灵泉露天矿残煤回采边坡稳定性分析与评价

为了保证灵泉露天煤矿残煤回采时边坡安全,对其边坡稳定性进行了分析与评价.根据灵泉露天煤矿东帮边坡各剖面实际揭露分层物料各自物理力学性质,应用边坡数值计算软件计算模拟灵泉露天煤矿东帮边坡的稳定性.结果表明,东帮最终帮坡边坡角为32°～35°,能够保证残煤回采时边坡的安全性.同时,对影响灵泉露天煤矿东帮边坡稳定性的主要因素进行了分析评价.结果表明,粉砂岩容易吸水,但含水率的增加对C、φ值的影响幅度小于泥岩,泥岩不易吸水,亦不易排水,但含水率对泥岩的影响幅度大.因此,在采矿过程中应加强露天矿疏干排水工作,以使边坡岩体保持较高强度,从而保证边坡安全.     

危险化学品泄漏扩散模型的研究现状分析与比较

为了对危险化学品港口装卸过程中泄漏危险度进行量化评定,基于泄漏扩散模型提高港口的应急处理技术,对危险化学品泄漏扩散模型的研究现状从理论研究、试验研究、应用研究3方面进行深入分析。着重对高斯模型(Gaussian model),BM模型,Sutton模型,FEM3模型,箱及相似模型,P-G模型等模型从理论描述方法、适用对象和范围、计算精度和难易、参数选取等方面进行优缺点的对比研究,认为:由于危险化学品泄漏和扩散行为的复杂性,影响因素的多样性,使各类模型在具备一定的理论价值和现实意义的同时,还存在着参数选取不确定性、试验模拟差异性以及实际应用局限性的问题和不足,运用计算机技术完善试验结果数据库、改进数学仿真模型是其进一步研究发展的趋势。     

Origin, separation and identification of environmental nanoparticles: a review

The biogeochemical and ecological impacts of environmental nanoparticles (ENPs) are some of the fastest growing areas of research today. However, efficient separation and collection of ENPs in natural systems remains difficult. This review article is focused on experimental investigation of separation and identification of ENPs, including nanoparticles with size fractions in the range of <2000, 450 to 2000, 100 to 450 and 1 to 100 nm. An automated ultrafiltration device (AUD) was used successfully to overcome the problem of efficiently collecting ENPs in large quantities in red soils. A significant amount of hematite nanoparticles was present on the surface coating of kaolinite nanoparticles and aggregated hematite nanoparticles overlapping the edge of a kaolinite flake in a size range of 5 to 8 nm. Synchrotron XRD technique is more straightforward and powerful than conventional XRD with oriented specimens and random powder methods for identifying nanoparticles, crystallinity, and particle size in red soils, particularly for the illite, kaolinite, goethite and hematite nanoparticles. The AUD apparatus can be employed to efficiently collect large quantities of soil and related ENPs for investigation of their structural characteristics and surface properties, which have significant impact on weathering reaction pathways, catalysis, the fate of vital elements and environmental pollutants, and ecosystem restoration.     

不同农作物秸秆原料制备生物炭特性及重金属浸出行为

采用水稻秆、大豆秆、小麦秆和玉米秆为原料在550℃缺氧条件下制备生物炭,考察不同原料生物炭理化性质及热解后重金属(Cr﹑Ni、 Cu﹑As﹑Cd和Pb)迁移转化特征,及其在不同浸出液中的浸出行为.结果表明,4种原料制备的生物炭的理化特性和元素组成基本一致,其中玉米秆生物炭微孔体积(0.006 cm³·g^-1)和比表面积(110.120 m²·g^-1)低于其他原料生物炭.秸秆热解后重金属(除Cd外)含量增加了14.04%～410.81%,且大部分重金属(除Cd和Pb外)化学形态由不稳定态(弱酸提取态和可还原态)向稳定态(可氧化态和残渣态)转化.制备的生物炭中的重金属在超纯水和缓冲盐溶液中无浸出或浸出量较少,在乙酸溶液和腐殖酸溶液中浸出量较高.其中Cu在乙酸溶液中浸出量较高,为2.601～4.224 mg·kg^-1,As在腐殖酸溶液中浸出量较高,介于0.074～0.166 mg·kg^-1.热解后,各种重金属的环境质量指数(PI_i)和内梅罗...     

