Contaminated sediments and bioassay responses of three macroinvertebrates, the midge larva Chironomus riparius, the water louse Asellus aquaticus and the mayfly nymph Ephoron virgo

Bioassays are widely used to estimate ecological risks of contaminated sediments. We compared the results of three whole sediment bioassays, using the midge larva Chironomus riparius, the water louse Asellus aquaticus, and the mayfly nymph Ephoron virgo. We used sediments from sixteen locations in the Dutch Rhine-Meuse Delta that differed in level of contamination. Previously developed protocols for each bioassay were followed, which differed in sediment pretreatment, replication, and food availability. The Chironomus bioassay was conducted in situ, whereas the other two were conducted in the laboratory. The measured endpoints, survival and growth, were related to contaminant levels in the sediment and to food quantity in water and sediment.

Only the response of A. aquaticus in the bioassay was correlated with sediment contamination. Food availability in overlying water was much more important for C. riparius and E. virgo, thereby masking potential sediment contaminant effects. We conclude that growth of A. aquaticus was depressed by sediment contamination, whereas growth of E. virgo and C. riparius was stimulated by seston food quantity. We discuss that the trophic state of the ecosystem largely affects the ecological risks of contaminated sediments.     

Trends of air pollution in the Fichtelgebirge Mountains, Bavaria

We analyzed 13 years of hourly measurements of SO₂, NO_x, and O₃, at forest ecosystem research sites in SE Germany. A quasi-continuous data record was obtained by combining data sets from two locations. Before interpreting trends in the combined data set, we analyzed if the change of location introduced a systematic bias. We employed autocorrelation functions, Hurst statistics, complexity analysis, and recurrence quantification and found that the partial data sets exhibited no indication of the presence of any bias. For SO₂, we also compared the data from the forest sites with data obtained in nearby cities and also found no indications for any systematic effects. Applying nonparametric trend statistics we found a significant decrease of the SO₂. Most of the observed decrease is due to the reductions of SO₂ emissions in eastern Germany, but reductions in western Germany and the Czech Republic also played important roles. For O₃, we observed a significant increase, the causes of which are unclear from our data alone. No trend was identified for NO_x.     

Does traumatic secretion transfer manipulate mating roles or reproductive output in a hermaphroditic sea slug?

Copulation in the simultaneous hermaphrodite Siphopteron sp. involves injection of prostate fluids into the mating partner with a stylet-shaped penile appendage before insemination. It has been hypothesised that such traumatic secretion transfer manipulates sex roles or the recipient’s short-term reproductive output. To test manipulative effects of traumatic secretion transfer, we ablated the stylet of male-acting individuals and then paired them to untreated focal individuals. Mating behaviour and egg output of focal individuals was then compared between this ‘no injection group’ and a ‘control group’ with sham-treated mating partners. We found that penile stylets were inserted at different areas prior to and during insemination, but prostate fluid injection was restricted to the first phase. Here, injections were into the anterior foot region, indicating that prostate secretions target the nearby male or female copulatory tracts. Our experimental manipulation of traumatic secretion transfer did not affect the exhibited mating roles. Matings in both treatments were usually reciprocal so that both partners acted in the male as well as female mating role. Moreover, sperm recipient reproductive output did not differ between treatments. We conclude that traumatic secretion transfer in this species either affects currently unmeasured traits, for instance the donor’s paternity share, or that these sea slugs are so well-adapted to traumatic secretion transfer that the effects were too subtle to be detected in our current assays.     

Correlation of six anthropogenic markers in wastewater, surface water, bank filtrate, and soil aquifer treatment

Six trace contaminants (acesulfame (ACE), sucralose (SUC), carbamazepine (CBZ), diatrizoic acid (DTA), 1H-benzotriazole (BTZ) and its 4-methyl analogue (4-TTri)) were traced from wastewater treatment plants (WWTPs) to receiving waters and further to riverbank filtration (RBF) wells to evaluate their prediction power as potential wastewater markers. Furthermore, the persistence of some compounds was investigated in advanced wastewater treatment by soil aquifer treatment (SAT). During wastewater treatment in four conventional activated sludge WWTPs ACE, SUC, and CBZ showed a pronounced stability expressed by stable concentration ratios in influent (in) and effluent (out) (ACE/CBZ: in45, out40; SUC/CBZ: in1.8, out1.7; and ACE/SUC: in24, out24). In a fifth WWTP, additional treatment with powdered activated carbon led to a strong elimination of CBZ, BTZ, and 4-TTri of about 80% and consequently to a distinctive shift of their ratios with unaffected compounds. Data from a seven month monitoring program at seven sampling locations at the rivers Rhine and Main in Germany revealed the best concentration correlation for ACE and CBZ (r(2) = 0.94) and also a good correlation of ACE and CBZ concentrations to BTZ and 4-TTri levels (r(2) = 0.66 to 0.82). The comparison of ratios at different sampling sites allowed for the identification of a CBZ point source. Furthermore, in Switzerland a higher consumption of SUC compared to Germany can be assumed, as a steadily increasing ACE/SUC ratio along the river Rhine was observed. In RBF wells a good correlation (r(2) = 0.85) was again observed for ACE and CBZ. Both also showed the highest stability at a prolonged residence time in the subsurface of a SAT field. In the most peripheral wells ACE and CBZ were still detected with mean values higher than 36 μg L(-1) and 1.3 μg L(-1), respectively. Although SUC concentrations in wastewater used for SAT decreased by more than 80% from about 18 μg L(-1) to 2.1 μg L(-1) and 3.5 μg L(-1) in these outlying wells, the compound was still adequate to indicate a wastewater impact in a qualitative way.     

