once the active biofilm was formed, power production and substrate consumption rate were significantly higher. The internal resistance increased with the passage of time. After stabilization of biofilm when the MFC was placed in close circuit by connecting an external resistance, the anode-reference and cathode-reference electrode behavior showed that anode potential is near to the bacterial cell inside potential. The maximum open circuit voltage achieved was 623 mV and the highest power and volumetric power density were 38.03 mW/m² and 1296 mW/m³, respectively.     

Recent evolution of the physical–chemical characteristics of a Site of National Interest—the Mar Piccolo of Taranto (Ionian Sea)—and changes over the last 20 years

The Mar Piccolo of Taranto, classified as a ‘Site of National Interest’ (SIN), is a semi-enclosed basin divided into two inlets with lagoon features and sea influences, seriously affected by anthropic activities. In the framework of the RITMARE project, a study has been carried out to evaluate the functionality of this ecosystem. As part of this work, measurements of the water abiotic parameters were performed in order to assess the physical–chemical features of this area after the activation, in the last decade, of treatment plants for various urban and industrial dumping. Seawater intrusions and continental inputs, as well as several submarine freshwater springs, clearly affect physical–chemical characteristics of the water column in the two inlets. This finding suggests that small-scale patterns in water circulation have the potential to influence the chemical properties of the seawater. The comparison with a 20-year dataset reveals a drastic decrease in nutrient concentrations after the year 2000, validating the functionality of the treatment plants. The reduction of nutrient inputs into the basin (up to ?90 % in the first inlet characterized by lower hydraulic residence time) has changed the biogeochemical characteristics of the Mar Piccolo from being relatively eutrophic to moderately oligotrophic.     

Physical Characterization of Biodegradable Films Based on Chitosan,Polyvinyl Alcohol and <Emphasis Type="Italic">Opuntia</Emphasis> Mucilage

This study aimed to develop and characterize biodegradable films containing mucilage, chitosan and polyvinyl alcohol (PVA) in different concentrations. The films were prepared by casting on glass plates using glycerol as plasticizer. Mechanical properties, water vapor and oxygen barrier, as well as the interaction with water, were measured. The compatibility of the film-forming components and the uniformity of the films were determined by zeta potential and SEM, respectively. The glycerol and mucilage allowed obtaining more hydrophilic films. The barrier properties of the films made from 100 % chitosan were similar to composed films containing PVA up to 40 %. The results of this study suggest that the interaction between chitosan and mucilage could increase water vapor permeability. The films prepared from either 100 % chitosan or PVA showed a more hydrophobic behavior as compared to the composed films. The films were homogenous since no boundary or separation of components was observed, indicating a good compatibility of the components in the films.     

Distal impacts of aquarium trade: Exploring the emerging sandhopper (<Emphasis Type="Italic">Orchestoidea tuberculata</Emphasis>) artisanal shore gathering fishery in Chile

Artisanal fishery activities support the livelihoods of millions of people worldwide, particularly in developing countries. Within these fisheries, distal global drivers can promote switching between alternative target resources. These drivers can promote the rapid development of new, unregulated and previously unexploited fisheries that pose a threat to the sustainability of ecosystems. In this paper, we describe a new artisanal shore gathering activity that targets a previously unexploited resource: the sandhopper (Orchestoidea tuberculata). The activity is driven by aquarium trade demand for food. We used mixed methods to describe the activity, assessed basic socio-economic incentives, and estimated Catches per Unit Effort. Results show that the sandhopper plays an important role for the livelihoods of shore gatherers engaged in the activity. Gatherers have adapted and developed two main extraction methods with different degrees of investment and extraction rates. Furthermore, gatherers have developed local knowledge regarding the ecology and management of the resource. Results show that economic incentives can motivate a rapid expansion of this unregulated activity. Future research gaps and management options to address the development of this fishery are discussed in light of these findings.     

远海条件下装设备的环境适应性要求分析

梳理了主要环境因素及其综合作用对远海条件下装设备质量的影响,总结了远海环境下装设备使用过程中存在的一些主要问题,并对装设备对远海环境适应性的特殊要求进行了分析。