Estimation of the contributions of long range transported aerosol in East Asia to carbonaceous aerosol and PM concentrations in Seoul, Korea using highly time resolved measurements: a PSCF model approach

The contributions of long range transported aerosol in East Asia to carbonaceous aerosol and particulate matter (PM) concentrations in Seoul, Korea were estimated with potential source contribution function (PSCF) calculations. Carbonaceous aerosol (organic carbon (OC) and elemental carbon (EC)), PM(2.5), and PM(10) concentrations were measured from April 2007 to March 2008 in Seoul, Korea. The PSCF and concentration weighted trajectory (CWT) receptor models were used to identify the spatial source distributions of OC, EC, PM(2.5), and coarse particles. Heavily industrialized areas in Northeast China such as Harbin and Changchun and East China including the Pearl River Delta region, the Yangtze River Delta region, and the Beijing-Tianjin region were identified as high OC, EC and PM(2.5) source areas. The conditional PSCF analysis was introduced so as to distinguish the influence of aerosol transported from heavily polluted source areas on a receptor site from that transported from relatively clean areas. The source contributions estimated using the conditional PSCF analysis account for not only the aerosol concentrations of long range transported aerosols but also the number of transport days effective on the measurement site. Based on the proposed algorithm, the condition of airmass pathways was classified into two types: one condition where airmass passed over the source region (PS) and another condition where airmass did not pass over the source region (NPS). For most of the seasons during the measurement period, 249.5-366.2% higher OC, EC, PM(2.5), and coarse particle concentrations were observed at the measurement site under PS conditions than under NPS conditions. Seasonal variations in the concentrations of OC, EC, PM(2.5), and coarse particles under PS, NPS, and background aerosol conditions were quantified. The contributions of long range transported aerosols on the OC, EC, PM(2.5), and coarse particle concentrations during several Asian dust events were also estimated. We also investigated the performance of the PSCF results obtained from combining highly time resolved measurement data and backward trajectory calculations via comparison with those from data in low resolutions. Reduced tailing effects and the larger coverage over the area of interest were observed in the PSCF results obtained from using the highly time resolved data and trajectories.     

The Relationships Between Biomechanical and Postural Stresses,Musculoskeletal Injury Rates,and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study

A combination of archival, subjective, and observational field data collection methods were used to investigate the relationship between biomechanical and postural stresses, and the resulting physical strain experienced by industrial workers of a packaging plant. Assessment of physical strain was based on the number and incidence rate of Occupational Safety and Health Administration (OSHA)-reportable injuries that were recorded over a period of 27 months, and based on the self-reported ratings of perceived body discomfort. Both the biomechanical and postural stresses correlated with the musculoskeletal injury rate. The results illustrate the usefulness of postural and biomechanical analyses for assessing the risk of injury in industry.     

Cytotoxicity, genotoxicity and ecotoxicity assay using human cell and environmental species for the screening of the risk from pollutant exposure

For the screening of the risk from environmental contamination, the cytotoxic/genotoxic effects of various model pollutants were determined using an in vivo system comprised of human HeLa cells; the ecotoxicity was also determined using the acute and genotoxicity tests on two aquatic sentinel species widely used in biomonitoring, namely, freshwater crustacean, Daphnia magna and larva of aquatic midge, Chironomus tentans. Nonylphenol (NP), bisphenol A (BPA), bis(2-ethylhexyl) phthalate (DEPH) and paraquat dichloride (PQ) were used as the model pollutants. The results showed that exposure of HeLa cells to NP, BPA and DEHP was sufficient for the expression of noticeable genotoxic and cytotoxic effects. Ecotoxicity results showed that, as expected, D. magna was more sensitive than C. tentans to chemical exposure. BPA may exert a genotoxic effect on D. magna and C. tentans, given that DNA strand breaks increased in both species exposed to this compound, whereas NP-induced DNA damage occurred only in C. tentans. In vivo genotoxic data obtained in aquatic sentinel species could provide valuable information for freshwater quality monitoring. From the results of the present study, the use of cytotoxic, genotoxic and ecotoxic tests using human cell system, as well as, biomonitoring species, seems to be relevant for preliminary evaluation of the human health and ecological effects of pollutants and thus, a promising screening tool for environmental monitoring and risk assessment.     