Influence of different textile fibers on characterization of dyeing wastewater and final effluent

Textile industry needs to recover and reuse its wastewater as to fulfil the demand of increasingly strict regulations. The characterization of dyeing wastewater samples according to textile fiber and final textile effluent enables the application of different treatment methods. This study aims to characterize dyeing wastewater in black color of polyamide, polyester, and viscose fibers and final textile effluent. Samples were collected and characterized completely for major pollution indicator parameters. Dyeing wastewater of polyester showed higher values for some parameters, e.g., 4994.44% (49,944,400 mg L^?1 and 917 NTU) of turbidity and 4100.00% of phenol when compared to dyeing wastewater of other fibers. Other parameters such as pH, alkalinity, color, phosphorus, nitrogen, sulfides, chlorides, oil and grease, dissolved solids, and chemical and biochemical oxygen demand were also assessed. In addition to individual characterization, this study also presents a correlation of the contribution of each parameter to the final textile effluent. Although dyeing wastewater of polyamide contributes the most in terms of quantity for the final effluent, this study revealed that dyeing wastewater of polyester influenced the most on the final composition of the textile wastewater when evaluating color, turbidity, total iron, biochemical oxygen demand, chemical oxygen demand, phenol, mercury, oil and grease, and total phosphorus. The present study is focused on bringing new insights to provide future research with other strategies to improve the treatment of dyeing wastewater. In addition, some suggestions are also given for wastewater treatments according to type of textile fiber.     

Mid-21st century climate and weather extremes in Cyprus as projected by six regional climate models

We present climate change projections and apply indices of weather extremes for the Mediterranean island Cyprus using data from regional climate model (RCM) simulations driven by the IPCC A1B scenario within the ENSEMBLES project. Daily time-series of temperature and precipitation were used from six RCMs for a reference period 1976–2000 and for 2026–2050 (‘future‘) for representative locations, applying a performance selection among neighboring model grid-boxes. The annual average temperatures of the model ensemble have a ±1.5°C bias from the observations (negative for maximum and positive for minimum temperature), and the models underestimate annual precipitation totals by 4–17%. The climatological annual cycles for the observations fall within the 1σ range of the 6-model average, highlighting the strength of using multi-model output. We obtain reasonable agreement between models and observations for the temperature-related indices of extremes for the recent past, while the comparison is less good for the precipitation-related extremes. For the future, the RCM ensemble shows significant warming of 1°C in winter to 2°C in the summer for both maximum and minimum temperatures. Rainfall is projected to decrease by 2–8%, although this is not statistically significant. Our results indicate the shift of the mean climate to a warmer state, with a relatively strong increase in the warm extremes. The precipitation frequency is projected to decrease at the inland Nicosia and at the coastal Limassol, while the mountainous Saittas could experience more frequent 5–15 mm/day rainfall. In future, very hot days are expected to increase by more than 2 weeks/year and tropical nights by 1 month/year. The annual number of consecutive dry days shows a statistically significant increase (of 9 days) in Limassol. These projected changes of the Cyprus climate may adversely affect ecosystems and the economy of the island and emphasize the need for adaptation strategies.     

Immiscible fluid flow in porous media: dielectric properties

The movement and retention of immiscible fluids in porous media was determined using a microwave dielectric measuring technique. The technique was used to monitor the composite dielectric constant of columns containing model soil materials to observe the effect of displacement of various saturating fluids by water and determine the retained immiscible components. Various combinations of displacing fluids, both miscible and immiscible, were studied, yielding time-dependent flow characteristics as well as the total retention factor. The flow circumstances were similar to what would be encountered in an accidental spill of chlorocarbons or crude oil.The retention of chlorocarbons and crude oil was determined for model soils consisting of sand or glass spheres. The storage capacity of the sand for immiscible fluids was dependent on the fluid initially saturating the porous medium. For chlorocarbons, it was increased in water-wet compared to dry sands while the inverse was true for crude oil. The retention of crude oil in the sand was dependent on the water flow velocity and was much larger than that for chlorocarbons. The crude oil could be displaced by solvents such as cyclohexane in the sand but the net volume occupied by the two immiscible fluids after water flushing did not change appreciably, i.e. the crude oil component was replaced by the solvent. Application of a miscible fluid-water mixture or surfactants improved the ability of water to displace the immiscible fluid from the sand column.