Circumpolar terrestrial arthropod monitoring: A review of ongoing activities,opportunities and challenges,with a focus on spiders

The terrestrial chapter of the Circumpolar Biodiversity Monitoring Programme (CBMP) has the potential to bring international multi-taxon, long-term monitoring together, but detailed fundamental species information for Arctic arthropods lags far behind that for vertebrates and plants. In this paper, we demonstrate this major challenge to the CBMP by focussing on spiders (Order: Araneae) as an example group. We collate available circumpolar data on the distribution of spiders and highlight the current monitoring opportunities and identify the key knowledge gaps to address before monitoring can become efficient. We found spider data to be more complete than data for other taxa, but still variable in quality and availability between Arctic regions, highlighting the need for greater international co-operation for baseline studies and data sharing. There is also a dearth of long-term datasets for spiders and other arthropod groups from which to assess status and trends of biodiversity. Therefore, baseline studies should be conducted at all monitoring stations and we make recommendations for the development of the CBMP in relation to terrestrial arthropods more generally.     

The academic medical centre and nongovernmental organisation partnership following a natural disaster

The global response to the 12 January 2010 earthquake in Haiti revealed the ability to mobilise medical teams quickly and effectively when academic medical centres partner non-governmental organisations (NGO) that already have a presence in a zone of devastation. Most established NGOs based in a certain region are accustomed to managing the medical conditions that are common to that area and will need additional and specialised support to treat the flux of myriad injured persons. Furthermore, an NGO with an established presence in a region prior to a disaster appears better positioned to provide sustained recovery and rehabilitation relief. Academic medical centres can supply these essential specialised resources for a prolonged time. This relationship between NGOs and academic medical centres should be further developed prior to another disaster response. This model has great potential with regard to the rapid preparation and worldwide deployment of skilled medical and surgical teams when needed following a disaster, as well as to the subsequent critical recovery phase.     

Effect of the effective stress coefficient and sorption-induced strain on the evolution of coal permeability: Experimental observations

Permeability is one of the most important parameters for CO₂ injection in coal to enhance coalbed methane recovery. Laboratory characterization of coal permeability provides useful information for in situ permeability behavior of coal seams when adsorbing gases such as CO₂ are injected. In this study, a series of experiments have been conducted for coal samples using both non-adsorbing and adsorbing gases at various confining stresses and pore pressures. Our observations have showed that even under controlled stress conditions, coal permeability decreases with respect to pore pressure during the injection of adsorbing gases. In order to find out the causes of permeability decrease for adsorbing gases, a non-adsorbing gas (helium) is used to determine the effective stress coefficient. In these experiments using helium, the impact of gas sorption can be neglected and any permeability reduction is considered as due to the variation in the effective stress, which is controlled by the effective stress coefficient. The results show that the effective stress coefficient is pore pressure dependent and less than unity for the coal samples studied. The permeability reduction from helium experiments is then used to calibrate the subsequent flow-through experiments using adsorbing gases, CH₄ and CO₂. Through this calibration, the sole effect of sorption-induced strain on permeability change is obtained for these adsorbing gas flow-through experiments. In this paper, experimental results and analyses are reported including how the impact of effective stress coefficient is separated from that of the sorption-induced strain on the evolution of coal permeability.     

The European eel quality database: towards a pan-European monitoring of eel quality

The stocks of the European eel Anguilla anguilla are in decline and there is an increasing awareness that poor health status due to contaminants and/or diseases might be a key element in this decline and might be a hindrance to recovery. Many countries have started compiling data on the health status of eels in their water bodies. Objectives for these monitoring actions are diverse and there is a large amount of information collected by EU member countries. However, this information is widely scattered over Europe in agencies, institutes or universities. As there is a growing need to collect and report on data on the health status of the eel on international level, the Joint EIFAC/ICES Working Group on Eels initiated in September 2007 the set up of an European Eel Quality Database to collect recent data of contaminants and diseases over the distribution area of the eel. This paper describes the aim, the set up and future development of the database in order to give it greater publicity and to call on scientists or managers to submit data on eel health status. The database represents now the first comprehensive pan-European compilation of eel health data, including data from over 10,000 eels from approximately 1,200 sites over 14 countries. Preliminary work has indicated a number of shortcomings and future developments will be needed. Guaranteeing further development of the database, harmonisation of methods, quality assurance, and setting up harmonised eel monitoring strategies over Europe will be a great challenge and will need pan-European cooperative work.     

