Water striders (family Gerridae): mercury sentinels in small freshwater ecosystems

To circumvent some of the previous limitations associated with contaminant-monitoring programs, we tested the suitability of the water strider (Hemiptera: Gerridae) as a mercury sentinel by comparing total mercury concentrations in water striders and brook trout (Salvelinus fontinalis) from a variety of stream sites in New Brunswick, Canada. There was a strong association between the two variables across sites (r(2)=0.81, P<0.001) in systems where both atmospheric deposition and a point source (an abandoned gold mine) were likely contributing to ambient mercury levels. In a small stream draining the gold mine tailings pile, water striders had mercury concentrations an order of magnitude higher than those from reference locations. Temporal variation at three southern New Brunswick stream sites was non-significant. These results suggest that water strider mercury levels accurately quantify food chain entry of the element. The use of sentinel species holds great potential for expanding contaminant-monitoring programs.     

Radioactivity concentrations of 40K, 134Cs, 137Cs, 90Sr, 241Am, 238Pu and 239+240Pu radionuclides in Jordanian soil samples

In November 2000, surface and core soil samples were collected from different regions of Jordan. The samples were analyzed by direct gamma spectrometry and combined radiochemical separation procedure to quantify (40)K, (134)Cs, (137)Cs, (90)Sr, (241)Am, (238)Pu and (239+240)Pu radioactivity. Concentrations (Bq.kg(-1) dry weight) have been observed to vary in the range 1.5-2.6 for (134)Cs, 2.8-11.4 for (90)Sr, and 0.13-0.48 for (241)Am, 0.016-0.062 for (238)Pu, 0.28-1.01 for (239+240)Pu and 155-543 for (40)K. The typical concentration of (137)Cs found in topsoils (0-2 cm) ranged in 7.5-576 Bq.kg(-1), dry weight. These values were greater than those observed in samples taken at greater depths (up to 32 cm). Activity ratios of (134)Cs/(137)Cs, (90)Sr/(137)Cs, (239+240)Pu/(137)Cs, (238)Pu/(137)Cs, (241)Am/(137)Cs, (239+240)Pu/(238)Pu and (241)Am /(238)Pu have mean values of 0.0049 (R=1), 0.29 (R=0.76), 0.41 (R=0.90), 0.39 (R=0.85), 0.41 (R=0.88), 7.72 (R=0.97) and 16.66 (R=0.98), respectively. The underlying concentrations were correlated and relatively higher than those reported in neighboring countries. One moss sample, as a biomonitor indicator, was measured and evaluated along with the soil samples. Its data showed higher concentrations of all measured radionuclides due to accumulations over years. The depth distribution of the fission product (137)Cs and the total deposition (Bq.m(-2)) were also studied in selected samples. Estimations of the annual effective dose equivalent due to (137)Cs-soil contamination showed values up to more than 200 microSv.     

Assessment and analysis of industrial liquid waste and sludge disposal at unlined landfill sites in arid climate

Municipal solid waste disposal sites in arid countries such as Kuwait receive various types of waste materials like sewage sludge, chemical waste and other debris. Large amounts of leachate are expected to be generated due to the improper disposal of industrial wastewater, sewage sludge and chemical wastes with municipal solid waste at landfill sites even though the rainwater is scarce. Almost 95% of all solid waste generated in Kuwait during the last 10 years was dumped in five unlined landfills. The sites accepting liquid waste consist of old sand quarries that do not follow any specific engineering guidelines. With the current practice, contamination of the ground water table is possible due to the close location of the water table beneath the bottom of the waste disposal sites. This study determined the percentage of industrial liquid waste and sludge of the total waste dumped at the landfill sites, analyzed the chemical characteristics of liquid waste stream and contaminated water at disposal sites, and finally evaluated the possible risk posed by the continuous dumping of such wastes at the unlined landfills. Statistical analysis has been performed on the disposal and characterization of industrial wastewater and sludge at five active landfill sites. The chemical analysis shows that all the industrial wastes and sludge have high concentrations of COD, suspended solids, and heavy metals. Results show that from 1993 to 2000, 5.14+/-1.13 million t of total wastes were disposed per year in all active landfill sites in Kuwait. The share of industrial liquid and sludge waste was 1.85+/-0.19 million t representing 37.22+/-6.85% of total waste disposed in all landfill sites. Such wastes contribute to landfill leachate which pollutes groundwater and may enter the food chain causing adverse health effects. Lined evaporation ponds are suggested as an economical and safe solution for industrial wastewater and sludge disposal in the arid climate of Kuwait.     

Are methylmercury concentrations in the wetlands of Kejimkujik National Park, Nova Scotia, Canada, dependent on geology?

