Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70–75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

     

Continued decline of an Atlantic cod population: how important is gray seal predation?

The continental shelf ecosystem on the Eastern Scotian Shelf (ESS) has experienced drastic changes. Once common top predators are a small fraction of their historical abundance, and much of the current community structure is now dominated by pelagic fishes and invertebrates. Embedded within this food web, Atlantic cod and gray seal populations have recently exhibited nearly opposite trends. Since 1984, cod populations have decreased exponentially at a rate averaging 17% per year, whereas gray seals have continued to increase exponentially at a rate of 12%. We reexamined the impact of gray seals on Atlantic cod dynamics using more than 30 years of data on the population trends of cod and gray seals while incorporating new information on seal diet and seasonal distribution. The closure of the cod fishery over 10 years ago allowed for a better estimation of natural mortality rates. We quantified the impact of seals on ESS cod by (1) estimating trends in seal and cod abundance, (2) estimating the total energy needed for seal growth and maintenance from an energetics model, (3) using estimates of the percentage of cod in the total diet derived from quantitative fatty acid signature analysis (QFASA) and of the size-specific selectivity of cod consumed (derived from otoliths collected from fecal samples), and (4) assuming a gray seal functional response. Uncertainties of the model estimates were calculated using the Hessian approximation of the variance-covariance matrix. Between 1993 and 2000, cod comprised, on average, < 5% of a gray seal's diet. Our model shows that, since the closure of the fishery, gray seals have imposed a significant level of instantaneous mortality (0.21), and along with other unknown sources of natural mortality (0.62), are contributing to the failure of this cod stock to recover.     

A case for 2-body material removal in prime LED sapphire substrate lapping and polishing

An alternative, and potentially better, means to process prime LED sapphire wafers is proposed. A brief history of material removal mechanisms suggests that brittle materials can be abraded in a ductile regime and that this can be a superior mode of removal. Advantages in material removal rate, surface finish and subsurface damage for a 2-body ductile removal of sapphire are shown relative to 3-body material removal. A major difficulty with this approach may be getting the LED manufacturing industry to understand that the appearance of the sapphire surface is quite different, unfamiliar yet predictable. Finally, some potential alternative process approaches are discussed that utilize 2-body material removal.     

Why do snakes have eyes? The (non-)effect of blindness in island tiger snakes (Notechis scutatus)

Large (to >1 m), diurnally active tiger snakes (Notechis scutatus) are abundant on Carnac Island, near the coast of Western Australia. Our behavioural and mark-recapture studies provide the first ecological data on this population, and reveal a surprising phenomenon. Many adult tiger snakes have had their eyes destroyed, apparently during nest defence, by silver gulls (Larus novaehollandiae). This loss of vision did not reduce the snakes' body condition (mass relative to length), or their rates of growth or survival (measured over a 12-month period). Blind male snakes trail-followed females, and mated successfully. Thus, destruction of a major sensory modality had no detectable effect on these predators. This result is strongly counter-intuitive, but mirrors an earlier report of congenital blindness (without ill-effects) in American viperid snakes. Similarities between the two systems (island populations, highly venomous snakes, reliance on sessile prey) clarify the circumstances under which the loss of vision does not reduce an organism's viability. These natural experiments support Gans' hypothesis of “momentarily excessive construction” in that the snakes possess a complex organ system that they do not actually require for successful feeding, survival or reproduction. Received: 30 November 1998 / Received in revised form: 24 April 1999 / Accepted: 9 May 1999     

Environmental performance and practice across sectors: methodology and preliminary results

This paper introduces a new methodology for measuring and modeling manufacturers’ environmental performance and the managerial and technological practices that affect it. Facility level licensing data are used to develop indicators based on sector-specific criteria but capable of being analyzed across sectors, at various levels of aggregation. This addresses the problem that environmental performance and determinants tend to be highly context-specific, while modeling and policy interests are often more general. Using Integrated Pollution Control (IPC) information generated EU-wide, this approach should be capable of cross-country extension. The methodology is tested on a sample of Irish facilities in three sectors during 1996–2004. Preliminary results show its usefulness in exploring the determinants of environmental performance at the sector and cross sector levels. Word count = 10,049.     