Sulphamethazine in poultry manure changes carbon and nitrogen mineralisation in soils

Antibiotics are newly emerging organic pollutants in manure, soil, vegetables and water. Animal manure application might be leading to the accumulation of antibiotics in the farmland. However, the effect of sulphamethazine (SMZ) on the soil microbial community was scarcely investigated. This study was aimed to evaluate the impact of SMZ on poultry manure, on the structure and function of microbial community, carbon mineralisation, and changes in nitrogen forms in soil via an incubation experiment lasting 56?d. The treatments consisted of poultry manure at 1% wt (PM), PM containing 20?mg?kg^?1 SMZ (PM?+?20SMZ) and PM containing 100?mg?kg^?1 SMZ (PM?+?100SMZ), along with the untreated soil (control). Solid phase extraction was performed to measure the SMZ concentration in soils using high-pressure liquid chromatography. The cumulative CO₂-C was increased in all treated soils over the incubation period compared to the control. The PM?+?100SMZ had the highest increase in cumulative CO₂-C from the soil at 56?d of incubation. The treatment of PM?+?20SMZ showed a short-term decrease in nitrification rate in the soils at 1?d by altering the microbial community composition with 17% dissimilarity and decreasing the abundance of bacteria compared to PM-treated soil. The PM?+?100SMZ increased C mineralisation in the soil.     

Male coalitions and female behaviour affect male mating success independent of dominance rank and female receptive synchrony in wild Barbary macaques

Dominant mammalian males should gain a reproductive advantage due to their greater fighting abilities. However, the extent to which they can monopolise access to females varies across species. In primates and recently other mammalian species, the Priority of Access (PoA) model is commonly used to measure the degree to which male rank and female receptive synchrony affect mating skew. Few studies have examined the factors which lead to deviations from the expectations of the model. Here, we investigate male mating skew in wild Barbary macaques (Macaca sylvanus). We examined four of the main factors which affect male mating success: the roles of male rank, female receptive synchrony, coalitionary activity and female behaviour. We found that male mating was skewed up the hierarchy, but there was a large deviation from the PoA model's expectations with high-ranked males not gaining as big a share as expected. Females frequently initiated sexual encounters, predominantly with mid-ranked males, increasing their mating success. Male coalitionary activity independently increased mating success. Frequent associations with females were costly to males as they were the targets of bridging coalitions, decreasing future mating opportunities for the targets. High-ranking males did not increase their mating success directly through bridging coalitions but acted to dilute the effects of female behaviour. By examining different factors affecting mating skew, we are able to show that alternative male and female mating strategies are effective in reducing the monopolisation potential of the dominant male.     

Pulmonary inflammation induced by office dust and the relation to 1 → 3-β-glucan using different extraction techniques

It is observed that 1?→?3-β-glucan, a major cell wall component of fungi, induces pulmonary inflammation. There is inconsistency in determining the correlation between the levels of glucan measured by current extraction methods and the respiratory inflammation observed in individuals or lab animals exposed to environmental dust samples. The glucan-specific limulus amebocyte lysate (G-LAL) method was used after extraction with dimethyl sulfoxide (DMSO) or sodium hydroxide (NaOH) to analyze the glucan content of office dust samples collected from a water-damaged building. C3HeB/FeJ mice, an endotoxin-sensitive strain, were treated with different dust samples (2.5?mg?kg^?1 body weight) or saline (vehicle control) by pharyngeal aspiration. At 1?day after aspiration, bronchoalveolar lavage (BAL) was performed, and lung inflammation and injury were assessed by measuring: (1) neutrophil (PMN) infiltration, (2) inflammatory cytokine (IL-6, IL-10, MCP-1, IFN-γ, TNF-α, and IL12-p70) levels, and (3) albumin and lactate dehydrogenase in recovered BAL fluid. Both DMSO and NaOH extraction increased the detection of glucan by approximately 20-fold compared to water extraction. However, only the DMSO extraction method showed a statistically significant positive correlation between 1?→?3-β-glucan and albumin levels, total numbers of BAL, polymorphonuclear leukocytes (PMNs) cells recovered, levels of TNF-α, MCP-1, and IL-6. In conclusion, 1?→?3-β-glucan is a potent inflammatory agent in dust samples and DMSO extraction for glucan analysis may prove useful in understanding the impact of environmental contamination by glucans on lung disease.     

