Lichen transplants as a suitable tool to identify mercury pollution from waste incinerators: a case study from NE Italy

A lichen transplant study aimed at investigating a strong increase in mercury concentrations in lichens was run in a territory of NE Italy where background values were very low only 8 years before. Thalli of the lichen Pseudevernia furfuracea collected in a pristine area were exposed for 1.5, 3 and 6 months at 31 sites selected according to the observed pattern of Hg concentrations, location of the suspected source (a new waste incinerator) and prevailing wind direction. Hg strongly increased at eight sites after 1.5 months, at 12 after 3 months and at 20 after 6 months. The highest values were always located SW and S of the incinerator, in good agreement with the prevailing night wind direction. It was concluded that, although the immediate risk for the population living close to the incinerator is low, long-term hazard due to Hg accumulation in the surrounding environment should be seriously taken into account.     

Phytoplankton distribution during two contrasted summers in a Mediterranean harbour: combining automated submersible flow cytometry with conventional techniques

Present study was conducted in rapidly growing city Islamabad, and surface soils were collected from three major land cover types viz., built-up, drain side, and green areas. A total of seven physicochemical parameters and 11 metals were determined in surface soils. Factor analysis based on principal component analysis explained total variance of 68.0%, 64.5%, and 60.2% of three land cover types and showed high loadings for major elements (Mg and K) in built-up and green area and Fe in drain side. Top soil pollution index was carried out by using geo-accumulation index and metal pollution index (MPI₆). Concentration of major elements (Ca, Mg, Na, K) in surface soils is derived by parent material, whereas concentration of Fe, Ni, Pb, and Zn were mainly related with anthropogenic sources. Geostatistical methods such as kirging identified hotspot areas of metal contamination by Pb, Ni, and Zn in built-up areas influenced mainly by vehicular emissions and waste disposal. The results stresses that land clearing should be avoided to reduce contamination and management of urban soils.     

Conservation Prioritization Using GAP Data

Data collected by the Gap Analysis Program in the state of Idaho (U.S.A.) are used to prioritize the selection of locations for conservation action and research. Set coverage and integer programming algorithms provide a sequence of localities that maximize the number of species or vegetation classes represented at each step. Richness maps of vegetation cover class diversity, terrestrial vertebrate species diversity ("hot spot analysis"), endangered, threatened, and candidate species diversity, and unprotected vertebrate species diversity ("gap analysis"), when prioritized, show a rapid accumulation of species as more localities are chosen for terrestrial vertebrates and unprotected vertebrates. Gap analysis identifies four target areas ("gaps") that include 79 of the 83 vertebrate species not currently protected. Accumulation of vegetation cover classes and endangered, threatened, and candidate species is much slower. Sweep analysis is used to determine how well prioritizing on one component of diversity accumulates other components. Endangered, threatened, and candidate species do not sweep total vertebrates as well as unprotected vertebrates do, but are better than vegetation classes. Total vertebrates sweep endangered, threatened, and candidate species better than unprotected vertebrates do, which in turn are better than vegetation classes. We emphasize that prioritization must be part of conservation efforts at multiple scales and that prioritization points out important localities where more detailed work mast be undertaken.     

Streamside Forest Buffer Width Needed to Protect Stream Water Quality,Habitat, and Organisms: A Literature Review

This literature review addresses how wide a streamside forest buffer needs to be to protect water quality, habitat, and biota for small streams (≤~100 km² or ~5th order watershed) with a focus on eight functions: (1) subsurface nitrate removal varied inversely with subsurface water flux and for sites with water flux >50 l/m/day (~40% avg base flow to Chesapeake Bay) median removal efficiency was 55% (26‐64%) for buffers <40 m wide and 89% (27‐99%) for buffers >40 m wide; (2) sediment trapping was ~65 and ~85% for a 10‐ and 30‐m buffer, respectively, based on streamside field or experimentally loaded sites; (3) stream channel width was significantly wider when bordered by ~25‐m buffer (relative to no forest) with no additional widening for buffers ≥25 m; (4) channel meandering and bank erosion were lower in forest but more studies are needed to determine the effect of buffer width; (5) temperature remained within 2°C of levels in a fully forested watershed with a buffer ≥20 m but full protection against thermal change requires buffers ≥30 m; (6) large woody debris (LWD) has been poorly studied but we infer a buffer width equal to the height of mature streamside trees (~30 m) can provide natural input levels; (7, 8) macroinvertebrate and fish communities, and their instream habitat, remain near a natural or semi‐natural state when buffered by ≥30 m of forest. Overall, buffers ≥30 m wide are needed to protect the physical, chemical, and biological integrity of small streams.     

