Influence of usage and chemical–physical properties on the atmospheric transport and deposition of pesticides to agricultural regions of Manitoba,Canada

This study quantified the masses of 14 pesticides deposited as wet (precipitation) versus dry (gaseous and particle) atmospheric deposition at a research farm in southwestern Manitoba, Canada. The concentration in air of these pesticides was also measured. Total bulk deposition amounts (wet + dry) ranged from 0.009 to 2.3 μg m^?2 for the 12 pesticides detected, and for the six pesticides with both wet and dry deposition detections, dry deposition contributed 12–51% of the total deposition over the crop growing season. Although not applied at the site, eight herbicides registered for use in Canada, as well as lindane (γ-HCH), were all frequently detected (92–100%) in the 12 air samples analyzed during the crop growing season, with by-product isomer α-HCH (75%), clopyralid (50%) and atrazine (8%) detected to a lesser extent. The chemical’s physicochemical properties and the relative mean mass of each agricultural pesticide applied in the province of Manitoba and in a 13 km radius were significant parameters in explaining the trends in the concentrations of pesticides detected in our samples. The important contribution of dry deposition to total pesticide deposition warrants greater attention in arid and semi-arid areas such as the Prairie Region of Canada, also because under a changing climate this region is estimated to experience more severe droughts while the more favorable conditions predicted for pest infestations could lead to increased pesticide applications in agricultural and urban areas.     

A Fuel-Based Assessment of Off-Road Diesel Engine Emissions

ABSTRACT

The use of diesel engines in off-road applications is a significant source of nitrogen oxides (NO_x) and particulate matter (PM₁₀). Such off-road applications include railroad locomotives, marine vessels, and equipment used for agriculture, construction, logging, and mining. Emissions from these sources are only beginning to be controlled. Due to the large number of these engines and their wide range of applications, total activity and emissions from these sources are uncertain. A method for estimating the emissions from off-road diesel engines based on the quantity of diesel fuel consumed is presented. Emission factors are normalized by fuel consumption, and total activity is estimated by the total fuel consumed.

Total exhaust emissions from off-road diesel equipment (excluding locomotives and marine vessels) in the United States during 1996 have been estimated to be 1.2 × 10⁹ kg NO_x and 1.2 x 10⁸ kg PM₁₀. Emissions estimates published by the U.S. Environmental Protection Agency are 2.3 times higher for both NO_x and exhaust PM₁₀ emissions than estimates based directly on fuel consumption. These emissions estimates disagree mainly due to differences in activity estimates, rather than to differences in the emission factors. All current emission inventories for off-road engines are uncertain because of the limited in-use emissions testing that has been performed on these engines. Regional- and state-level breakdowns in diesel fuel consumption by off-road mobile sources are also presented. Taken together with on-road measurements of diesel engine emissions, results of this study suggest that in 1996, off-road diesel equipment (including     

An updated state of the science EQC model for evaluating chemical fate in the environment: application to D5 (decamethylcyclopentasiloxane)

The EQuilibrium Criterion (EQC) model developed and published in 1996 has been widely used for screening level evaluations of the multimedia, fugacity-based environmental fate of organic chemicals for educational, industrial, and regulatory purposes. Advances in the science of chemical partitioning and reactivity and the need for more rigorous regulatory evaluations have resulted in a need to update the model. The New EQC model is described which includes an improved treatment of input partitioning and reactivity data, temperature dependence and an easier sensitivity and uncertainty analysis but uses the same multi-level approach, equations and environmental parameters as in the original version. A narrative output is also produced. The New EQC model, which uses a Microsoft Excel platform, is described and applied in detail to decamethylcyclopentasiloxane (D5; CAS No. 541-02-6). The implications of these results for the more detailed exposure and risk assessment of D5 are discussed. The need for rigorous evaluation and documentation of the input parameters is outlined.     

Why Economics Matters for Endangered Species Protection

Abstract: We offer three reasons why economics matters more to species protection than many people think and what this implies for the ongoing debate over the reauthorization of the Endangered Species Act of 1973. Economics matters because (1) human behavior generally, and economic parameters in particular, help determine the degree of risk to a species; (2) in a world of scarce resources, the opportunity cost of species protection—the costs of reduced resources for other worthwhile causes—must be taken into account in decision making; and (3) economic incentives are critical in shaping human behavior, and consequently the recovery of species. Endangered species protection that explicitly addresses these basic principles can avoid wasting valuable resources that yield no gain in species protection.     

大连湾污染排放总量控制研究：海湾纳污能力计算模型

基于质量守恒原理和线性迭加原理，导出了受纳水域对污染源的响应关系，建立了海域污染总量控制的计算模式，计算了大连湾的容许入海负荷总量，各排污口的污染分担率和削减率，为大连湾污染源治理提供了科学依据。     

Effects of biodegradation and sorption by humic acid on the estrogenicity of 17β-estradiol

The removal of 17β-estradiol (E2) by biodegradation and sorption onto humic acid (HA) was examined at various HA concentrations. Subsequently, estrogenicity associated with E2 removal was estimated using E-screen bioassay. Results showed that E2 biodegradation and its subsequent transformation to estrone (E1) were significantly reduced with increasing HA concentration. In addition, the presence of nutrients enhanced the biodegradation of E2. Overall, E2 biodegradation was the dominating contributor to its removal, which demonstrated a significantly negative correlation with E2 sorption at various HA concentrations. The sorption of E2 by HA was significantly enhanced with increasing HA concentration. Estrogenicity associated with residual E2 showed that there existed a significant difference among various HA concentrations, with the lowest value in the absence of HA. The findings suggest that the presence of HA and nutrients in natural waters should be considered in assessing estrogenicity of environmental samples due to complex sorption and biodegradation processes.     