A Method for Spatially Explicit Representation of Sub-watershed Sediment Yield,Southern California,USA

We present here a method to integrate geologic, topographic, and land-cover data in a geographic information system to provide a fine-scale, spatially explicit prediction of sediment yield to support management applications. The method is fundamentally qualitative but can be quantified using preexisting sediment-yield data, where available, to verify predictions using other independent data sets. In the 674-km² Sespe Creek watershed of southern California, 30 unique “geomorphic landscape units” (GLUs, defined by relatively homogenous areas of geology, hillslope gradient, and land cover) provide a framework for discriminating relative rates of sediment yield across this landscape. Field observations define three broad groupings of GLUs that are well-associated with types, relative magnitudes, and rates of erosion processes. These relative rates were then quantified using sediment-removal data from nearby debris basins, which allow relatively low-precision but robust calculations of both local and whole-watershed sediment yields, based on the key assumption that minimal sediment storage throughout most of the watershed supports near-equivalency of long-term rates of hillslope sediment production and watershed sediment yield. The accuracy of these calculations can be independently assessed using geologically inferred uplift rates and integrated suspended sediment measurements from mainstem Sespe Creek, which indicate watershed-averaged erosion rates between about 0.6–1.0 mm year^?1 and corresponding sediment yields of about 2 × 10³ t km^?2 year^?1. A spatially explicit representation of sediment production is particularly useful in a region where wildfires, rapid urban development, and the downstream delivery of upstream sediment loads are critical drivers of both geomorphic processes and land-use management.     

Risk of motor vehicle accident death among 1.3 million veterans of the Iraq and Afghanistan wars

Objective: We conducted a cohort study of recent wartime veterans to determine the postservice mortality risk due to motor vehicle accidents (MVAs).

Methods: Veterans were identified from the Defense Manpower Data Center records. Deployment to te Iraq or Afghanistan war zone was determined from the Contingency Tracking System. Vital status of 317,581 deployed and 964,493 nondeployed veterans was followed from their discharge dates between 2001 to 2007 until earlier of date of death or December 31, 2009. Underlying causes of death were obtained from the National Death Index Plus.

Results: Based on 9,353 deaths (deployed, 1,650; nondeployed, 7,703), of which 779 were MVA deaths as drivers (166; 613), both cohorts had 25 to 24% lower mortality risk from all causes but had 44 to 45% higher risk of MVA deaths relative to the U.S. general population. The higher MVA mortality risk was not associated with deployment to the war zone. After controlling for age, sex, race, marital status, branch of service, and rank, the risk for deployed veterans was comparable to that of nondeployed veterans (hazard ratio = 0.91; 95% confidence interval, 0.77–1.09).

Conclusions: Veterans exhibit significantly higher risk of MVA deaths compared to the U.S. general population. However, deployment to the Iraq or Afghanistan war was not associated with the excess risk.     

Dual poroelastic response of a coal seam to CO2 injection

Although the influence of gas sorption-induced coal deformation on porosity and permeability has been widely recognized, prior studies are all under conditions of no change in overburden stress and effective stress-absent where effective stresses scale inversely with applied pore pressures. Here we extend formalism to couple the transport and sorption of a compressible fluid within a dual-porosity medium where the effects of deformation are rigorously accommodated. This relaxes the prior assumption that total stresses remain constant and allows exploration of the full range of mechanical boundary conditions from invariant stress to restrained displacement. Evolution laws for permeability and related porosity are defined at the micro-scale and applied to both matrix and an assumed orthogonal, regular and continuous fracture system. Permeability and porosity respond to changes in effective stress where sorption-induced strains may build total stresses and elevate effective stresses. Gas accumulation occurs in both free- and adsorbed-phases and due to effective grain and skeletal compressibilities. A finite element model is applied to quantify the net change in permeability, the gas flow, and the resultant deformation in a prototypical coal seam under in situ stresses. Results illustrate how the CO₂ injectivity is controlled both by the competition between the effective stress and the gas transport induced volume change within the matrix system and by the dynamic interaction between the matrix system and the fracture system. For typical parameters, initial injection-related increases in permeability due to reduced effective stresses may endure for days to years but are ultimately countered by long-term reductions in permeability which may decline by an order of magnitude. Models suggest the crucial role of stresses and the dynamic interaction between matrix and fractures in correctly conditioning the observed response.     

