Joining sheet panels to thin-walled tubular profiles by tube end forming

This paper is focused on novel utilizations of the fundamental modes of deformation of tube end forming for assembling sheet panels to thin-walled tubular profiles.The objective is to present an innovative and environmental friendly joining technology built upon the combination of compression beading with tube inversion that can successfully eliminate currently available technologies based on mechanical fixing with fasteners, welding and structural adhesive bonding. The technology works at room temperature, is capable of ensuring significant economic and time savings and offers potential for opening new markets for the assembly of lightweight frame structures.The presentation is supported by experimentation and numerical modelling based on independently determined mechanical properties of the materials with the purpose of characterizing and evaluating the process feasibility limits as a function of the major operative parameters.The feasibility of joining sheet panels to tubular profiles by means of the proposed technology is demonstrated by presenting industrial applications and by evaluating the performance of a safety auto part in an operation failure test.     

The Relationship between “Soiling Index” and Suspended Particulate Matter Concentrations

Experimental relationships between the mass concentration of suspended particulate matter and the optical density of particulates collected on paper tape have been determined for the atmospheric aerosol and for aerosols of constant optical properties. Simultaneous samples were obtained on membrane filters (for gravimetric analysis) and on Whatman No. 4 paper tape (for optical evaluation). Sampling procedures were adopted which ensured that the efficiency of sampling was the same in both cases.

Consistent relationships between mass concentrations of suspended particulate matter and optical density expressed in terms of per cent transmittance or per cent reflectance were found for dispersions of coal, limestone, fly ash, and a coal-limestone mixture.

For atmospheric aerosol samples collected on the roof of the Graduate School of Public Health, University of Pittsburgh, the relationship between mass concentration and per cent transmittance or per cent reflectance was found to be linear over the range of values observed. The correlation coefficients were ?0.93 (for concentration versus per cent transmittance) and ?0.89 (for concentration versus per cent reflectance).     

Using forest historical information to target landscape ecological restoration in Southwestern Patagonia

Ambio - Ecotonal zones between eastern semi-arid steppes and Nothofagus spp. forests in western Patagonia are the result of broad ecosystem changes, which have intensified in the last...     

Methods to prepare biosorbents and magnetic sorbents for water treatment: a review

Access to drinkable water is becoming more and more challenging due to worldwide pollution and the cost of water treatments. Water and wastewater treatment by adsorption on solid materials is usually cheap and effective in removing contaminants, yet classical adsorbents are not sustainable because they are derived from fossil fuels, and they can induce secondary pollution. Therefore, biological sorbents made of modern biomass are increasingly studied as promising alternatives. Indeed, such biosorbents utilize biological waste that would otherwise pollute water systems, and they promote the circular economy. Here we review biosorbents, magnetic sorbents, and other cost-effective sorbents with emphasis on preparation methods, adsorbents types, adsorption mechanisms, and regeneration of spent adsorbents. Biosorbents are prepared from a wide range of materials, including wood, bacteria, algae, herbaceous materials, agricultural waste, and animal waste. Commonly removed contaminants comprise dyes, heavy metals, radionuclides, pharmaceuticals, and personal care products. Preparation methods include coprecipitation, thermal decomposition, microwave irradiation, chemical reduction, micro-emulsion, and arc discharge. Adsorbents can be classified into activated carbon, biochar, lignocellulosic waste, clays, zeolites, peat, and humic soils. We detail adsorption isotherms and kinetics. Regeneration methods comprise thermal and chemical regeneration and supercritical fluid desorption. We also discuss exhausted adsorbent management and disposal. We found that agro-waste biosorbents can remove up to 68–100% of dyes, while wooden, herbaceous, bacterial, and marine-based biosorbents can remove up to 55–99% of heavy metals. Animal waste-based biosorbents can remove 1–99% of heavy metals. The average removal efficiency of modified biosorbents is around 90–95%, but some treatments, such as cross-linked beads, may negatively affect their efficiency.

