Surface Transportation Noise and Its Control

Surface transportation creates most of the noise pollution imposed on our communities today. Reduction of this noise impact requires effective preparation and enforcement of regulations to control noise sources, and methods and locations of operation. At the Federal level, such action has begun, within the limited authority available. Concurrently, research and development programs are demonstrating that means to satisfy noise control regulations are technically practical and economically reasonable. This paper provides a brief review of Federal regulatory areas and corresponding R&D activities pertinent to surface transportation noise abatement.     

Ethylene: An Urban Air Pollutant

Ethylene is an unusual air pollutant in that it is a plant hormone. Motor vehicle exhaust is a primary source. In the Washington, D. C, area, ethylene concentrations ranged from 700 ppb in the city center to 39 ppb in areas outside the circumferential beltway. Plants grown in these concentrations of ethylene, using controlled environment chambers, exhibited typical symptoms of ethylene toxicity: reduced growth, premature senescence, and reduced flowering and fruit production. When plants were grown in carbon-filtered ambient air, which was also filtered through KMnO₄ to remove ethylene by oxidation, growth, flowering, and fruit production increased. These observations demonstrate that ethylene air pollution is a continual source of stress for plant growth and development in an urban environment.     

Oxygenates in Exhaust from Simple Hydrocarbon Fuels

Photochemical air pollution is known to be caused largely by automotive emissions such as hydrocarbons and oxygenated hydrocarbon derivatives. Unlike the hydrocarbons, the contribution of the oxygenates has been virtually unexplored, mainly because of lack of appropriate analytical methods. The objective of this study was to identify and estimate the levels of oxygenated hydrocarbon derivatives in exhaust from simple hydrocarbon fuels. This information is expected to yield ultimately estimates of the relative levels of various classes of oxygenates in exhaust from full-boiling-range gasolines. Identification and measurement of oxygenates in exhaust from the simplified fuels were accomplished using gas chromatography in conjunction with time-of-flight mass spectrometry. The analytical procedure involved concentration of the exhaust organics, followed by a two-stage chromatographic separation of the resultant mixture of oxygenates and hydrocarbons. Identified oxygenates in exhaust from nine test fuels included saturated and unsaturated aldehydes, ketones, and alcohols, as well as ethers, esters, and nitroalkanes; analytical data on organic acids were inconclusive. Of the identified noncarbonyl oxygenates, phenols, cyclic ethers and nitromethane appear to be relatively the most abundant.     

The Survival of Airborne Serratia marcescens in Urban Concentrations of Sulfur Dioxide

Aerosols of Serratia marcescens ATCC 274 were suspended in a 709L rotating drum at 20 ± 1 °C and high to mid-range relative humidities. At specified times after bacterial aerosolization, sulfur dioxide was added to concentrations of 2.5, or 5 mg/m³. Viable cell decay rate constants, in control aerosols without added sulfur dioxide, increased rapidly from near 100% to 60% RH in the first hour (termed: young aerosol) of suspension, and from a minimum rate constant at 80% in the succeeding four hours (termed: old aerosol).Upon addition of sulfur dioxide to a cloud of S. marcescens, generally, viable cell decay rate constants increased further. One exception was at 80% relative humidity where maximum resistance to SO₂ accelerated death was observed for old aerosols. Cells in young aerosols were particularly sensitive to SO₂ addition at mid-range humidities, while in older aerosols the cells were insensitive to up to 5 mg SO₂/m³ introduced at high RH; but were up to 10 times more sensitive than cells in young aerosols to a given increase (from 2.5 to 5 mg/m³) in SO₂ concentration at mid-range humidities.     

Jet Aircraft Operations: Impact on the Air Environment

This paper is directed to those concerned with the air environment and its degradation by the burden of pollution from jet aircraft operations. A summary is presented of the results of a comprehensive air pollution study of jet aircraft operations at the Los Angeles International Airport (LAX). Included in the data obtained from this study are jet engine exhaust measurements for currently used turboprop, turbojet and turbofan engines; measurements of specific contaminants in the atmosphere inside and outside of passenger terminals and ticketing areas, and in aircraft cabins during ground operations including passenger loading and taxiing prior to takeoff; also presented are ambient air measurements in a two-mile radius of the airport. An evaluation is made of the emissions of contaminants from air transport operations and all related ground activities including motor vehicles, that contribute to the total atmospheric contaminant burden at the airport.     

Roof Monitor Emissions: Test Methodology

Studies of roof monitor emissions are conducted for two reasons: (1) to obtain design data necessary to engineer control systems to meet existing regulations, and (2) to determine projected control costs which can influence present day proposals for process change. Heated wire anemometers and rotating vane anemometers have been selected for velocity measurements, and high-volume air samplers have been selected to collect the particulate sample. Evaluation of other types of velocity sensing devices are described in the paper.

Roof monitor studies must be preceded by a preliminary survey to allow the project engineer to determine the test sampling locations and specific methodology necessary for the given study, and to allow the engineer to determine the type of safety equipment, scaffolds, and power requirements necessary to complete the study.

Field tests are conducted by operating a number of high-volume air samplers simultaneously while at the same time measuring the velocity of the gas through the monitor opening. Curves of particulate concentration and velocity as a function of monitor length are constructed. The concentration and velocity curves are then integrated together and the resultant curve is multiplied by the monitor width to determine a curve of mass emission rate as a function of monitor length. The total mass emission rate is represented by the area under the mass emission rate curve.

Procedures for calibrating the anemometers and correcting for the effect of power fluctuation on the high-volume sampler operation are described. Data evaluation procedures and discussion of test error are also described.

A study can cost between 10 and 20 thousand dollars, including the cost of manpower and the cost of scaffolds, power, cables, etc. It can take four months or more to conduct a study, from the preliminary survey phase through the report phase.     

Mathematical Modeling of Photochemical Smog Using the PICK Method

A new method for solving the turbulent atmospheric diffusion equation has been developed based on Lagrangian mass points, or particles moving through an Eulerian grid. The method is one of a family of Particle-/n-Cell techniques but is a unique extension to incorporate the effects of turbulent diffusion based on K-theory; thus the acronym PICK.

In the three-dimensional computer-aided model, NEXUS (Numerical EXamination of Urban Smog), this method has been applied to simulation of carbon monoxide (CO) in Los Angeles. For CO the NEXUS simulation was within 20% of observed day-averaged concentrations at 12 stations and the hour-averages were also in good agreement. This model was extended to include the effects of photochemical smog in Los Angeles. The results of the photochemical simulation were also qualitatively correct due to rapid NO to NO₂ conversion in the simulation.     

Emissions from Slash Burning and the Influence of Flame Retardant Chemicals

Pollutants sampled during the burning of 30 lb ponderosa pine fuel beds yielded emission factors for CO, hydrocarbon gases, and par-ticulate matter of 146, 8.4, and 9.1 lb/ton of fuel, respectively. When similar beds were treated with diammonium phosphate flame retardant, these factors increased to 166, 11.7, and 19.3 lb/ton of fuel, respectively.

Gas chromatographic analysis of hydrocarbon gases showed that 15-40% of this material was composed of methane and eth-ylene. Ethane and acetylene were the next most abundant materials, with photochemically important materials constituting minor portions of this gaseous component. Fuel beds treated with flame retardant produced more oiefins, and this production lasted throughout the smoldering phase of burning.

These tests showed that the smoldering phase of combustion is of major importance to air pollutant production during slash burning. The initial 80% of the fuel burned accounted for only 20-30% of HC and CO emissions. This suggests that a rapid mop-up of slash burns could substantially reduce air pollutant production.