The role and expectancy participation model: An empirical assessement and extension

Four hypotheses were investigated. The results substantially support and extend the usefulness of Schuler's role and expectancy participation model (1980). Schuler's model posits that participation intervenes to attenuate the relationships between job objectives and role conflicts and ambiguity. Also, participation, role conflict and role ambiguity are assumed to intervene to attenuate the relationships between job objectives and job satisfaction. The four hypotheses were tested using a sample of 187 retail store managers. Results revealed that job objectives were related to the role variables and satisfaction. Participation significantly attenuated the job objectives, role conflict and job satisfaction relationships. Implications for the use of the attributes of job objectives approach to integrate other objective setting paradigms are discussed.     

BASIN WATER MONITORING: HYDROLOGIC IMPACT OR LEGAL COMPLIANCE1

ABSTRACT: The Surface Mining Control and Reclamation Act of 1977 (PL 95–87) requires data collection prior to mining which will allow a determination to be made of the probable hydrologic consequences. Modeling strategies exist which allow for such determination, but selection of a specific model form will dictate the length of data record needed. The absence of a sound management strategy by the regulatory authority in‘Maryland does not result in valid data collection and suggests that the agency is concerned more with legal compliance than with integrated resource management.     

Field dissipation of acetochlor in two New Zealand soils at two application rates

The persistence of pesticides in soils has both economic and environmental significance and is often used as a key parameter in pesticide risk assessment. Persistence of acetochlor [2'-ethyl-6'-methyl-N-(ethoxymethyl)-2-chloroacetylanilide] in two New Zealand field soils was measured over two years and the data were used to identify models that adequately describe acetochlor persistence in the field. Acetochlor was sprayed onto six fallow plots (3 x 9 m each) at each site at the recommended rate (2.5 kg a.i. ha(-1)) and at twice that rate. Acetochlor concentrations were measured in soil cores. Simple first-order kinetics (Model 1) adequately described acetochlor persistence in Hamilton clay loam soil (Humic Hapludull, Illuvial Spadic) at the high application rate, but overestimated it at the low application rate. A quadratic model (Model 2), a first-order double-exponential model (Model 3), a first-order biphasic model (Model 4), or a two-compartment model (Model 5) better described acetochlor persistence at the low application rate. The time for 50% (DT50) and 90% (DT90) of initial acetochlor loss was approximately 9 and 56 d, and 18 and 63 d at low and high application rates, respectively. The more complex Models 2 through 5 also better described the biphasic dissipation of acetochlor in Horotiu sandy loam soil (Typic Orthic Allophanic) than Model 1, with Model 1 significantly underestimating acetochlor concentrations on the day of application at both application rates. The DT50 and DT90 values were 5 and 29 d and 7 and 31 d at low and high application rates, respectively. Overall, application rate significantly affected the DT50 and DT90 values in the Hamilton soil, but not in the Horotiu soil. Faster acetochlor loss in the Horotiu soil possibly resulted from the higher soil organic carbon content that retained more acetochlor near the soil surface where higher temperature and photolysis accelerated the loss.     

Odor and gas release from anaerobic treatment lagoons for swine manure

Odor and gas release from anaerobic lagoons for treating swine waste affect air quality in neighboring communities but rates of release are not well documented. A buoyant convective flux chamber (BCFC) was used to determine the effect of lagoon loading rate on measured odor and gas releases from two primary lagoons at a simulated wind speed of 1.0 m s(-1). Concentrations of ammonia (NH3), hydrogen sulfide (H2S), carbon dioxide (CO2), sulfur dioxide (SO2), and nitric oxide (NO) in 50-L air samples were measured. A panel of human subjects, whose sensitivity was verified with a certified reference odorant, evaluated odor concentration, intensity, and hedonic tone. Geometric mean odor concentrations of BCFC inlet and outlet samples and of downwind berm samples were 168 +/- 44 (mean +/- 95% confidence interval), 262 +/- 60, and 114 +/- 38 OU(E) m(-3) (OU(E), European odor unit, equivalent to 123 microg n-butanol), respectively. The overall geometric mean odor release was 2.3 +/- 1.5 OU(E) s(-1) m(-2) (1.5 +/- 0.9 OU s(-1) m(-2)). The live mass specific geometric mean odor release was 13.5 OU(E) s(-1) AU(-1) (animal unit = 500 kg live body mass). Overall mean NH3, H2S, CO2 and SO2 releases were 101 +/- 24, 5.7 +/- 2.0, 852 +/- 307, and 0.5 +/- 0.4 microg s(-1) m(-2), respectively. Nitric oxide was not detected. Odor concentrations were directly proportional to H2S and CO2 concentrations and odor intensity, and inversely proportional to hedonic tone and SO2 concentration (P < 0.05). Releases of NH3, H2S, and CO2 were directly proportional (P < 0.05) to volatile solids loading rate (VSLR).     