Effects of 17α-trenbolone and melengestrol acetate on Xenopus laevis growth, development, and survival

The synthetic growth-promoting hormones trenbolone and melengestrol acetate have been detected in the environment near beef cattle feedlots and are reportedly transported via wind-borne particulate matter. Therefore, movement of synthetic hormones from beef cattle feedlots to water bodies via particulate matter is possible. Our objective was to evaluate potential effects of 17α-trenbolone (17α-TB), melengestrol acetate (MGA), and combinations of both on growth, development, and survival of Xenopus laevis larvae. On post-hatch day 2 (stage 33/34), X. laevis larvae were exposed to three nominal concentrations of 17α-TB (10, 100, and 500 ng/L), MGA (1, 10, and 100 ng/L), a combination of both (1/10, 10/100, and 100/500 ng/L MGA/17α-TB), frog embryo teratogenesis assay-Xenopus medium, or a solvent control. Significant increases in all X. laevis growth metrics were observed among larvae in the 1 ng/L MGA?+?10 ng/L 17α-TB and 10 ng/L MGA?+?100 ng/L 17α-TB treatments. Stage of development was increased among larvae in the 1 ng/L MGA?+?10 ng/L 17α-TB treatment group and significantly decreased among those in the 500 ng/L 17α-TB treatment. Total body mass and snout–vent length of X. laevis larvae were significantly reduced in the 100 ng/L MGA and 100 ng/L MGA?+?500 ng/L 17α-TB treatment groups. Larvae exposed to 500 ng/L 17α-TB had decreased total body mass, snout–vent length, and total length. In general, growth measurements decreased with increasing concentration of MGA, 17α-TB, or a combination of both. Survival among all treatments was not significantly different from controls. Amphibians exposed to MGA and 17α-TB in the environment may experience alterations in growth and development.     

Estimation of terrestrial chemical spill risk factors using a modified Delphi approach

The large number of chemical spills each year in the United States presents a potentially significant risk to human health and the environment. In an effort to manage this risk, the authors are developing a screening tool to assess the immediate threat to human and environmental receptors from land-based chemical spills. As part of this development effort, a modified Delphi survey was employed to determine the most important factors governing this risk and the relative importance of these factors. Results of the survey indicate that accounting for the attributes of the spilled chemical as well as the characteristics of the surrounding environment is imperative in making informed decisions regarding spill planning and mitigation. Survey results further indicate the greatest concern during spill events to be the risk to human health, which must be considered directly as well as factored into decisions concerning the protection of environmental receptors.     

Water-based condensation particle counters for environmental monitoring of ultrafine particles

TSI Inc. (Shoreview, MN) has introduced three new water-based condensation particle counters (WCPCS) that were designed to detect airborne particles larger than 2.5 nm (model 3786), 5 nm (model 3785), and either 10 or 20 nm (model 3782). These WCPCs are well suited for real-time, environmental monitoring of number concentration of airborne ultrafine particles. Their unique design incorporates the use of water as the working fluid instead of alcohol. Water is odor free, readily available, and eliminates the problem of water condensation and absorption into alcohol working fluids during operation in humid environments. In this study, the performance of three TSI WCPCs was characterized for several aerosol compositions, including sucrose, salt (NaCl), dioctyl sebacate (DOS), dioctyl phthalate (DOP), emery oil (poly-alpha-olefin), silver, impurity residue particles, and ambient aerosol particles. All particles were size selected using a nano differential mobility analyzer (nano-DMA; model 3085, TSI Inc.) to create monodisperse challenge aerosols. The challenge aerosol was mixed uniformly with clean makeup flow and split into a WCPC and a reference instrument to determine the counting efficiency of the WCPC. For the model 3785 WCPC, the D50 (i.e., the particle diameter with 50% counting efficiency) was determined to be 3.1 nm for salt particles, 4.7 nm for sucrose and ambient particles, 5.6 nm for silver particles, and >50 nm for ultrapure oil particles. The sensitivity to oil droplets increased dramatically (D50 < 10 nm) when the oil was slightly contaminated. The D50 of model 3786 ultrafine water-based CPC (UWCPC) was 2.4 nm for impurity residue particles. The D50 of the model 3782 WCPC was 10.8 (with a nominal setting of 10 nm) or 19.8 nm (with a nominal setting of 20 nm) for sucrose particles. All three WCPCs have response times of less than 2 or 3 sec and are therefore able to detect fast-changing events.