In the relatively pristine ecosystem in Kejimkujik Park, Nova Scotia, methylmercury (MeHg) concentrations in loons, Gavia immer, are among the highest recorded anywhere in the world. This study investigated the influence of bedrock lithology on MeHg concentrations in wetlands. Twenty-five different wetland field sites were sampled over four different bedrock lithologies; Kejimkujik monzogranite, black sulfidic slate, gray slate, and greywacke. Soil samples were analyzed for ethylmercury (EtHg), MeHg, total Hg, acid-volatile sulfides (AVS), organic matter, and water content as well as the biological parameters, mercury methyltransferase (HgMT) activity, sulfate reduction rates, fatty acid methyl ester (FAME) composition, and acidity. Methylmercury concentrations in the wetlands were highly dependent (P < 0.08) on lithology with no significant difference between bogs, fens, and swamps. Methylmercury concentrations in wetland soils developed on Kejimkujik monzogranite averaged 900 ng kg(-1) compared with only 300 ng kg(-1) in wetland soils developed on black sulfidic slate. Fatty acid methyl ester composition was also lithologically dependent (P < 0.001) with biomarkers for Desulfobulbus spp. discriminating between sites containing high and low MeHg concentrations. Levels of MeHg in wetlands were predicted mainly (41% of the sum of squares) by HgMT activity that differed (P < 0.009) between wetlands, with activity in bogs almost three times that present in swamps. Wetland MeHg concentrations are highly dependent on the lithology on which they have developed for largely biological reasons.     

Quantitative Assessment of the Intertidal Environment of Kuwait II: Controlling Factors

Multivariate analysis of variance, canonical correlation and canonical discriminate analysis were performed on environmental data collected from the Kuwaiti intertidal zone to determine the statistical relationships between the sediment, chemical, biological, spatial and temporal variables. The quantitative analysis showed that the sediment type was the paramount factor influencing the distribution and composition of the intertidal benthic fauna. The muddy, sandy and rocky shores support three distinct faunal communities. The seasonal variation in the benthic fauna community was not statistically significant but variation in biological data due to differences in transect location and tidal level were significant. This spatial variation has been attributed to differences in sediment and substrate types. The physico-chemical parameters were found to correlate positively with the mud content of the sediments but were unimportant in the overall composition of the intertidal fauna. This paper complements the results reported in Al Bakriet al. (1997–Part I) in establishing a valuable benchmark for assessing environmental impacts and for developing sustainable coastal zone management in Kuwait. The integrated approach outlined here could be adopted to develop a sound basis for the protection and management of coastal environments and resources in similar areas.     

FLOOD CONTROL RESERVOIR OPERATIONS UNDER ENVIRONMENTAL RESTRAINTS1

ABSTRACT: A flood control reservoir protects valuable developments on the downstream flood plain by storing flood waters and releasing them at a rate that will reduce the downstream damage. The water surface level of the flood pool behind the dam can fluctuate considerably during the occurrence of a large magnitude flood causing the inundation of trees, low vegetation, and water based recreation facilities located in those areas of the flood pool area that are normally well above the water level. The amount of damage that will occur in the upper levels of the flood storage area will depend on the depth and duration of the inundation that occurs. This, in turn, is directly related to the operating policy for the reservoir. A dynamic programming optimization model of flood control reservoir operation is presented. This model determines the reservoir operating schedule that minimizes downstream flood damages. Various constraints are added to the model to account for the environmental impacts of long periods of flood storage.     

UTILIZATION OF MODELS IN WATER RESOURCES1

ABSTRACT: A 1984 survey of water resources personnel was conducted to determine the current and future uses of mathematical models in planning, design and operations of water resources systems. Eighty-six percent of those responding indicated they have used mathematical models in the last year. Lack of appropriate data, inadequate time and funding to do the modeling and lack of models that represent the “real world” situation were the most frequently mentioned constraints to model use. Microcomputers were seen as having a positive influence on mathematical model use in water resources.     

Prevalence and characteristics of road traffic injuries among young drivers in Oman, 2009–2011

Objectives: Studies from different parts of the world have indicated that the impact of road traffic incidents disproportionally affects young adults. Few known studies have been forthcoming from Arabian Gulf countries. Within Oman, a high proportion of the population is under the age of 20. Coupled with the drastic increase in motorization in recent years, there is a need to understand the state of road safety among young people in Oman. The current research aimed to explore the prevalence and characteristics of road traffic injuries among young drivers aged 17–25 years.

Methods: Crash data from 2009 to 2011 were extracted from the Directorate General of Traffic, Royal Oman Police (ROP) database in Oman. The data were analyzed to explore the impact of road crashes on young people (17–25 years), the characteristics of young driver crashes, and how these differ from older drivers and to identify key predictors of fatalities in young driver crashes.

Results: Overall, young people were overrepresented in injuries and fatalities within the sample time period. Though it is true that many young people in crashes were driving at the time, it was also evident that young people were often victims in a crash caused by someone else. Thus, to reduce the impact of road crashes on young people, there is a need to generally address road safety within Oman. When young drivers were involved in crashes they were predominantly male. The types of crashes these drivers have can be broadly attributed to risk taking and inexperience. Speeding and nighttime driving were the key risk factors for fatalities.

Conclusion: The results highlight the need to address young driver safety in Oman. From these findings, the introduction of a graduated driver licensing system with nighttime driving restrictions could significantly improve young driver safety.     

An economic and environmental framework for analyzing globally sourced auto parts packaging system

Competitive forces are driving US domestic manufacturers to source parts globally, which significantly extends their supply chain and introduces new sustainability concerns. This paper addresses the situation from an operating division manager's perspective. We present an approach to packaging system assessment which considers the division manager's span of control, addresses the design of packaging and the corresponding logistics processes, and incorporates both cost and environmental impacts. A construct familiar to operations managers, the value stream map, is adapted to model material flow of both parts and packages, and an integrated material flow analysis is used as the common basis for cost analysis, a modified life cycle environmental impact analysis, and an energy consumption analysis. The framework is illustrated using a case study of a major US automaker.