Synergistic Interactions between Habitat Fragmentation and Fire in Evergreen Tropical Forests

Abstract: The growing prevalence of fragmentation and fire in tropical forests makes it imperative to quantify changes in these disturbances and to understand the ways in which they interact across the landscape. I used a multitemporal series of Landsat images to study the incidence and coincidence of fire and fragmentation in two areas of Pará state in the eastern Brazilian Amazon: Tailândia and Paragominase. In both areas, deforestation and forest fires were quantified for time series of 6–10 years. The Tailândia study area typifies a landscape with the herringbone pattern of government-settled colonists, and the Paragominas area is dominated by large cattle ranches. In both areas, over 90% of the forests affected by fire were associated with forest edges. Although most burned forest occurred within 500 m of forest edges, some fires occurred in deep forest, several kilometers from any edge. The obvious synergism between forest fragmentation and fire poses serious risks to tropical ecosystems and has important implications for land management.     

Ectomised conductors in the golden orb-web spider, Nephila plumipes (Araneoidea): a male adaptation to sexual conflict?

Male genitalia may facilitate sperm protection by acting as a plug that prevents or hinders future matings. The pedipalps (intromittant organs) of males of the orb-web spider, Nephila plumipes, have a conductor with a peculiarly curved ending and a triangular process near the terminal end. The tip of the conductor, including the process, breaks during most matings and remains inside the female genital tract. We explored the possible function of the conductor as a mating plug using the double-mating sterile-male technique. Our data are not consistent with a plug function because males use only one pedipalp in each mating, thus leaving an unobstructed insemination duct available for future matings; conductors of males mating with virgin females are not more likely to break than those of males mating with mated females, and second males show no preference for used or unused spermathecae. In addition, males that inserted their palp in the insemination duct that contained a tip of the conductor from a previous male obtained a share in the paternity of the female's clutch of eggs. Interestingly, the conductor is more likely to break if it is inserted in an unused spermatheca. We argue that several lines of evidence suggest that the conductor breaks as a result of intersexual conflict over the duration of copulation.     

High-frequency measurements reveal spatial and temporal patterns of dissolved organic matter in an urban water conveyance

Stormwater runoff in urban areas can contribute high concentrations of dissolved organic matter (DOM) to receiving waters, potentially causing impairment to the aquatic ecosystem of urban streams and downstream water bodies. Compositional changes in DOM due to storm events in forested, agricultural, and urban landscapes have been well studied, but in situ sensors have not been widely applied to monitor stormwater contributions in urbanized areas, leaving the spatial and temporal characteristics of DOM within these systems poorly understood. We deployed fluorescent DOM (FDOM) sensors at upstream and downstream locations within a study reach to characterize the spatial and temporal changes in DOM quantity and sources within an urban water conveyance that receives stormwater runoff. Baseflow FDOM decreased over the summer season as seasonal flows upstream transported less DOM. FDOM fluctuated diurnally, the amplitude of which also declined as the summer season progressed. During storms, FDOM concentrations were rapidly elevated to values orders of magnitude greater than baseflow measurements, with greater concentrations at the downstream monitoring site, revealing high contributions from stormwater outfalls between the two locations. Observations from custom, in situ fluorometers resembled results obtained using laboratory methods for identifying DOM source material and indicated that DOM transitioned to a more microbially derived composition as the summer season progressed, while stormwater contributions contributed DOM from terrestrial sources. Deployment of a mobile sensing platform during varying flow conditions captured spatial changes in DOM concentration and composition and revealed contributions of DOM from outfalls during stormflows that would have otherwise been unobserved.     

Study of electromagnetic radiation pollution in an Indian city

Electromagnetic radiation emitted by cell phone towers is a form of environmental pollution and is a new health hazard, especially to children and patients. The present studies were taken to estimate the microwave/RF pollution by measuring radiation power densities near schools and hospitals of Chandigarh city in India. The cell phone radiations were measured using a handheld portable power density meter TES 593 and specific absorption rates were estimated from the measured values. These values of electromagnetic radiation in the environment were compared with the levels at which biological system of humans and animals starts getting affected. The values were also compared with the international exposure limits set by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). The highest measured power density was 11.48?mW/m(2) which is 1,148% of the biological limit. The results indicated that the exposure levels in the city were below the ICNIRP limit, but much above the biological limit.     