     

Post-merger time series analysis: Iron ore mining

In Brazil, mergers and acquisitions are usually analyzed by the antitrust authorities ex post, following a Structure-Conduct-Performance approach close to the US Merger Guidelines. However, this framework was unable to address the complexity posed by a series of acquisitions of four mining companies by the newly privatized national champion Companhia Vale do Rio Doce (known then as CVRD, nowadays as Vale). This article extends a Vector Error Correction model estimated by the Brazilian Ministry of Justice, which eventually came to reinforce the definition of the relevant geographic market and to test for structural breaks in the price series. A formal horizontal merger simulation model was not viable from the available data. Though international prices Granger-caused domestic prices in Brazil, they explain less than a third of the variance. Domestic price hikes in the acquired miners’ series were observed above the export price increase not long after the acquisitions, and a structural break could not be rejected. Since convergence of domestic prices to international levels were not to be punished, remedies eventually applied by the Brazilian Antitrust Tribunal focused on preventing CVRD from abusing dominant position to vertically foreclose competitors in logistics, a key competitive issue for the industry.     

Environmental fate of glyphosate and aminomethylphosphonic acid in surface waters and soil of agricultural basins

Argentinian agricultural production is fundamentally based on a technological package that combines no-till and glyphosate in the cultivation of transgenic crops. Transgenic crops (soybean, maize and cotton) occupy 23 million hectares. This means that glyphosate is the most employed herbicide in the country, where 180–200 million liters are applied every year.     

Hydrological benefits in the context of Brazilian environmental services program

The Brazilian program of payment for environmental services (PES) is based on ranges of potential erosion decrease (ED) from soil and water conservation proposals estimated from the Universal Soil Loss Equation. Changes in land use and land cover (LULC) result in many alterations of the basin water balance. Therefore, to contribute to the methodological development of Brazilian PES, this paper proposes a quantification of hydrological benefits based on conservation measures. We propose basing the PES program on adding the potential water storage increase (WSI) parameter estimated from the runoff curve number model. Two LULC change scenarios were run considering conservation measures on degraded areas. We found that indicators of ED and WSI were compatible tools for driving the eligibility of soil and water conservation measures. However, the water storage parameter seems to be better at managing the PES mechanism because it is based on water prices and can contribute to appreciation of the efforts performed by the rural producers. The use of the SCS-CN method presents greater feasibility as a tool for the implementation of PES programs in ungauged basins. Thus, an analysis of the success of the innovation proposal of the Brazilian PES program allows inferences to be made about the quantification and financial valuation of hydrological benefits of the potential storage increase and current water price.     

Consumption of low-density polyethylene,polypropylene, and polystyrene materials by larvae of the greater wax moth,Galleria mellonella L. (Lepidoptera,Pyralidae), impacts on their ontogeny

Low-density polyethylene (LDPE), biaxially oriented polypropylene (BOPP), and expanded polystyrene (EXPS) are the most common plastics found in every home of the world, but only ~ 10% enter the recycling chains. Consequently, the study of plastic biodegradation by microorganisms and insects, such as the wax moths, has gained special interest. Galleria mellonella (L.) has been shown to consume single-layered polyethylene and polystyrene, though biological impacts of this consumption have been rarely reported. We evaluated the consumption of different plastics by G. mellonella larvae (L7, mean size: 25–30 mm) and its effect on larval duration, survival, and development. For this, we offered the larvae five diets: single-layered LDPE, EXPS, BOPP, triple-layered polyethylene (SB, for silo-bags), and a control with beeswax. We recorded the state and weight of the materials and the state of larvae until they reached the adult stage. Larvae consumed more PE (both LDPE and SB) and EXPS than BOPP; still, they were able to emerge as adults in all treatments. Larvae that consumed plastics turned into pupal stage faster than those that consumed beeswax, regardless of the type and amount of plastic consumed. This is the first report of wild G. mellonella larvae in Argentina consuming biaxially polypropylene and silo-bags.

     

Balneotherapy year in review 2021: focus on the mechanisms of action of balneotherapy in rheumatic diseases

Environmental Science and Pollution Research - Balneotherapy (BT) is one of the most commonly used non-pharmacologic complementary therapies for different rheumatic diseases. Its beneficial...