Assessing and selecting interventions for river water quality improvement within the context of population growth and urbanization: a case study of the Cau River basin in Vietnam

In this study, a multi-criteria methodology is proposed to identify and prioritize interventions for water quality improvement with the aid of computer simulation models. The methodology can be used to elaborate and compare future socio-economic development scenarios to select the best interventions based on three criteria: (1) ideas of experts and stakeholders about the importance of scenarios, (2) impacts of each scenario on surface water quality in watershed, and (3) benefit–cost analysis for each scenario. A score is computed for each scenario based on a weighted sum technique which enables to take into consideration different level of importance for the three criteria. The methodology is applied to Cau River basin in Vietnam, with the aid of a computer tool, to assess interventions for river water quality improvement within the context of population growth and urbanization. The results show that fast future population growth in upstream has significant impacts. In 2020, an increase of 116 % of the population in Bac Kan town can lead to an increase of 120 and 135 % in BOD₅ and NH₄ ⁺ median concentrations, respectively, with the implementation of a treatment plant for 10,000 people in Bac Kan town. Therefore, the increase of the domestic wastewater treatment plant’s capacity in Bac Kan town, at least twice as the projection of local government, is necessary. These results will help decision makers to select the best interventions for Cau River basin management.     

Determining contamination level of heavy metals in road dust from busy traffic areas with different characteristics

This study identified the levels and sources of heavy metal contamination in road dust from busy traffic areas in a typical industrial city in Korea. This study compared the total concentrations, as determined by aqua regia digestions and atomic absorption spectroscopy, of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn) and nickel (Ni) in the road dust from areas with different characteristics such as traffic rotaries, downtown areas, circulation roads, and asphalt and concrete highways. The contamination levels of the heavy metals in the road dust were evaluated using the contamination factor and the degree of contamination. The contamination levels of the heavy metals in the road dust were highly dependent on traffic volume and atmospheric dispersion from traffic rotaries. Industrial emissions and the frequency of brake use and vehicles coming to a complete stop were additional factors that affected the contamination levels in downtown areas. The concrete highway had higher contamination levels of the heavy metals than the asphalt highway. Vehicle speed was also a strong contributing factor to the degree of contamination of heavy metals in the road dust from the circulation roads and highways.     

Advanced Aerogels from Wool Waste Fibers for Oil Spill Cleaning Applications

Journal of Polymers and the Environment - Oil spills causes severe degradation to marine ecosystems and poses long term health effects on many animals on the food chain, including humans. A...     

Electron microscopy study of biosorbents from marine macro alga Durvillaea potatorum

Biosorbents derived from the biomass of marine algae have shown to have high uptake capacities for heavy metals and the internal structure has been generally assumed to be pseudo-homogenous. In this paper, the microstructures of biosorbents derived from Australian marine alga Durvillaea poratorum were analysed using scanning electron microscopy. The structural components of the biosorbent resembled fiber-like cylinders. The internal structure was a highly connected network of cylinders with varying sizes. Methods of drying and pre-treatment of the biomass also affected the details of the internal structure. Calcium chloride followed by thermal treatment provided the most uniform cylinder networks for the biosorbents. Heavy metal Cu2+ and Cd2+ binding in the biomass was confirmed by using an electron probe microanalyser.     

Optimal Control Models and Elicitation of Attitudes towards Climate Damages

This paper examines the consequences of various attitudes towards climate damages through a family of stochastic optimal control models (RESPONSE): cost-efficiency for a given temperature ceiling; cost-benefit analysis with a pure preference for current climate regime and full cost-benefit analysis. The choice of a given proxy of climate change risks is actually more than a technical option. It is essentially motivated by the degree of distrust regarding the legitimacy of an assessment of climate damages and the possibility of providing in due time reliable and non controversial estimates. Our results demonstrate that (a) for early decades abatement, the difference between various decision-making frameworks appears to matter less than the difference between stochastic and non stochastic approach given the cascade of uncertainty from emissions to damages; (b) in a stochastic approach, the possibility of non-catastrophic singularities in the damage function is sufficient to significantly increase earlier optimal abatements; (c) a window of opportunity for action exists up to 2040: abatements further delayed may induce significant regret in case of bad news about climate response or singularities in damages.     