A new method for municipal solid waste incinerator (MSWI) fly ash inertization, based on colloidal silica

Municipal solid waste incineration (MSWI) is a straightforward way to manage waste, however the disposal of process byproducts, mainly bottom and fly ash, is still a problem, because of their hazardous contents. Fly ash is a byproduct of many other processes that involve combustion to produce energy. In this paper we present and discuss a new method for MSWI fly ash inertization, mainly based on the use of colloidal silica as a stabilization agent for metals. In the patented procedure, fly ash of different provenance can be used to produce an inert and non-hazardous material, that can be reused. In fact to make the recovery process more efficient, landfilling should be totally avoided. For this reason, to enhance the possibility of reuse, a washing process, for salts recovery, is proposed as a final step of the inertization procedure. The obtained inert material is called COSMOS (COlloidal Silica Medium to Obtain Safe inert), and it is composed of calcium carbonate, calcium sulfate, silicon oxide and a wide quantity of non-soluble amorphous compounds. COSMOS does not contain any corrosive salts. This makes it extremely interesting for cement industry applications with several other advantages, and environmental benefits. The new proposed inertization procedure appears very promising, because it allows MSWI fly ash to be considered a valuable resource. Thanks to the obtained results, a demonstration project, in the frame of LIFE+, has been funded by the European Commission (LIFE+ 2008 project ENV/IT/000434, ).     

Some considerations on the use of simple box models of contaminant fate in soils

A simple box model computing time-averaged concentrations in soil and water of contaminants such as pesticides, following a pulse emission under the assumption of constant removal rates, is presented and evaluated against a benchmark model and some lysimeter experiments representative of different soil and climate settings in Europe. The simple box model allows capturing to some extent the trends of contaminant releases observed from lysimeters or predicted by the benchmark model. This suggests that the correct order of magnitude of environmental concentrations and loads of contaminants can be described as a first approximation by a very simple back-of-the-envelope calculation. In the calculation, the time lag between contaminant application and the start of runoff or leaching should be considered. In the absence of more detailed information, repeating the calculation for the extreme cases of zero and one month lag yields a reasonably realistic range, and the geometric mean of the two is suggested as a first guess estimate. This configures a practical approach for the screening of contaminant losses especially suited for the mapping of predicted environmental concentrations (PECs) for assessment at broad scale (such as continental Europe, a country or a large catchment), where contingent determinants of contaminant fate tend to be averaged out and use of more detailed models usually promises to yield little improvement of PECs.     

Metal concentrations in used engine oils: Relevance to site assessments of soils

Used engine oils contain metals, which upon entering soils may pose risks to human health or the environment. In this study, previously published concentrations of 23 metals in 213 used engine oil samples from the early 1970s to the mid-1990s are statistically evaluated. Neat (100%) used engine oils were found to contain relatively high concentrations of lead, calcium, and zinc, attributable to piston blow-by of leaded gasoline, calcium salt detergent additives, and zinc-bearing anti-corrosion/anti-oxidation additives, respectively. Wear metal concentrations were lower. The lead concentration in used engine oils in the U.S. declined between the 1970s and early 1990s, potentially providing a basis to constrain the “age” of used engine oil(s) in soils. The concentrations of 23 metals in used engine oils were compared to soil risk benchmarks in 15 representative jurisdictions in the U.S., Canada, Australia, and Europe. The maximum concentrations in neat (100%) used engine oil of eight metals – Be, Co, Fe, Mn, Ni, Se, Ag, and Ti – were lower than their collective minimum benchmarks in soils for the jurisdictions surveyed, indicating their concentrations in soils could not be reasonably expected to exceed any soil benchmarks. Nine metals (As, Ba, Cd, Cr, Cu, Pb, Sn, V and Zn), but particularly arsenic, cadmium, lead, tin, and zinc, were identified as potential contaminants of concern (PCOC) for soils from locations impacted with used engine oils, owing to their higher median concentrations (i.e., 2.5, 1.4, 1038, 5.0, and 922 mg/kg in oil, respectively) relative to most soil benchmarks. Site-specific benchmarks and metal concentrations at reasonable oil in soil concentrations require consideration when developing the suite of PCOC metal analytes for conducting site assessments of soils impacted by used engine oil.