Mapping soil textural fractions across a large watershed in north-east Florida

Assessment of regional scale soil spatial variation and mapping their distribution is constrained by sparse data which are collected using field surveys that are labor intensive and cost prohibitive. We explored geostatistical (ordinary kriging-OK), regression (Regression Tree-RT), and hybrid methods (RT plus residual Sequential Gaussian Simulation-SGS) to map soil textural fractions across the Santa Fe River Watershed (3585 km²) in north-east Florida. Soil samples collected from four depths (L1: 0–30 cm, L2: 30–60 cm, L3: 60–120 cm, and L4: 120–180 cm) at 141 locations were analyzed for soil textural fractions (sand, silt and clay contents), and combined with textural data (15 profiles) assembled under the Florida Soil Characterization program. Textural fractions in L1 and L2 were autocorrelated, and spatially mapped across the watershed. OK performance was poor, which may be attributed to the sparse sampling. RT model structure varied among textural fractions, and the model explained variations ranged from 25% for L1 silt to 61% for L2 clay content. Regression residuals were simulated using SGS, and the average of simulated residuals were used to approximate regression residual distribution map, which were added to regression trend maps. Independent validation of the prediction maps showed that regression models performed slightly better than OK, and regression combined with average of simulated regression residuals improved predictions beyond the regression model. Sand content >90% in both 0–30 and 30–60 cm covered 80.6% of the watershed area.     

A model for assessing habitat fragmentation caused by new infrastructures in extensive territories – Evaluation of the impact of the Spanish strategic infrastructure and transport plan

The aim of the present work is to design a model for evaluating the impact of planned infrastructures on species survival at the territorial scale by calculating a connectivity index. The method developed involves determining the effective distance of displacement between patches of the same habitat, simplifying earlier models so that there is no dependence on specific variables for each species. A case study is presented in which the model was used to assess the impact of the forthcoming roads and railways included in the Spanish Strategic Infrastructure and Transport Plan (PEIT, in its Spanish initials).This study took into account the habitats of peninsular Spain, which occupies an area of some 500,000 km². In this territory, the areas deemed to provide natural habitats are defined by Directive 92/43/EEC. The impact of new infrastructures on connectivity was assessed by comparing two scenarios, with and without the plan, for the major new road and railway networks. The calculation of the connectivity index (CI) requires the use of a raster methodology based on the Arc/Info geographical information system (GIS). The actual calculation was performed using a program written in Arc/Info Macro Language (AML); this program is available in FragtULs (Mancebo Quintana, 2007), a set of tools for calculating indicators of fragmentation caused by transport infrastructure (http://topografia.montes.upm.es/fragtuls.html).The indicator of connectivity proposed allows the estimation of the connectivity between all the patches of a territory, with no artificial (non-ecologically based) boundaries imposed. The model proposed appears to be a useful tool for the analysis of fragmentation caused by plans for large territories.     

Investigation of potentially toxic heavy metals in different organic wastes used to fertilize market garden crops

The benefits of using organic waste as fertilizer and soil amendment should be assessed together with the environmental impacts due to the possible presence of heavy metals (HMs). This study involved analysing major element and HM contents in raw and size-fractionated organic wastes (17 sewage sludges and composts) from developed and developing countries. The overall HM concentration pattern showed an asymmetric distribution due to the presence of some wastes with extremely high concentrations. HM concentrations were correlated with the size of cities or farms where the wastes had been produced, and HM were differentiated with respect to their origins (geogenic: Cr–Ni; anthropogenic agricultural and urban: Cu–Zn; anthropogenic urban: Cd–Pb). Size fractionation highlighted Cd, Cu, Zn and Pb accumulation in fine size fractions, while Cr and Ni were accumulated in the coarsest. HM associations with major elements revealed inorganic (Al, Fe, etc.) bearing phases for Cr and Ni, and sulfur or phosphorus species for Cd, Cu Pb and Zn.     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

A method for the assessment of light-induced oxidative stress in embryos of fucoid algae via confocal laserscan microscopy