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species. Since the first tropospheric chemical mechanism was proposed in the 1960s, various mechanisms including Master Chemical Mechanism (MCM), Carbon Bond Mechanism (CBM), Statewide Air Pollution Research Center (SAPRC) and Regional Atmospheric Chemistry Mechanism (RACM) have been developed for different research purposes. This work summarizes the development and applications of these mechanisms, introduces their compositions and lumping methods, and compares the ways the mechanisms treat radicals with box model simulations. CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM, whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM. The photolysis rates of some oxygenated compounds are low in SAPRC07, which may result in underestimation of radical levels. As an explicit chemical mechanism, MCM describes the chemical processes of primary pollutants and their oxidation products in detail. MCM can be used to investigate certain chemical processes; however, due to its large size, it is rarely used in regional model simulations. A box model case study showed that the chemical behavior of OH and HO₂ radicals and the production of ozone were well described by all mechanisms. CBM and SAPRC underestimated the radical levels for different chemical treatments, leading to low ozone production values in both cases. MCM and RACM are widely used in box model studies, while CBM and SAPRC are often selected in regional simulations.     

生物炭施用对紫色土旱坡地土壤氮流失形态及通量的影响

明确生物炭施用对紫色土旱坡地土壤氮流失形态及通量的影响,为提升紫色土旱坡地耕地质量及减少紫色土旱坡地农业面源污染发生风险提供科学依据.以油菜/玉米轮作农田生态系统为研究对象,通过田间试验,研究了不施肥(对照)、常规施肥、优化施肥及生物炭(化肥减量配施生物炭)这4个处理对紫色土旱坡地地表径流和壤中流氮素流失形态及通量的影响.结果表明:①在各施肥处理中,常规处理总径流量最大,为16 133 L·a~(-1),生物炭处理总径流量最小,为11 893 L·a~(-1).各施肥处理以壤中流为主要径流方式,壤中流流失量占总流失量的61.80%～68.60%;与对照(不施肥处理)相比,其余各施肥处理泥沙流失量均有所降低,其中常规处理降低的效果最明显.②铵态氮主要通过地表径流流失,占总流失通量的86.51%～96.58%;铵态氮流失通量最大的为施生物炭处理[0.69 kg·(hm~2·a)~(-1)].③各施肥处理产流中的颗粒态氮浓度均高于对照处理,且常规施肥处理的颗粒态氮流失通量最大,为2.87 kg·(hm~2·a)~(-1).④各施肥处理的壤中流和地表径流中的全氮浓度和硝态氮浓度均存在极显著正相关关系(P0.01).硝态氮是全氮流失的主要形态,且二者均以壤中流为主要流失途径;全氮通过壤中流流失占比为72.86%～89.13%,且常规施肥处理的全氮总流失通量最大,为35.58 kg·(hm~2·a)~(-1),而施生物炭处理全氮总流失通量最小,为21.49 kg·(hm~2·a)~(-1).化肥减量配施生物炭能明显降低径流量和氮的流失通量,可有效阻控农业面源污染发生的风险.     

伊洛河流域河水来源及水化学组成控制因素

伊洛河是黄河中游南岸重要支流,由伊河和洛河在洛阳偃师汇合而成.流域上游矿产资源开采活动较多,下游城镇密集,工农业活动分布广泛.为探究不同类型人为活动对伊洛河流域河水水化学组成的影响,分别在丰水期(8月)和平水期(12月)采集伊洛河流域干流和支流河水样品,借助水体氢氧同位素组成和阴阳离子组成的时空分布特征,阐明水体来源以及水化学组成控制因素,说明人为活动的影响途径和方式.结果表明:①洛河干流河水丰水期和平水期δD和δ~(18)O均值分别为-56‰和-7.9‰以及-55‰和-8.1‰,伊河干流河水丰水期和平水期δD和δ~(18)O均值分别为-49‰和-6.9‰以及-53‰和-7.8‰,丰水期和平水期河水主要接受当地大气降水补给;②洛河及伊河干流河水水化学类型均为HCO_3-SO_4-Ca-Mg型,丰水期干流河水Ca~(2+)和HCO~-_3当量浓度占比低于平水期,而丰水期SO_4~(2-)当量浓度占比则高于平水期,显示丰水期较多硫酸盐输入;③碳酸和硫酸参与流域内碳酸盐岩和硅酸盐岩风化过程,洛河流域碳酸盐岩风化较明显,伊河流域硅酸盐岩风化较明显;④伊洛河流域人为输入影响表现在上游河水水化学组成受到金属矿产采选活动影响,下游河水水化学组成受工业废水和城镇生活污水的影响;⑤伊洛河流域上游和下游两种不同类型人为活动是河水硫酸盐硫同位素组成空间上变化的重要原因,上游河水硫酸盐硫同位素组成偏负,证实来自硫化物矿物氧化过程产生的硫酸盐贡献较大,进而间接证实硫酸参与岩石化学风化过程.下游河水硫酸盐硫同位素值偏正,与工业废水和城镇生活污水有关.     

