Modeling Wetland Plant Community Response to Assess Water-Level Regulation Scenarios in the Lake Ontario – St. Lawrence River Basin

The International Joint Commission has recently completed a five-year study (2000–2005) to review the operation of structures controlling the flows and levels of the Lake Ontario – St. Lawrence River system. In addition to addressing the multitude of stakeholder interests, the regulation plan review also considers environmental sustainability and integrity of wetlands and various ecosystem components. The present paper outlines the general approach, scientific methodology and applied management considerations of studies quantifying the relationships between hydrology and wetland plant assemblages (% occurrence, surface area) in Lake Ontario and the Upper and Lower St. Lawrence River. Although similar study designs were used across the study region, different methodologies were required that were specifically adapted to suit the important regional differences between the lake and river systems, range in water-level variations, and confounding factors (geomorphic types, exposure, sediment characteristics, downstream gradient of water quality, origin of water masses in the Lower River). Performance indicators (metrics), such as total area of wetland in meadow marsh vegetation type, that link wetland response to water levels will be used to assess the effects of different regulation plans under current and future (climate change) water-supply scenarios.The Canadian Crown reserves the right to retain a non-exclusive, royalty free licence in and to any copyright.     

Treatment technology for remediation of wood preserving sites: Overview

This is the first in a series of five articles describing the applicability, performance, and cost of technologies for the remediation of contaminated soil and water at wood preserving sites. Site‐specific treatability studies conducted under the supervision of the United States Environmental Protection Agency (US EPA), National Risk Management Research Laboratory (NRMRL), from 1995 through 1997 constitute much of the basis for the evaluations presented, although data from other treatability studies, literature sources, and actual site remediations have also been included to provide a more comprehensive evaluation of remediation technologies. This article provides an overview of the wood preserving sites studied, including contaminant levels, and a summary of the performance of the technologies evaluated. The subsequent articles discuss the performance of each technology in more detail. Three articles discuss technologies for the treatment of soils, including solidification/stabilization, biological treatment, solvent extraction and soil washing. One article discusses technologies for the treatment of liquids, water and nonaqueous phase liquids (NAPLS), including biological treatment, carbon adsorption, photolytic oxidation, and hydraulic containment. The reader should be aware that other technologies including, but not limited to, incineration, thermal desorption, and base catalyzed dehalogenation, also have application for treating contaminants on wood preserving sites. They are not discussed in these five articles since the focus was to evaluate lesser known and hopefully lower cost approaches. However, the reader should include consideration of these other technologies as part of any evaluation or screening of technologies applicable to remediation of wood preserving sites.     

Solidification/stabilization for remediation of wood preserving sites: Treatment for dioxins,PCP, creosote,and metals

This article discusses the use of solidification/stabilization (S/S) to treat soils contaminated with organic and inorganic chemicals at wood preserving sites. Solidification is defined for this article as making a material into a freestanding solid. Stabilization is defined as making the contaminants of concern nonmobile as determined from a leaching test. S/S then combines both properties. For more information on S/S in general the reader should refer to other publications (Connors, J.R. [1990]). Chemical fixation and solidification of hazardous wastes. New York: Van Nostrand Reinhold; US Environmental Protection Agency. [1993a]. Engineering bulletin solidification/stabilization of organics and inorganics (EPA/540/S‐92/015); Wiles, C.C. [1989]. Solidification and stabilization technology. In H.M. Freeman [Ed.], Standard handbook of hazardous waste treatment and disposal. New York: McGraw Hill) as this article addresses only wood preserving sites and assumes basic knowledge of S/S processes. For a more general discussion of wood preserving sites and some other remedial options, the reader may wish to refer to a previous EPA publication (US Environmental Protection Agency. [1992a]. Contaminants and remedial options at wood preserving sites [EPA/600/R‐92/182]). This article includes data from the successful remediation of a site with mixed organic/inorganic contaminants, remediation of a site with organic contaminants, and detailed treatability study results from four sites for which successful formulations were developed. Included are pre‐ and post‐treatment soil characterization data, site vaines. ileizdot‐ names (in some cases), treatment formulas used (generic aridproprietary), costs, recommendations, and citatioiis to inore detailed refer‐ en ces. The data presen ted iiidica te that dioxins, pentachlorophepi 01 (PCP), creosote, polycyclic aromatic hydrocarbom (PAHsI, and metals can be treated at moderate cost by the use of S/S techuologp.     

The waste reduction (WAR) algorithm: environmental impacts, energy consumption, and engineering economics

A general theory known as the waste reduction (WAR) algorithm has been developed to describe the flow and the generation of potential environmental impact through a chemical process. The theory defines indexes that characterize the generation and the output of potential environmental impact from a process. The existing theory has been extended to include the potential environmental impact of the energy consumed in a chemical process. Energy will have both an environmental impact as well as an economic impact on process design and analysis. Including energy into the analysis of environmental impact is done by re-writing the system boundaries to include the power plant which supplies the energy being consumed by the process and incorporating the environmental effects of the power plant into the analysis. The effect of this addition on the original potential impact indexes will be discussed. An extensive engineering economic evaluation has been included in the process analysis which inherently contains the cost of the consumed energy as an operating cost. A case study is presented which includes a base process design and two modifications to the base design. Each design is analyzed from an economic perspective and an environmental impact perspective. The environmental impact analysis is partitioned into the impacts of the non-product streams and the impacts of the energy generation/consumption process. The comparisons of these analysis procedures illustrate the consequences for decision making in the design of environmentally friendly processes.     