Low levels of persistent organic pollutants (POPs) in New Zealand eels reflect isolation from atmospheric sources

Polychlorinated biphenyls (PCBs) and organic pesticides (i.e., DDTs) were measured in long finned eels (Anguilla dieffenbachii) in 17 streams on the west coast of South Island, New Zealand. Very low levels of PCBs and low levels of ppDDE were found. The concentrations of PCBs and ppDDE were not correlated within sites indicating that different processes determined the levels of the two pollutants in New Zealand eels. The PCBs probably originate from atmospheric transport, ppDDE levels are determined by land use and are higher in agriculture areas. The low contamination level of these aquatic systems seems to be a function of a low input from both long and short-range transport as well as few local point sources. No correlation could be found between lipid content and persistent organic pollutants (POPs) concentration (as shown in previous studies) in the eels which could be explained by low and irregular intake of the pollutants.     

Combined toxicity of copper and phenol derivatives to Daphnia magna: effect of complexation reaction

The complexation of Cu with phenol was investigated in aqueous solution to find the changes in toxicity toward Daphnia magna in mixtures of copper and phenol derivatives and determine an appropriate prediction model for the toxicity of these mixtures. In the titration experiment, the results showed that phenol played an important role in the remarkable reduction of the Cu(2+) concentration, due to its complexation with Cu, with the subsequent reduction in the toxicity of aqueous mixtures containing both Cu and phenol. As a result, it was clearly demonstrated that Cu-phenol formed a non-toxic complex toward D. magna as the mortality declined, despite the addition of phenol to a fixed Cu concentration. Meanwhile, prediction of the combined toxicity for binary mixtures of Cu and 11 phenol derivatives more accurately followed an independent action model (p = 0.143, df = 124, and t = -1.475 in t-test) than an effect summation model (p approximately 0, df = 134, and t = 7.528 in t-test) due to the dissimilar modes of action and the complexation reactions between Cu and each of the phenolic compounds. Consequently, this study supports the importance of considering complexation reactions in assessing the combined toxicity for the formulation of water quality in mixtures of heavy metals and organic compounds, and in these cases, an independent action model was found to be appropriate.     

Mass balance modelling of contaminants in river basins: a flexible matrix approach

A novel and flexible approach is described for simulating the behaviour of chemicals in river basins. A number (n) of river reaches are defined and their connectivity is described by entries in an n x n matrix. Changes in segmentation can be readily accommodated by altering the matrix entries, without the need for model revision. Two models are described. The simpler QMX-R model only considers advection and an overall loss due to the combined processes of volatilization, net transfer to sediment and degradation. The rate constant for the overall loss is derived from fugacity calculations for a single segment system. The more rigorous QMX-F model performs fugacity calculations for each segment and explicitly includes the processes of advection, evaporation, water-sediment exchange and degradation in both water and sediment. In this way chemical exposure in all compartments (including equilibrium concentrations in biota) can be estimated. Both models are designed to serve as intermediate-complexity exposure assessment tools for river basins with relatively low data requirements. By considering the spatially explicit nature of emission sources and the changes in concentration which occur with transport in the channel system, the approach offers significant advantages over simple one-segment simulations while being more readily applicable than more sophisticated, highly segmented, GIS-based models.     

Corporate waste accounting at PSE&G: Bringing a companywide system on-line

Waste accounting has become a necessary practice for companies endeavoring to track their wastes toward realizing discrete waste minimization and pollution prevention objectives. Measurement systems and program initiatives certainly must be tested to find out what will repeatedly work for and best serve a company. Public Service Electric and Gas Company (PSE&G) has committed to revolutionizing the processes of managing materials, wastes, and their associated information. In laying out their strategic plan, company representatives specified the need for a companywide waste accounting system to enable them to monitor progress toward achieving two important short-term waste management targets by the close of 1995. Together with the Electric Power Research Institute, PSE&G is implementing a four-year program to install such a system. The results of the first year-and-a-half's work are reported in this article. The purpose of this article is to discuss the results of implementing a waste accounting system on a utility companywide basis. We will address the experience of bringing such a system on-line at PSE&G. The Electric Power Research Institute (EPRI) previously developed a framework and approach for measuring the performance of utility pollution prevention programs called waste accounting, including the development of a software program called Accounting Software Application for Pollution Prevention or ASAPP.¹ These programs were devised to assimilate detailed information from the facility up through the corporate levels.