An evaluation of indoor and outdoor biological particulate matter

The incidences of allergies, allergic diseases and asthma are increasing world wide. Global climate change is likely to impact plants and animals, as well as microorganisms. The World Health Organization, U.S. Environmental Protection Agency, U.S. Department of Agriculture, U.S. Department of Health and Human Services, and the Intergovernmental Panel on Climate Change cite increased allergic reactions due to climate change as a growing concern. Monitoring of indoor and ambient particulate matter (PM) and the characterization of the content for biological aerosol concentrations has not been extensively performed. Samples from urban and rural North Carolina (NC), and Denver (CO), were collected and analyzed as the goal of this research. A study of PM₁₀ (<10 μm in aerodynamic diameter) and PM_2.5 (<2.5 μm in aerodynamic diameter) fractions of ambient bioaerosols was undertaken for a six month period to evaluate the potential for long-term concentrations. These airborne bioaerosols can induce irritational, allergic, infectious, and chemical responses in exposed individuals. Three separate sites were monitored, samples were collected and analyzed for mass and biological content (endotoxins, (1,3)-β-d-glucan and protein). Concentrations of these bioaerosols were reported as a function of PM size fraction, mass and volume of air sampled. The results indicated that higher concentrations of biologicals were present in PM₁₀ than were present in PM_2.5, except when near-roadway conditions existed. This study provides the characterization of ambient bioaerosol concentrations in a variety of areas and conditions.     

Laboratory and field investigations of particulate and carbon monoxide emissions from traditional and improved cookstoves

We implemented a program in which emission characterization is enabled through collaborations between academic, US and international non-governmental entities that focus on evaluation, dissemination, and in-use testing, of improved cookstoves. This effort resulted in a study of field and laboratory emissions from traditional and improved biofuel cookstoves. We found that field measured particulate emissions of actual cooking average three times those measured during simulated cooking in the laboratory. Emission factors are highly dependent on the care and skill of the operator and the resulting combustion; these do not appear to be accurately reproduced in laboratory settings. The single scattering albedo (SSA) of the emissions was very low in both lab and field measurements, averaging about 0.3 for lab tests and around 0.5 for field tests, indicating that the primary particles are climate warming. Over the course of three summers in Honduras, we measured field emissions from traditional cookstoves, relatively new improved cookstoves, and “broken-in” improved cookstoves. We found that well-designed improved cookstoves can significantly reduce PM and CO emission factors below traditional cookstoves. For improved stoves, the presence of a chimney generally resulted in lower emission factors but left the SSA unaffected. Traditional cookstoves had an average PM emission factor of 8.2 g kg^?1 – significantly larger than previous studies. Particulate emission factors for improved cookstoves without and with chimneys averaged about 6.6 g kg^?1 and 4.5 g kg^?1, respectively. The elemental carbon (EC) fraction of PM varied significantly between individual tests, but averaged about 25% for each of the categories.     

The role of humic non-exchangeable binding in the promotion of metal ion transport in groundwaters in the environment

Metal ions form strong complexes with humic substances. When the metal ion is first complexed by humic material, it is bound in an 'exchangeable' mode. The metal ion in this fraction is strongly bound, however, if the metal-humic complex encounters a stronger binding site on a surface, then the metal ion may dissociate from the humic substance and be immobilised. However, over time, exchangeably-bound metal may transfer to a 'non-exchangeable' mode. Transfer into this mode and dissociation from it are slow, regardless of the strength of the competing sink, and so immobilisation may be hindered. A series of coupled chemical transport calculations has been performed to investigate the likely effects of non-exchangeable binding upon the transport of metal ions in the environment. The calculations show that metal in the non-exchangeable mode will have a significantly higher mobility than that in the exchangeable mode. The critical factor is the ratio of the non-exchangeable first-order dissociation rate constant and the residence time in the groundwater column, metal ion mobility increasing with decreasing rate constant. A second series of calculations has investigated the effect of the sorption to surfaces of humic/metal complexes on the transport of the non-exchangeably bound metal. It was found that such sorption may reduce mobility, depending upon the humic fraction to which the metal ion is bound. For the more weakly sorbing humic fractions, under ambient conditions (humic concentration etc.) the non-exchangeable fraction may still transport significantly. However, for the more strongly sorbed fractions, the non-exchangeable fraction has little effect upon mobility. In addition to direct retardation, sorption also increases the residence time of the non-exchangeable fraction, giving more time for dissociation and immobilisation. The non-exchangeable dissociation reaction, and the sorption reaction have been classified in terms of two Damkohler numbers, which can be used to determine the importance of chemical kinetics during transport calculations. These numbers have been used to develop a set of rules that determine when full chemical kinetic calculations are required for a reliable prediction, and when equilibrium may be assumed, or when the reactions are sufficiently slow that they may be ignored completely.     

西南典型高原山地城市大气黑碳气溶胶污染特征及来源解析

利用大气细颗粒物采样仪器(青岛崂应2050型)和黑碳仪(SootScanTM Model OT21),于2016年5月至2017年4月对贵阳市城区大气黑碳进行了连续采样和监测.结果表明,大气黑炭的浓度为1.17～12.77 μg/m3,平均值为5.19±1.91 μg/m3,季节变化特征呈现为冬季＞秋季＞春季≈夏季.大...     