Relationships among personal,indoor and outdoor NO2 measurements

Using integrating NO₂ diffusion dosimeters, personal, indoor and outdoor exposures were measured for nine families in Topeka, Kansas. NO₂ exposures in homes that used gas for cooking were clearly different from those in homes that used electricity. The gas-cooking homes had indoor levels three times the outdoor levels. Members of the gas-cooking households had levels twice those of electric-cooking families and twice the outdoor levels. A linear model that includes outdoor concentrations and stove types explains 77% of the variance in observed NO₂ exposure. The differential NO₂ exposures in homes with and without gas stoves should be considered in epidemiologic studies of the health effects of air pollution.     

Optimising the timing for nuchal translucency measurement

It appears from current evidence that the most effective screening strategy for Down syndrome will involve a combination of first trimester nuchal translucency and serum biochemistry, whether performed in the first or second trimester. The aim of this study was to determine the optimum gestation based upon menstrual dates at which to schedule nuchal translucency (NT) measurement for the evaluation of fetal Down syndrome risk. Five thousand eight hundred and thirty-five pregnancies had an ultrasound scan scheduled between 11 and 14 completed weeks of gestation based upon either the last menstrual period (n = 3199) or a prior ultrasound scan (n = 2636). For last menstrual period-based ultrasound scans, with advancing gestation the frequency of missed miscarriage significantly decreased (p = 0.009, chi squared test), as did the need to reschedule a further scan because the gestation of the scheduled scan was too early to measure NT (p < 0.0001, Chi-squared test). In contrast, with advancing gestation the rate of unsuccessful NT measurement because the crown–rump length (CRL) was greater than 84 mm significantly increased (p < 0.0001, Chi-squared test). Of the women who had had an earlier ultrasound, 42 (1.6%) had a missed miscarriage and 9 (0.3%) were over gestation at the time of the NT scan. These data suggest that when only the last menstrual period is known the optimum time to schedule a nuchal translucency measurement is at 12 to 13 weeks' gestation. Copyright © 2002 John Wiley & Sons, Ltd.     

Solving the United States National Park overflight controversy

By mid-1990 the National Park Service (NPS) must present to Congress recommendations for managing overflights of at least ten national parks. The authors examine the potential role of formal negotiation in setting overflight policy in these parks by reviewing the overflight controversy at Grand Canyon National Park (GCNP). Regulations controlling overflights of the GCNP are only now being implemented after a 17-year conflict that culminated in a congressionally mandated solution. The authors review this controversy and find that, contrary to common perception, the number of park visitors bothered by overflights is not small but roughly equals the number of airborne visitors (up to 450,000 per year). On the basis of this investigation, the authors determine that formal negotiation would have been an appropriate policy-making process because of the clearly defined and limited number of parties and issues involved. Considering the number of park visitors that will continue to be affected by this issue, the authors conclude that formal negotiations should be considered for overflight problems involving other parks. Such negotiations should be park-specific. Differences in park size, extent of the problem, and parties involved would prohibit park-wide negotiations.This article has been adapted from Tourist Flights over the Grand Canyon: The Potential for Negotiated Solutions to Similar Problems, Analysis and Management, October 30, 1987. The opinions expressed in this article are those of the authors; they are not meant to represent the views of the organizations with which the authors are associated.     

MANAGING THE COLORADO RIVER IN A SEVERE SUSTAINED DROUGHT AN EVALUATION OF INSTITUTIONAL OPTIONS1

ABSTRACT: This paper presents a summary of the findings and recommendations of the studies of severe, sustained drought reported in this special issue. The management facilities and institutions were found to be effective in protecting consumptive water users against drought, but much less effective in protecting nonconsumptive uses. Changes in intrastate water management were found to be effective in reducing the monetary value of damages, through reallocating shortages to low-valued uses, while only water banking and water marketing, among the possible interstate rule changes, were similarly effective. Players representing the basin states and the federal government in three gaming experiments were unable to agree upon and effect major changes in operating rules. The conclusions are (1) that nonconsumptive water uses are highly vulnerable to drought, (2) that consumptive uses are well-protected, (3) that drought risk is greatest in the Upper Basin, (4) that the Lower Basin suffers from chronic water shortage but bears little drought risk, (5) that opportunities exist for win-win rule changes, (6) that such rule changes are extremely difficult to make, and (7) that intrastate drought management is very effective ^m in reducing potential damages.     

Monitoring individual exposure. Measurements of volatile organic compounds in breathing-zone air, drinking water, and exhaled breath

Methods for determining individual exposure to volatile organic compounds (VOC) during normal daily activities were field tested on university student volunteers in Texas and North Carolina. The equipment tested included a personal monitor employing Tenax GC® to collect organic vapors for later analysis by GC-MS, and a specially designed spirometer for collecting samples of expired human breath on duplicate Tenax cartridges. The personal monitor and spirometer proved feasible for collecting abundant quantitative data on most of the 15 target organics. Air exposures to many VOC varied widely, sometimes over three orders of magnitude, among students on the same campus who had been monitored over the same time period and day. A log-linear relationship between breathing-zone air exposures and concentrations in exhaled breath was suggested for three chemicals: tetrachloroethylene, 1,1,1-trichloroethane, and vinylidene chloride. Air was the main route of exposure for all target compounds except the two trihalomethanes (chloroform and bromodichloromethane), which were transmitted mainly through water. Estimated total daily intake through air and water of the target organics ranged from 0.3 to 12.6 mg, with 1,1,1-trichloroethane at the highest concentrations in both geographic areas.