Environmental hazards and waste management in Nsukka urban metropolis in Enugu State of Nigeria: how much are people willing to pay?

Solid waste management in Nsukka town in Enugu state of Nigeria has remained a major challenge despite the efforts of the state government through the Enugu State Waste Management Agency (ESWAMA). The current method whereby households dump refuse at designated locations by the road side to be cleared later has not yielded much improved sanitation of the town. In this study we propose an alternative waste management method that is believed to be superior to the status quo if properly managed. This study applies Contingent Valuation Method (CVM) to estimate the households’ willingness to pay (WTP) for this new method in order to ascertain its applicability in Nsukka urban. Data were collected from a sample of 500 households stratified according to major streets in the town. The results show that the mean WTP using different specifications of the model varies from N527.50 (about 2.68) to N530.90 (about 2.68) per month. The policy implication is that if the waste management agency adopts the proposed scenario and manages it well the average revenue realizable per month would be about N13,750,516 (about $69,800). The authorities can compare this with the cost of providing the service and see if it is worth the effort.     

Bateman gradients in a promiscuous mating system

The Bateman gradient is increasingly used to measure sexual selection and characterize mating systems. In a landmark paper, Arnold and Duvall (Am Nat 143:317–348, 1994) formulated predictions about the relationships between sex-specific Bateman gradients and the major types of mating system. In promiscuous species, gradients are expected to be strong and similar in both sexes. Current support for this prediction however remains equivocal as reported male gradients are almost constantly steeper than female gradients. Here, we estimated Bateman gradients in a wild population of Eastern chipmunks (Tamias striatus) over two reproductive seasons characterized by extreme levels of promiscuity and unbiased operational sex ratios. We found significant and positive Bateman gradients for both sexes. The gradients were not different among sexes suggesting that the strength of sexual selection was similar for males and females. The opportunity for selection was also particularly strong for a promiscuous species and not different among sexes. Our results thus support the predicted Bateman gradients for a promiscuous mating system.     

An integrated decision-support process for adaptation planning: climate change as impetus for scenario planning in an agricultural region of Canada

The amount of information required to adapt to climate change is vast: downscaled climate projections, information on environmental impact, sectoral performance, external drivers, regional strategies, policies and practices. It can be argued that most of this information is accessible at the community/regional level, and thus, the important challenges to adaptation are not information gaps, but constraints created by fragmented planning decisions and a sector-by-sector basis for financial and human resource allocations. To strategically address this through adaptation planning, we developed and tested a place-based decision-making framework that creates an integrated platform for considering regional and global sectoral drivers in Eastern Ontario, Canada. Using available socioeconomic and biophysical information from regional authorities, alternative future scenarios were used to describe the range of socioeconomic futures and their vulnerabilities to climate change. We found that: (1) integration of diverse sets of available data (rather than narrowly focused sectoral assessments) helped identify shared common objectives (maximizing the long-term environmental, economic, social well-being within the region), (2) a high degree of congruence existed as the key drivers of change, irrespective of sector, (3) exploring the future scenarios highlighted shared regional priorities and helped identify adaptation priorities requiring more integrated regional planning.     

Hot water flushing for immiscible displacement of a viscous NAPL

Thermal remediation techniques, such as hot water flooding, are emerging technologies that have been proposed for the removal of nonaqueous phase liquids (NAPLs) from the subsurface. In this study a combined laboratory and modeling investigation was conducted to determine if hot water flooding techniques would improve NAPL mass removal compared to ambient temperature water flushing. Two experiments were conducted in a bench scale two-dimensional sandbox (55 cmx45 cmx1.3 cm) and NAPL saturations were quantified using a light transmission apparatus. In these immiscible displacement experiments the aqueous phase, at 22 degrees C and 50 degrees C, displaced a zone with initial NAPL saturations on the order of 85%. The interfacial tension and viscosity of the selected light NAPL, Voltesso 35, are strongly temperature-dependent. Experimental results suggest that hot water flooding reduced the size of the high NAPL saturation zone, in comparison to the cold water flood, and yielded greater NAPL mass recovery (75% NAPL removal vs. 64%). Hot water flooding did not, however, result in lower residual NAPL saturations. A numerical simulator was modified to include simultaneous flow of water and organic phases, energy transport, temperature and pressure. Model predictions of mass removal and NAPL saturation profiles compared well with observed behavior. A sensitivity analysis indicates that the utility of hot water flooding improves with the increasing temperature dependence of NAPL hydraulic properties.