中国分省道路交通二氧化碳排放因子

基于本地化的综合移动源排放模型（Motor Vehicle Emission Simulator,MOVES）模型模拟典型机动车的CO₂排放因子,并建立排放因子与速度变化关系的评估方程,结合各省路网平均速度与区域电网排放因子核算中国31个省份分车型的CO₂排放因子.同时,综合考虑载客汽车的载客量和客座率,载货汽车的载重量和载货率,建立各省单位客运,货运周转量的机动车CO₂排放因子库.结果表明,各类机动车的平均CO₂排放因子分别为：柴油公交车0.880kgCO₂/km,重型货车0.877kgCO₂/km,电动公交车0.676kgCO₂/km,中型货车0.508kgCO₂/km,轻型货车0.374kgCO₂/km,柴油小客车0.227kgCO₂/km,微型货车0.216kgCO₂/km,汽油小客车0.203kgCO₂/km,电动小客车0.108kgCO₂/km,摩托车0.062kgCO₂/km.车辆满载时,柴油公交车和电动公交车的人均CO₂排放量比汽油小客车分别降低了63%和73%,电动小客车的人均CO₂排放量较汽油和柴油小客车分别下降了46%和51%.较高的机动车保有量,频繁的道路拥堵导致上海,北京和重庆等市的机动车CO₂排放因子相对较高.倡导公共交通,提高客座率,降低私家车使用频率,推广纯电动汽车并通过减少道路拥堵以提高车速是降低道路交通CO₂排放量的有效途径.     

长期饥饿后SPNA微颗粒污泥系统性能恢复

为了确定长期饥饿后连续流一段式部分亚硝化-厌氧氨氧化（SPNA）工艺的性能恢复情况,采用连续流反应器,考察了在室温下（11~23℃）经历161d饥饿期的SPNA系统性能恢复策略的可行性及脱氮性能和菌群结构变化.通过控制DO浓度及进水氨氮负荷,逐渐实现亚硝酸盐氧化菌（NOB）的抑制和淘汰、氨氧化菌（AOB）和厌氧氨氧化菌（AnAOB）的活性恢复和富集.在68d内系统总氮去除率恢复至72.13%,氨氮去除率恢复至94.75%.微颗粒污泥（³200μm）的占比从42.04%升至60.98%.微生物群落结构分析发现,停止运行161d后系统Candidatus Kuenenia的相对丰度升至25.53%,表现出较强的抵抗饥饿条件的能力,系统恢复后其相对丰度逐渐降低,接近反应器饥饿前水平.AOB的高底物利用能力是系统恢复的前提,AnAOB活性的提高是系统恢复的关键.系统性能的成功恢复表明室温下161d饥饿期对系统造成的影响是可逆的,长期室温下储存SPNA污泥是可行的.     

Comparing dark- and photo-Fenton-like degradation of emerging pollutant over photo-switchable Bi2WO6/CuFe2O4: Investigation on dominant reactive oxidation species

The extensive use of tetracycline hydrochloride (TCH) poses a threat to human health and the aquatic environment. Here, magnetic p-n Bi₂WO₆/CuFe₂O₄ catalyst was fabricated to efficiently remove TCH. The obtained Bi₂WO₆/CuFe₂O₄ exhibited 92.1% TCH degradation efficiency and 50.7% and 35.1% mineralization performance for TCH and raw secondary effluent from a wastewater treatment plant in a photo-Fenton-like system, respectively. The remarkable performance was attributed to the fact that photogenerated electrons accelerated the Fe(III)/Fe(II) and Cu(II)/Cu(I) conversion for the Fenton-like reaction between Fe(II)/Cu(I) and H₂O₂, thereby generating abundant ?OH for pollutant oxidation. Various environmental factors including H₂O₂ concentration, initial pH, catalyst dosage, TCH concentration and inorganic ions were explored. The reactive oxidation species (ROS) quenching results and electron spin resonance (ESR) spectra confirmed that ?O₂^? and ?OH were responsible for the dark and photo-Fenton-like systems, respectively. The degradation mechanisms and pathways of TCH were proposed, and the toxicity of products was evaluated. This work contributes a highly efficient and environmentally friendly catalyst and provides a clear mechanistic explanation for the removal of antibiotic pollutants in environmental remediation.