Growth dynamics of the seagrass <Emphasis Type="Italic">Halophila nipponica</Emphasis>, recently discovered in temperate coastal waters of the Korean peninsula

Seagrass species in the genus Halophila are usually distributed in tropical or subtropical areas, but a Halophila species identified as H. nipponica was first observed in temperate coastal regions of Korea in 2007. Since this species mainly occurs in warm temperate regions influenced by warm currents, we hypothesized that H. nipponica may exhibit different growth patterns from those of other temperate seagrass species in Korea, instead showing similar growth dynamics to tropical/subtropical species. The growth and morphology of H. nipponica in relation to coincident measurements of environmental factors were investigated from July 2008 to September 2009 to examine the growth dynamics of this species. Water temperature at the study site ranged from 9.7°C in January to 25.1°C in August. Shoot density, biomass, and productivity exhibited significant seasonal variation, increasing during summer and decreasing during winter. Productivity was severely restricted to nearly ceasing at water temperatures less than 15°C, and winter minimum growth lasted until May. The optimal temperature for H. nipponica growth was approximately 25°C, which was the maximum water temperature at the study site, and no growth reduction in high summer water temperature was observed. Thus, H. nipponica on the temperate coast of Korea exhibited a distinctly different growth pattern from those of temperate seagrass species in Korea, which have shown great reductions in growth at water temperatures higher than 20°C. Higher below- to above-ground ratio and leaf burial into sediments with shorter leaf petioles during winter might be overwintering strategies in this species. The growth patterns of H. nipponica at the study site imply that this species still possess the tropical characteristics of the genus Halophila.     

Evaluating the performance of methods for estimating the abundance of rapidly declining coastal shark populations

Accurately surveying shark populations is critical to monitoring precipitous ongoing declines in shark abundance and interpreting the effects that these reductions are having on ecosystems. To evaluate the effectiveness of existing survey tools, we used field trials and computer simulations to critically examine the operation of four common methods for counting coastal sharks: stationary point counts, belt transects, video surveys, and mark and recapture abundance estimators. Empirical and theoretical results suggest that (1) survey method selection has a strong impact on the estimates of shark density that are produced, (2) standardizations by survey duration are needed to properly interpret and compare survey outputs, (3) increasing survey size does not necessarily increase survey precision, and (4) methods that yield the highest density estimates are not always the most accurate. These findings challenge some of the assumptions traditionally associated with surveying mobile marine animals. Of the methods we trialed, 8 x 50 m belt transects and a 20 m radius point count produced the most accurate estimates of shark density. These findings can help to improve the ways we monitor, manage, and understand the ecology of globally imperiled coastal shark populations.     

Historical trends of trace metals in a sediment core from a contaminated tidal salt marsh in San Francisco Bay

Sedimentation of metals preserves historical records of contaminant input from local and regional sources, and measurement of metals in sediment cores can provide information for reconstruction of historical changes in regional water and sediment quality. Sediment core was collected from Stege Marsh located in central San Francisco Bay (California, USA) to investigate the historical input of trace metals. Aluminum-normalized enrichment factors indicate that inputs from anthropogenic sources were predominant over natural input for Ag, Cu, Pb, and Zn. Among these, lead was the most anthropogenically impacted metal with enrichment factors ranging from 32 to 108. Depth profiles and coefficients of variation show that As, Cd, and Se were also influenced by anthropogenic input. The levels of these anthropogenically impacted metals decline gradually towards the surface due to regulation of the use of leaded gasoline, municipal and industrial wastewater discharge control, and closure of point sources on the upland of Stege Marsh. Although trace metal contamination is expected to be continuously declining, the rates of decline have slowed down. For lead, it is estimated to take 44, 82, and 153 years to decrease to probable effects level (112 μg/g), the San Francisco Bay ambient surface sediment level (43.2 μg/g), and the local baseline levels (5 μg/g), respectively. Some metals in surface sediments (0–6 cm) are still higher than sediment quality guidelines such as the probable effects level. To further facilitate the recovery of sediment quality, more efficient management plans need to be developed and implemented to control trace metals from non-point sources such as stormwater runoff.