A method was developed for measurement of active oxygen production in embryonic stages of the brown seaweed Fucus spiralis, using the label CM-DCFH-DA. Active oxygen species convert the label into the green fluorescent CM-DCF (exc/em 488/530 nm) that is detected via confocal laserscan microscopy and quantitative image analysis. Loading of the label did not harm the embryos; loading efficiency was age-independent, and the esterases needed for conversion to CM-DCFH were not inhibited by the effective UV dose (2 W m⁻²) applied in the experiments. After correction for daily variation of the laser power, and calibration with DCF standard solutions, this automated analysis of confocal images rendered active oxygen concentrations in fucoid embryos (μM DCF). An experiment was designed for the assessment of active oxygen production following irradiance stress in the light-sensitive embryos. Dim-light-acclimated, 1-, 2- and 4-day-old embryos were transferred for 60 min to defined high-light conditions (4π-irradiance 300 μmol photons m⁻² s⁻¹), optionally without UV radiation, including UVA, or including UVA plus UVB. PSII yield measurements (PAM fluorometer) were carried out in order to assess the degree of photoinhibition under these light conditions. The imposed light stress initially caused a rapid decrease of the PSII yields (Φ_P). With increasing embryo age, minimum Φ_P values attained under light stress remained higher. Consequently, electron transport rates (ETR) would increase with embryo age, i.e., with the development of their photosynthetic apparatus. Active oxygen production increased with ETR, and when UVB was included, relatively greater amounts of active oxygen were produced. A slow, second-phase decrease of Φ_P under light stress that was proportional to active oxygen production indicated that some photooxidative damage was caused, in particular during UVB exposure. Recovery from light stress was a rapid process in the absence of UVB; in such cases Φ_P was almost restored to the initial values within 60 min. The relative state of recovery of Φ_P was correlated with both the effective UV dose and active oxygen production rate (DCF). Recovery was slowest in embryos exposed for 60 min to an experimental UVB dose, which was representative of a situation at low tide, on a sunny day. The results suggest that active oxygen may cause an in situ inhibition of growth of the earliest life stages of F. spiralis. Received: 26 January 2000 / Accepted: 4 September 2000     

Trace-metal detoxification in the ventral caeca of Orchestia gammarellus (Crustacea: Amphipoda)

The talitrid amphipod crustacean Orchestia gammarellus (Pallas) was collected from metal-contaminated (Dulas Bay, Gironde) and control (Millport) sites in the UK and France. Irrespective of site of origin, the amphipods showed the same physiological mechanism of trace-metal detoxification, involving the ventral caeca. Copper was always present in lysosomal residual bodies in the ventral caeca. Following laboratory exposure to zinc and cadmium, the lysosomes usually contained both copper and zinc but cadmium was not detectable. The lysosomal copper concentration is positively correlated to that of sulphur, while the concentration of lysosomal zinc is related to that of phosphorus. Results are interpreted in terms of the differential rates of turnover of metallothioneins chelating copper, zinc or cadmium. Received: 9 February 1999 / Accepted: 2 December 1999     

Genetic structure of fissiparous populations of Holothuria (Halodeima) atra on the Great Barrier Reef

Allozyme variation at five polymorphic loci was surveyed in a total of 311 individuals of the sea cucumber Holothuria (Halodeima) atra (Jäger, 1833) collected from two nearshore and two midshelf populations in the Great Barrier Reef in November 1996. Strong deviations in genotype frequencies from those expected under Hardy–Weinberg equilibrium, particularly a large number of heterozygote excesses, confirmed the occurrence of asexual reproduction. Females and males differed significantly in genotype frequencies as a result of differences in either the amount of fission in each sex or in the mortality of asexually produced recruits. The estimated maximum sexual input (number of sexually produced individuals: sample size = N*:N_i) to the two nearshore reefs (38 to 67%) was low relative to that to the two midshelf reefs (74 to 87%). The three ratios and G _o :G _e , N _go :N _i , N*:N _i , (where G _o = observed genotypic diversity, G _e = expected genotypic diversity, N _go = number of genotypes) considered to be indicators of the extent of asexual reproduction, showed a consistent trend in the degree of asexual reproduction similar to that derived from the number of regenerating individuals observed in the populations for which data were available. F-statistic analyses of clonal gene frequencies demonstrated that all populations received sexual recruits from the same gene pool. There was evidence of restricted sexual recruitment to the Fantome population, suggesting that asexual reproduction was dominant only in areas where sexual recruitment was limited by other factors.