Hydrocarbon Production and Photochemical Ozone Formation in Forest Burn Plumes

The purpose of this paper is to describe ozone production in forest slash burn plumes. Plumes from controlled fires in the state of Washington were monitored using an instrumented aircraft. Ozone, oxides of nitrogen, condensation nuclei, and visual range (nephelometer) were measured continuously on board the plane. Airborne grab samples were collected for detailed hydrocarbon analysis.

The slash burn plumes were found to contain significant quantities of ozone. A buildup of 40–50 ppb above the ambient background ozone concentrations was not unusual. Hydrocarbon analyses revealed the presence of many photochemically reactive olefins in the plume. Hydrocarbon/NO _x ratios were favorable for photochemical oxidant production.     

PFOS and PFC releases and associated pollution from a PFC production plant in Minnesota (USA)

Perfluorooctane sulfonate (PFOS) and PFOS-related substances have been listed as persistent organic pollutants in the Stockholm Convention. From August 2012, Parties to the Convention needed to address the use, storage, and disposal of PFOS—including production sites and sites where PFOS wastes have been deposited—in their national implementation plans. The paper describes the pollution in Minnesota (USA) caused by the 3M Company at one of the largest per/polyfluorinated chemical (PFC) production facilities. From early 1950s until the end of 2002, when 3M terminated PFOS and perfluorooctanoic acid (PFOA) production, PFOS, PFOA, and other PFC production wastes were disposed around the plant and in local disposal sites. Discharges from the site and releases from deposits caused widespread contamination of ground and surface waters including local drinking water wells. Fish in the river downstream were contaminated with PFOS to levels that led to fish consumption advisories. Human exposures resulted from ingesting contaminated drinking water, requiring installation of water treatment facilities and alternate water supplies. The critical evaluation of the assessments done revealed a range of gaps in particular of human exposure where relevant exposure pathways including the entire exposure via food have not been taken into consideration. Currently, the exposure assessment of vulnerable groups such as children or Hmong minorities is inadequate and needs to be improved/validated by epidemiological studies. The assessment methodology described for this site may serve—with highlighted improvements—as a model for assessment of other PFOS/PFC production sites in the Stockholm Convention implementation.     

Evaluation of the methyl ester O-methyl acetate derivative of muramic acid for the determination of peptidoglycan in environmental samples by ion-trap GC-MS-MS

Muramic acid (MA) is a unique amino sugar that is a constituent of the peptidoglycan (PG) present in prokaryotic cell walls. MA can serve as a marker for quantifying bacterial load, e.g. in indoor environments, by using gas chromatography-tandem mass spectrometry (GC-MS-MS). We demonstrated recently that the methyl ester O-methyl acetate (MMA) derivative can be used to detect MA in house dust by ion-trap GC-MS-MS. However, since the MMA derivative is not formed from free MA quantification was not optimal. Here we report 1) significant improvements in sample preparation of the MMA derivative and 2) an evaluation of the performance of derivative, using for comparison the alditol acetate derivative, the gold standard in quantitative trace analysis of MA in complex matrices. The MMA derivative was analysed using an MS instrument with internal ionization and the alditol acetate derivative was analysed using an instrument with external ionization. 13C-labelled cyanobacteria, containing MA in their PG, were used as the internal standard. A linear relationship was found between the two methods in studies on 27 parallel samples of airborne dust from school classes collected on filters. Although the analytical sensitivity of the MMA derivatives was somewhat slightly lower than of the alditol acetate derivative, this may be due to differences in yield of derivative, sample clean-up efficiency, or different performance of the GC columns or MS instruments. However preparation of the MMA derivative is quick and compatible with preparation of methyl esters of 3-hydroxy fatty acids (used as markers of Gram negative endotoxin) allowing the levels of both markers to be determined in the same dust sample. In conclusion, the MMA procedure can be used to determine MA in environmental samples with good reproducibility provided the concentration of the 13C-labelled MA internal standard in the cyanobacteria is first determined with an alternative method.     

Assessment of Benthic Infaunal Condition on the Mainland Shelf of Southern California

Benthic infauna were sampled from 251 Southern California Bight (SCB) mainland shelf sites in the summer of 1994. Sample sites were selected using a stratified random design, with the primary strata being depth zone, geography, and proximity to point and non-point discharges. Benthic infaunal condition was assessed using the Benthic Response Index (BRI), and by comparing dominant taxa and community parameters (e.g., number of taxa) among strata. Ninety-one percent of sediments in the SCB were found to contain healthy benthic communities. Most stations with altered benthos were located near river mouths, in Santa Monica Bay, or on the Palos Verdes Shelf. Deviations at sites with altered benthic communities were mostly limited to minor changes in species composition, rather than to large declines in diversity or abundance.