Closing the carbon cycle through rational use of carbon-based fuels

In this paper, a brief overview is presented of natural gas as a fuel resource with subsequent carbon capture and re-use as a means to facilitate reduction and eventual elimination of man-made carbon emissions. A particular focus is shale gas and, to a lesser extent, methane hydrates, with the former believed to provide the most reasonable alternative as a transitional fuel toward a low-carbon future. An emphasis is placed on the gradual elimination of fossil resource usage as a fuel over the coming 35 to 85 years and its eventual replacement with renewable resources and nuclear power. Furthermore, it is proposed that synthesis of chemical feedstocks from recycled carbon dioxide and hydrogen-rich materials should be undertaken for specific applications in the transport sector which require access to high energy density fuels. To achieve the latter, carbon dioxide capture is imperative and possible synthetic routes for chemical feedstock production are briefly reviewed.     

Determination of 2,4-dichlorophenoxyacetic acid (2,4-D) in human urine with mass selective detection.

Method development and validation studies have been completed on an assay that will allow the determination of 2,4-dichlorophenoxyacetic acid (2,4-D) in human urine. The accurate determination of 2,4-D in urine is an important factor in monitoring worker and population exposure. These studies successfully validated a method for the detection of 2,4-D in urine at a limit of quantitation (LOQ) of 5.00 ppb (parts per billion) using gas chromatography with mass selective detection (GC/MSD). The first study involved the determination of 2,4-D in control human urine and urine samples fortified with 2,4-D. Due to chromatographic interference, a second study was conducted using 14C-2,4-D to verify the recoverability of 2,4-D from human urine at low levels using the GC/MSD method. The second study supports the results of the original data. The 2,4-D was extracted from human urine using a procedure involving hydrolysis using potassium hydroxide, followed by a liquid-liquid extraction into methylene chloride. The extracted samples were derivatized with diazomethane. The methylated fraction was analyzed by GC/MSD. Quantitation was made by comparison to methylated reference standards of 2,4-D. Aliquots fortified at 5-, 50-, and 500-ppb levels were analyzed. The overall mean recovery for all fortified samples was 90.3% with a relative standard deviation of 14.31%.     

CASING AND LEAK DEPTHS,AND SOLUTE TRAVEL TIMES TO WELLS1

ABSTRACT: A mathematical solution based on porous media flow is developed for solute travel time to a well as affected by a leak around the upper part of the casing. Consider a well of radius 0.2 meters (m) penetrating, fully, a semiconfined aquifer of thickness 6 m with impermeable casing length of 4.5 m, and screened casing length 1.5 m. Around the upper 1.5 m of the impermeable casing length, there is a highly permeable region (a leak). The radius of influence of the well is 10 m. The porous flow medium has a hydraulic conductivity of 10 m/day and a porosity of 0.25. Between the water table and the water level in the well, there is a steady state pumped down head difference of 0.3 m. Solute travel time from a point at the bottom of the leak to the well is 2.33 days. If the leak is sealed (grouted), the travel time is 6.24 days. Examples of six different geometries are given. Laboratory studies verify the theory. The computations should be useful in the design and protection of water wells from solutes, such as from agriculture, industry, strip mines, or sanitary landfills.     

Photometrische Bestimmung der Zytotoxizität von Chemikalien

Two test methods are presented to assess the cytotoxicity of chemicals. On one hand the protozoonTetrahymena pyriformis and on the other the bacteriumPseudomonas aeruginosa is cultured in defined media containing the test chemicals. Test parameter is the quantity of living cells surviving exposure. The conversion of the tetrazolium salt MTT into formazan is equivalent to cell viability. A mixture of detergent and isopropanol is used to dissolve the blue formazan which is not soluble in water, prior to photometric measurement. For cetyltrimethylammonium bromide, benzyldimethyldodecylammonium chloride, dodecylbenzenesulfonic acid sodium salt, potassium dichromate, 4-toluenesulfonic acid sodium salt, and 4-nitrophenol the EC50-values (mol/l) in theTetrahymena pyriformis- (Pseudomonas aeruginosa) test system were: 10^?5,81 (10^?5,08); 10^?4,68) (10^?3,80; 10^?4,50 (10^?4,14); 10^?3,97 (10^?5,11); 10^?2,71 (10^?2,50) and 10^?4,00 (10^?3,64). — With the assays described here it is possible to measure a large number of samples by quick and simple means.     

Smart Growth and Sustainable Development: challenges, solutions and policy directions

In this paper, we focus on the issues related to development densities that emerged from our study of sprawl and development issues in three regions of British Columbia, Canada. We chose to focus on this aspect of the Smart Growth agenda because, while many of its other elements enjoy wide support across social interests, the goal of achieving a higher density urban fabric is highly controversial. We proceeded by collecting data on development densities and 13 indicators of community sustainability in 26 municipalities. The results suggest that the density of communities is associated with efficiencies in infrastructure and with reduced automobile dependence, with the ecological and economic implications which flow from that. However, it does not necessarily correlate with greater affordability of housing or more access to green space. In fact, if anything, we discovered a negative relationship between housing affordability and green space per capita and higher land-use densities. In a second stage of the research, we conducted a qualitative analysis of a subset of six municipalities and identified key policy issues for moving ahead with the Smart Growth agenda. The paper concludes with a discussion of the policy issues that emerged from these case studies.     

