Measurement of machinery safety level: European framework for product control: Particular case: Spanish framework for market surveillance

Current brief aims to introduce the concept of safety in European industrial sectors, particularly in mechanics and machinery industry. It also highlights the importance to ensure an even level of machinery safety along the European Union, setting up the appropriate frame and procedures to keep it under control. An overview over market surveillance activities for machinery (regulations, main actors and their roles) first at Community level, and secondly an approach to one of the Member States is also introduced.     

Performance assessment of integrated energy systems for HVAC applications

In this article, energy and exergy analyses are conducted for two integrated systems which can be used in HVAC applications. These two systems are analyzed for the cases of single generation, cogeneration and trigeneration, and their performances are evaluated through energy and exergy efficiencies. The parametric studies are performed to investigate the effects of using cogeneration and extended to trigeneration on the system performance. To perform the comparisons between the systems for multiple options, the same amounts of outputs (in terms of electricity, heating, cooling) are produced for all systems. The energy analyses of systems 1 and 2 show a great benefit for moving from single generation to trigeneration, with the trigeneration efficiencies of 83.5% and 87.2%, respectively, and single generation efficiencies of 47% for both systems. However, the exergy analyses show that trigeneration may not always become more efficient than single generation, particularly for system 1, due to the fact that the trigeneration exergy efficiency is 38.7% and the corresponding single generation efficiency is 44.3%. For system 2, the trigeneration exergy efficiency is 52.7% while the single generation efficiency becomes 44.3%. Depending on the type of cogeneration or cogeneration design, the system can be more efficient.     

Optimum Methods of Inactivation of Strongyloides stercoralis Larvae from Reclaimed Wastewater

Strongyloidiasis presents a major health hazard when reusing wastewater. Albendazol with a concentration of 4 mg/l, a contact time of 45 min, pH 1.2 and pH 10.2, killed the larva. The larva was also killed with a 0.03% concentration of iodine and a detention time of 30 min or a 0.04% concentration of iodine and a contact time of 10 min. The required detention time to inactivate larva in water was found to be 17 days. The minimum revealed residual chlorine to kill the larvae was 4 mg/l with 120 min of detention time, and a minimum contact time was found to be 80 min with a residual of 23 mg/l. Many methods are available to inactivate the Strongyloides stercoralis, which could be acids, alkaline chemicals, larvicidal chemicals, super chlorination, or just detention time. The best method must be determined according to the prevailing specific environmental site and the feasibility of the selected method(s).     

Manganese and trace-metal mobility under reducing conditions following in situ oxidation of TCE by KMnO4: a laboratory column experiment

The stability of Mn oxides, and the potential for mobilization of associated trace metals, were assessed by simulating the onset of microbially-mediated reducing conditions in a continuous-flow column experiment. The column had previously been used for an in situ chemical oxidation (ISCO) experiment in which trichloroethylene was reacted with permanganate in the presence of aqueous trace metals, which produced Mn oxyhydroxides (MnO(x)) that sequestered the trace metals and coated the column sand. The column influent solution represented the incursion of ambient groundwater containing dissolved organic carbon (DOC) into an ISCO treatment zone. The influx of DOC-containing groundwater initiated a series of cation-exchange, surface-complexation and reductive-dissolution reactions that controlled the release of aqueous metals from the system. Peak concentrations in the effluent occurred in the order Na, Mo, Cr, Zn, K, Mn, Fe, Pb, Mg, Ni, Cu and Ca. Manganese release from the column was controlled by a combination of cation exchange, reductive dissolution and precipitation of rhodochrosite. The trend in Fe concentrations was similar to that of Mn, and also resulted from a combination of reductive dissolution and cation exchange. Cation exchange and/or surface-complexation were the primary mechanisms controlling Cu, Ni, Mo and Pb release to solution, while Zn and Cr concentrations did not display coherent trends. Although metal release from the treatment zone was evident in the data, concentrations of trace metals remained below 0.05 mg L(-1) with the exception of Mo which reached concentrations on the order of 1 mg L(-1). The establishment of anaerobic conditions in ISCO-treated aquifers may result in a prolonged flux of aqueous Mn(II), but with the exception of MoO(4)(2-), it is unlikely that trace metals sequestered with MnO(x) during ISCO will be released to the groundwater in elevated concentrations.     