Comparative study on water-soluble inorganic ions in PM2.5 from two distinct climate regions and air quality

Recently, air quality has significantly improved in developed country, but that issue is of concern in emerging megacity in developing country.In this study, aerosols and their precursor gas were collected by NILU filter pack at two distinct urban sites during the winter and summer in Osaka, Japan and dry and rainy seasons in Ho Chi Minh City(HCMC),Vietnam.The aims are to investigate the contribution of water-soluble inorganic ions(WSIIs) to PM_(2.5), thermodynamic characterization and possible formation pathway of secondary inorganic aerosol(SIA).The PM_(2.5) concentration in Osaka(15.8 μg/m~3) is lower than that in HCMC(23.0 μg/m~3), but the concentration of WSIIs in Osaka(9.0 μg/m~3) is two times higher than that in HCMC(4.1 μg/m~3).Moreover, SIA including NH_4~+, NO_3~-and SO_4~(2-)are major components in WSIIs accounting for 90% and 76%(in molar) in Osaka and HCMC,respectively.Thermodynamic models were used to understand the thermodynamic characterization of urban aerosols.Overall, statistical analysis results indicate that very good agreement(R~2 0.8) was found for all species, except for nitrate aerosol in HCMC.We found that when the crustal species present at high amount, those compositions should be included in model calculation(i.e.in the HCMC situation).Finally, we analyzed the characteristics of NH_4~+– NO_3~-– SO_4~(2-)system.A possible pathway to produce fine nitrate aerosol in Osaka is via the homogeneous reaction between NH_3 and HNO_3, while nonvolatile nitrate aerosols can be formed by the heterogeneous reactions in HCMC.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Occurrence, fate and antibiotic resistance of fluoroquinolone antibacterials in hospital wastewaters in Hanoi, Vietnam

Occurrence and behavior of fluoroquinolone antibacterial agents (FQs) were investigated in hospital wastewaters in Hanoi, Vietnam. Hospital wastewater in Hanoi is usually not treated and this untreated wastewater is directly discharged into one of the wastewater channels of the city and eventually reaches the ambient aquatic environment. The concentrations of the FQs, ciprofloxacin (CIP) and norfloxacin (NOR) in six hospital wastewaters ranged from 1.1 to 44 and from 0.9 to 17 micrgl(-1), respectively. Total FQ loads to the city sewage system varied from 0.3 to 14 g d(-1). Additionally, the mass flows of CIP and NOR were investigated in the aqueous compartment in a small wastewater treatment facility of one hospital. The results showed that the FQ removal from the wastewater stream was between 80 and 85%, probably due to sorption on sewage sludge. Simultaneously, the numbers of Escherichia coli (E. coli) were measured and their resistance against CIP and NOR was evaluated by determining the minimum inhibitory concentration. Biological treatment lead to a 100-fold reduction in the number of E. coli but still more than a thousand E. coli colonies per 100ml of wastewater effluent reached the receiving water. The highest resistance was found in E. coli strains of raw wastewater and the lowest in isolates of treated wastewater effluent. Thus, wastewater treatment is an efficient barrier to decrease the residual FQ levels and the number of resistant bacteria entering ambient waters. Due to the lack of municipal wastewater treatment plants, the onsite treatment of hospital wastewater before discharging into municipal sewers should be considered as a viable option and consequently implemented.     

Mercury capture into biogenic amorphous selenium nanospheres produced by mercury resistant Shewanella putrefaciens 200

Shewanella putrefaciens 200, resistant to high concentration of Hg(II), was selected for co-removal of mercury and selenium from aqueous medium. Biogenic Hg(0) reduced from Hg(II) by S. putrefaciens 200 was captured into extracellular amorphous selenium nanospheres, resulting in the formation of stable HgSe nanoparticles. This bacterial reduction could be a new strategy for mercury removal from aquatic environments without secondary pollution of mercury methylation or Hg(0) volatilization.     

Numerical Modeling of Flow Fields and Dispersion of Passive Pollutants in the Vicinity of the Temelín Nuclear Power Plant

This study deals with numerical simulation of flow fields and dispersion of model passive admixtures in the planetary boundary layer in a 10 × 10 km square area, centered on the Czech Republic’s Temelín Nuclear Power Plant. Numerical calculations of three-dimensional flow fields with eight basic wind directions given for the inlet boundary of the computational domain are performed using the FLUENT CFD code with the standard k – ε turbulence model. The resultant modeling of the flow fields provides information as to probable local directions and velocities of flow vectors on a horizontal scale of 100 m, which are consistent with the data given for the boundaries of the calculation area in the framework of a scale of 10 km. The modeled flow fields generate the input data for related Lagrangian simulation of the ground concentration and deposition fields of passive particles assumedly emitted at the site of the Temelín plant. Simulated plumes describe eight cases of potential ground-level distribution of model passive admixtures in the area.