Dynamics of Ammonia Exchange in Response to Cutting and Fertilising in an Intensively-Managed Grassland

Continuous micrometorological measurements of ammonia (NH₃)exchange were made for a period of 19 months (May 1998–November 1999) over intensively managed grassland in southern Scotland. This study focused on the influence of management activities, such as cutting and fertilising, on vegetation-atmosphere exchange of NH₃. Measurements were conducted within the European project GRAMINAE (GRassland AMmonia INteractions Across Europe) within which the Scottish site forms one of 6 sites in an E–W transect across Europe. NH₃ emissions were enhanced (up to 300 ng m^-2 s^-1) after cutting followed by larger emissions after fertilising (up to 1400 ng m^-2 s^-1). Annual budget calculations show the intensive grassland acted as a net source (1.8 kg N ha^-1 yr¹) although fluxes were bi-directional with deposition dominating in the winter and emission in the summer. Initial modelling of the NH₃ exchange using a `canopy compensation point' model has been conducted for key periods. The dynamics of the fluxes during these key periods, such as before and after cutting and fertilising, may be reproduced by introducing different values of the apoplastic ratio, = [NH₄ ⁺]/[H⁺].     

Long Term Trends in Sulphur and Nitrogen Deposition in Europe and the Cause of Non-linearities

Emissions of sulphur and oxidized nitrogen compounds in Europe have been reduced following a series of control measures during the last two decades. These changes have taken place during a period in which the primary gases and the wet deposition throughout Europe were extensively monitored. Since the end of the 1970s, for example land based sulphur emissions declined by between 90 and 70% depending on the region. Over the same period the total deposition of sulphur and its partitioning into wet and dry deposition have declined, but the spatial pattern in the reduction in deposition differs from that of emission and has changed with time. Such non-linearities in the emission-deposition relationship are important to understand as they complicate the process of assessing the effects of emission reduction strategies. Observed non-linearities in terrestrial sulphur emission-deposition patterns have been identified in north west Europe due to increases in marine emissions, and are currently slowing the recovery of freshwater ecosystems. Changes in the relative amounts of SO₂ and NH₃ in air over the last two decades have also changed the affinity of terrestrial surfaces for SO₂ and have therefore changed the deposition velocity of SO₂ over substantial areas. The consequence of this effect has been the very rapid reduction in ambient SO₂ concentration in some of the major source areas of Europe, where NH₃ did not change much. Interactions between the different pollutants, generating non-linearities are now being incorporated in long-range transport models to simulate the effects of historical emission trends and to provide projections into the future. This paper identifies non-linearities in emission deposition relationships for sulphur and nitrogen compounds in Europe using data from the EMEP long-rang transport model and measured concentration fields of the major ions in precipitation and of SO₂ and NO₂ in surface air.     

Time series in M dimensions: The one-dimensional case: Pollution in the Chicago Sanitary and Ship Canal

A nonstationary time-series model is used to examine the changes occurring at sampling stations on the Chicago Sanitary and Ship Canal. Using data from upstream sampling sites, downstream levels of dissolved oxygen, total dissolved solids, nitrates and nitrites, and ammonia are accurately predicted. The method is simple, insensitive to extreme values, and responsive to changes in the system.     

Using GIS to Generate Spatially Balanced Random Survey Designs for Natural Resource Applications

Sampling of a population is frequently required to understand trends and patterns in natural resource management because financial and time constraints preclude a complete census. A rigorous probability-based survey design specifies where to sample so that inferences from the sample apply to the entire population. Probability survey designs should be used in natural resource and environmental management situations because they provide the mathematical foundation for statistical inference. Development of long-term monitoring designs demand survey designs that achieve statistical rigor and are efficient but remain flexible to inevitable logistical or practical constraints during field data collection. Here we describe an approach to probability-based survey design, called the Reversed Randomized Quadrant-Recursive Raster, based on the concept of spatially balanced sampling and implemented in a geographic information system. This provides environmental managers a practical tool to generate flexible and efficient survey designs for natural resource applications. Factors commonly used to modify sampling intensity, such as categories, gradients, or accessibility, can be readily incorporated into the spatially balanced sample design.