Safety in fishing — learning from experience

This article critically examines the level of safety in some sections of the UK fishing industry not only by looking at the available statistics but also by examining actual recent case histories.In 1989 the UK Department of Transport established the Marine Accident Investigation Branch (MAIB). Case histories published by MAIB have been taken as the basis for the article in order to illustrate and draw lessons from incidents that occur in fishing.Fishing will always be a high risk profession but there are ways in which risks can be diminished. Many of the problems are due to vessels being built below the 12 m threshold at which the 1975 Safety Rules currently apply. Some of the vessels lack adequate reserve stability to withstand capsize in the dynamic situation and there are deficiences in design and safety equipment. The training programmes introduced by Seafish for Survival, Fire Fighting and First Aid are now mandatory for all new entrants and these have almost certainly resulted in the saving of lives. However, there needs to be a much greater awareness of accident prevention and the article makes a plea for this to be given more attention.Each case study is probably unique or there are some specific circumstances as to why the accident happened. Nevertheless, there are always underlying lessons to be learnt from every incident of this type, even if there is no loss of life or serious injury.     

Treatment of remediation wastes in RCRA corrective action management units

This article explains new EPA regulations that provide for use of corrective action management units (CAMUs) and temporary units (TUs) as cost-effective techniques for remediating hazardous wastes at facilities undergoing RCRA corrective action and at CERCLA remediation sites. The author outlines EPA criteria for approving the use of CAMUs, discusses the benefits and limitations of using them, and recommends possible ways to improve on the CAMU concept.     

Influence of solvent and soil type on the pressurised fluid extraction of PAHs

Pressurised fluid extraction (PFE) of polycyclic aromatic hydrocarbons (PAHs) from a certified reference material (CRM) 524 has been firstly optimised following a central composite design. The instrumental parameters of the PFE (pressure, temperature, extraction time and number of solvent cycles) were studied in order to obtain maximum extraction yields. Neither pressure nor extraction time or temperature seemed to have any significant effect on the extraction yield, therefore one extraction cycle was enough to exhaustively extract all the PAHs from CRM 524. Once the instrumental conditions were established, the extraction yields obtained with eight different solvents or solvent mixtures [acetone, dichloromethane, acetonitrile, acetone-dichloromethane (1 + 1 v/v), acetone-isohexane (1 + 1 v/v), isohexane, methanol and toluene] from the CRM 524 were compared and showed that the best recoveries were obtained with acetone-isohexane (1 + 1 v/v). Finally, the effect of sand, silt, clay and the organic matter content of soil was investigated with respect to recovery of PAHs by PFE with different solvents or solvent mixtures for aged soil samples. In this case, eight soils with different sand, silt, clay and organic matter contents were slurry spiked with PAHs and aged for 19 days. Three aliquots of each slurry spiked soil were extracted with the previously mentioned solvents and the results were studied by means of principal component analysis (PCA) of the whole data set (soil composition, solubility parameter of the solvent and recoveries of all PAHs) and partial least squares (PLS). Clay and organic matter content and the squared solubility parameter have the highest correlation with the recovery of PAHs from soil samples.     

Mitigating exotic impacts: restoring deer mouse populations elevated by an exotic food subsidy.

The threat posed by exotic organisms to native systems has led to extensive research on exotic invaders, yet management of invasives has progressed relatively slowly. This is partly due to poor understanding of how exotic species management influences native organisms. To address this shortfall, we experimentally evaluated the efficacy of an invasives management tool for restoring native deer mouse (Peromyscus maniculatus) populations elevated by exotic species. The exotic insects, Urophora spp., were introduced in North America for biological control of the Eurasian invader, spotted knapweed (Centaurea maculosa), but instead of controlling C. maculosa, Urophora have become an important food resource that doubles P. maniculatus populations, with substantial indirect effects on other organisms. We hypothesized that herbicide suppression of Urophora's host plant would reduce the Urophora food resource and restore P. maniculatus populations to natural levels. Prior to treatment, mouse populations did not differ between controls and treatments, but following treatment, P. maniculatus were half as abundant where treatment reduced Urophora. Peromyscus maniculatus is insensitive to direct herbicide effects, and herbicide-induced habitat changes could not explain the P. maniculatus response. Treatment-induced reductions of the Urophora food resource offered the most parsimonious explanation for the mouse response: Multistate mark-recapture models indicated that P. maniculatus survival declined where Urophora were removed, and survival rates were more correlated with variation in population size than movement rates. Other demographic and reproductive parameters (sex ratios, reproductive status, pregnancy rates, and juvenile recruitment) were unaffected by treatment. These results suggest the Urophora biocontrol elevated P. maniculatus survival, and the herbicide treatment restored mouse populations by removing the exotic food and reducing survival. This work illustrates the importance of mechanistic understandings of community and population ecology for improving invasive species management.     

Analysis of two-state multivariate phenotypic change in ecological studies

Analyses of two-state phenotypic change are common in ecological research. Some examples include phenotypic changes due to phenotypic plasticity between two environments, changes due to predator/non-predator character shifts, character displacement via competitive interactions, and patterns of sexual dimorphism. However, methods for analyzing phenotypic change for multivariate data have not been rigorously developed. Here we outline a method for testing vectors of phenotypic change in terms of two important attributes: the magnitude of change (vector length) and the direction of change described by trait covariation (angular difference between vectors). We describe a permutation procedure for testing these attributes, which allows non-targeted sources of variation to be held constant. We provide examples that illustrate the importance of considering vector attributes of phenotypic change in biological studies, and we demonstrate how greater inference can be made than by evaluating variance components with MANOVA alone. Finally, we consider how our method may be extended to more complex data.