Leachate generation and biogas energy recovery in the Jebel Chakir municipal solid waste landfill,Tunisia

A survey was conducted between 2006 and 2008 in order to identify municipal solid waste (MSW) composition and its influence on leachate generation and to assess the amount of biogas yield from the Jebel Chakir landfill in Tunis City. The organic fraction was the predominant compound in the MSW, followed by paper, fine, plastic, leather, rubber, metal, textile, glass and ceramic. The average MSW moisture content varies from 60 % in the wet season to 80 % in the dry one. The recognised MSW composition is well representative if compared to that of cities in developing countries. A large leachate quantity is produced in the landfill of Jebel Chakir, despite the negative water balance of the site. Based on the annual MSW landfilled quantities and using the LandGEM model, the expected peak landfill gas (LFG) production is estimated to occur 1 year after the landfill closure with a rate of 3.53 × 10⁷ m³/year. The analysis of the potential conversion of LFG to electric energy shows it at a total LFG-to-electricity energy of around 257 GWh with a heating value of 4,475 kcal/m³ based on an LFG collection efficiency of 33 % and energy efficiency of 33 % giving an economic feasibility for a 10 MW power plant.     

Assessment of elemental distribution and heavy metals contamination in phosphate deposits: potential health risk assessment of finer-grained size fraction

The concentrations and chemical distributions of heavy metals (Cd, Cr, Ni, Zn, U, and V) in the Al-Jiza phosphate ores were investigated. Typically, the mean concentration values of Cd, Cr, Ni, U, and Zn are 15 ± 8, 109 ± 21, 34 ± 6, 211 ± 55, 142 ± 55, and 161 ± 57 mg kg^?1, respectively. On the other hand, the encountered average concentration values of Cd, Cr, Ni, Zn, U, and V in the phosphate dust particles (<0.053) were found to be 22 ± 5, 179 ± 5, 67 ± 11, 441 ± 14, 225 ± 58, and 311 ± 9 mg kg^?1, respectively. The contamination factors of U and Cr are greater than 1, indicating that these heavy metals could be potentially hazardous, if released to the environment. Multivariate statistical analysis allowed the identification of three main factors controlling the distribution of these heavy metals and the other chemical constituents. The extracted factors are as follows: francolite mineral factor, clay minerals factor, and diagenesis factor. Health risk assessments of non-cancerous effects in finer-grained size fraction that might be caused by contamination with the heavy elements have been calculated for both children and adults. The risk assessments in case of children for non-cancerous effects showed that U has values greater than the safe level of hazard index (HI = 1). In case of adults, the value of risk for U is also higher as compared to those of Cd, Ni, Cr, and Zn where it lies within the safe range of hazard index (HI < 1). Child health risk assessment indicates that children are more vulnerable to contaminants from phosphate mining than adults.     

Numerical simulation of the impacts of reflected tsunami waves on Pulo Raya Island during the 2004 Indian Ocean tsunami

There are numerous small populated islands near western Sumatra in Indonesia. The Weh, Banyak, Mentawai, and Enggano islands are home to many Indonesians. These small islands have been found to be effective at reducing tsunami wave energy on several occasions. At the same time, they are situated around Sumatras active subduction zone and are often among the areas most affected by tsunamisas in the case of Pulo Raya Island, in the western Aceh Jaya district about 800 m from Sumatra. Pulo Raya was devastated by the 2004 Indian Ocean tsunami. This study investigates the hydrodynamic processes of reflected tsunami waves and their impact on Pulo Raya, using a Cornell Multi-grid COupled Tsunami (COMCOT) model to simulate the tsunami wave runup and subsequent hydrodynamic processes. The simulation confirms eyewitness accounts that it was not the initial runup, but the reflected waves that devastated the worst-hit areas of the island. As a result, we can recommend that governments and communities on small islands need to anticipate the impacts of reflected waves following a tsunami, especially at lee side of of the island that was perceived to be a safer place by the island community before the 2004 Indian Ocean tsunami.