Long-term effects of lead poisoning on bone mineralization in vultures exposed to ammunition sources

Long-lived species are particularly susceptible to bioaccumulation of lead in bone tissues. In this paper we gain insights into the sublethal effects of lead contamination on Egyptian vultures (Neophron percnopterus). Our approach was done on the comparison of two populations (Canary Islands and Iberian Peninsula) differing in exposures to the ingestion of lead ammunition. Blood lead levels were higher in the island population (Canary Islands range: 5.10-1780 μg L⁻¹n = 137; Iberian Peninsula range: 5.60-217.30 μg L⁻¹n = 32) showing clear seasonal trends, peaking during the hunting season. Moreover, males were more susceptible to lead accumulation than females. Bone lead concentration increased with age, reflecting a bioaccumulation effect. The bone composition was significatively altered by this contaminant: the mineralization degree decreased as lead concentration levels increased. These results demonstrate the existence of long-term effects of lead poisoning, which may be of importance in the declines of threatened populations of long-lived species exposed to this contaminant.     

Whole Effluent Toxicity (WET) Tests on Wastewater Treatment Plants with Daphnia magna and Selenastrum capricornutum

Whole effluent toxicity (WET) tests, with Daphnia magna and Selenastrum capricornutum, were introduced to evaluate the biological toxicities of effluents from the wastewater treatment plants (WWTPs) in Korea. In WET tests of WWTPs effluents, 33.3% (33/99) for D. magna and 92.6% (75/81) for S. capricornutum revealed greater than 1 toxic unit (TU), even though all the treatment plants investigated were operating in compliance with the regulations, as assessed using conventional monitoring methods (i.e., BOD and total concentration of N or P, etc). There were only minor differences in toxicities according to the types of influents (municipal and agro-industrial) in all treatment plants. However, the effluents treated by an activated sludge treatment process were found to exhibit significantly lower toxicity than those treated by rotating biological contactor (RBC) and extended aeration processes. The seasonal variations in the toxicity were lower in the summer compared to winter, which may have been due to the rainfall received to the sewage intake system during the former period. The impact of WET on river water was also investigated based on the discharge volume. At sites A and B, the total impact of toxicity to stream and river waters was observed to be 70.9% and 90.4% for D. magna and S. capricornutum, respectively. The other four small treatment plants (sites F, G, H and I), with relative discharging volumes between 0.001 and 0.002, contribute less than 1% to the total toxicity.     

Mass balance modelling of contaminants in river basins: application of the flexible matrix approach

It is useful to have available a variety of catchment-scale water quality models that range in complexity, spatial resolution and data requirements. In a previous paper [Warren, C., Mackay, D., Whelan, M., Fox, K., 2005. Mass balance modelling of contaminants in river basins: a flexible matrix approach. Chemosphere 61, 1458-1467] a series of simple to intermediately complex mass balance models was presented which can be used for tiered exposure assessments in river basins. The connectivity of the segments is expressed using a matrix that permits flexibility in application, enabling the model to be re-segmented and applied to different catchments as required. In this paper, the intermediate models, QWASI matrix-rate constant (QMX-R) and QWASI matrix-fugacity (QMX-F) are used to estimate concentrations of linear alkylbenzene sulfonates (LAS) in the rivers Aire and Calder, UK, and of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) in the Fraser River basin, Canada. The results compare satisfactorily with monitoring data, suggesting that these QWASI-based models for exposure and risk assessment may be applicable under data-limited conditions. The use of QWASI-based models for regulatory purposes in an evaluative river system is also discussed with reference to assessments of para-dichlorobenzene (pDCB), trichloroethylene (TCE), bis(2-ethylhexyl) phthalate (DEHP) and toluene. It is shown that multi-media QWASI model predictions can be usefully depicted graphically on chemical space diagrams and used to highlight regions in which advection, partitioning to sediments and volatilization may be important determinants of chemical fate in river systems.     

Equivalent leak definitions for Smart LDAR (leak detection and repair) when using optical imaging technology

Controlling fugitive emissions from leaks in petrochemical industry process equipment now requires periodic monitoring of valves, flanges, pumps etc., typically on a quarterly basis. Previous studies have shown that over 90% of the reducible emissions come from approximately 0.1% of the components, i.e. the large leakers. A new, and more cost-effective approach for controlling these large leakers would entail more frequent monitoring of process equipment, allowing for the detection and repair of the highly leaking components that contribute the most to emissions. This approach has been called "Smart LDAR." New optical imaging instruments, which significantly reduce monitoring costs, are now available to implement such an alternative work practice. This work describes the determination of the leak detection sensitivity (equivalency threshold) that an optical imaging instrument must achieve to ensure that it will provide at least the equivalent emission control of the current leak detection and repair practice. Equivalency thresholds were developed for various monitoring intervals. The U.S. Environment Protection Agency's Monte Carlo simulation approach was used to perform the analysis and to demonstrate that optical imaging, which is capable of identifying all of the largest leakers, can provide better control of fugitive emissions.