Caste and division of labor in leaf-cutter ants (Hymenoptera: Formicidae: Atta)

Summary Leaf cutting was selected for an evaluation of ergonomic efficiency in the fungus-growing ant Atta sexdens because it is performed largely by medias (head width 1.8–2.8 mm), which attend to relatively few other functions and hence are less likely to be evolutionarily compromised by the demands of competing tasks (Fig. 1).Three alternative a priori criteria of evolutionary optimization were envisioned that are consistent with natura selection theory: the reduction of predation by means of defense and evasion during foraging, the minimization of foraging time through skill and running velocity during foraging, and energetic efficiency, which must be evaluated with reference to both the energetic construction costs of new workers and the energetic cost of maintenance of the existing worker force.In order to measure the performance of various size groups within the A. sexdens worker caste in isolation, I devised the pseudomutant technique: in each experiment, groups of foraging workers were thinned out until only individuals of one size class were left outside the nest. Measurements were then made of the rate of attraction, initiative in cutting, and performance of each size group at head-width intervals of 0.4 mm (Figs. 2, 3, and 7). Other needed measurements were made in body weight, oxygen consumption, and running velocity (Figs. 5, 6, and 8).The size-frequency distribution ff leaf cutters in the A. sexdens conforms closely to the optimum predicted by the energetic efficiency criterion for harder forms of vegetation, such as rhododendron leaves. The distribution is optimum with reference to both construction and maintenance costs. The difference between the predicted and actual modal size groups specializing on leaf cutting is 10% or less of the total size range of the sexdens worker caste.A model was next constructed in which attraction and initiative were allowed to evolve genetically to uniform maximum levels. The theoretical maximum efficiency levels obtained by this means were found to reside in the head-width 2.6–2.8 mm size class, or 8% from the actual maximally efficiency class (head width 2.2–2.4 mm). In the activity of leaf cutting, A. sexdens can therefore be said to be not only at an adaptive optimum but also, within at most a relatively narrow margin of error, to have been optimized in the course of evolution.     

Determination of 99Tc, 63Ni and 121m+126Sn in the marine environment

Four artificially produced radionuclides (${}^{99}\text{Tc, t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 2·15 × 10}{}^5\text{y;}{}^{63}\text{Ni, t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 93 y}$ and ${}^{\mathrm{121m+126}}\text{Sn, t}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 55·5 y}$) have been analyzed in sediments and organisms from the marine environment. The samples were obtained from the vicinities of nuclear energy facilities, at sites of nuclear weapon tests and at sites remote from both of these locales. The activities of these nuclides per unit dry weight are remarkably similar at the first two of the above areas but are usually detectable only with difficulty, if at all, in the third area. Techniques for sample treatment and measurement are given.     

Atmospheric BTEX-concentrations in an area with intensive street traffic

The major threat to clean air in developed and industrializing countries is now posed by traffic emissions. The effects of traffic road modifications on the air quality are, however, rarely reported in the literature. The aim of this study was to determine the influence of the modernization and renovation of a traffic artery in the region of Mortsel (Antwerp, Belgium) on the concentration of volatile organic compounds such as: benzene, toluene, ethylbenzene and m-, p-, o-xylenes (BTEX). The original goal of the reconstruction works was to reduce the traffic lanes of one of the busiest streets in Antwerp, in order to discourage the road traffic and in consequence also to improve the air quality in this region. The average concentrations of BTEX before these works in 2003 were: 1.6, 7.0, 0.9, 2.3, and 0.9 μg/m³, for benzene, toluene, ethylbenzene, m + p xylenes, and o-xylene, respectively. However, after the completion of the works, in 2005, they were slightly higher: 2.5, 9.5, 1.6, 3.4, and 1.3 μg/m³, respectively. The scatter plots of benzene against toluene, ethylbenzene and xylenes in 2003 and 2005 showed very good correlations. This fact indicated that all of the measured compounds originated from the same source, namely the road traffic. Moreover, the data obtained from an air-monitoring station at less than 6 km distance from the sampling site (operated by the Flemish Environment Agency, and located in Borgerhout, Antwerp), confirmed the lack of influence of background concentrations of BTEX. The obtained results led to the conclusion that the reduction of the number of traffic lanes had apparently increased the traffic jams and also increased the emission from cars. Therefore, these modernization works had even a negative impact on the local concentration of traffic-related pollutants as BTEX.     

Fabric filters versus electrostatic precipitators

Control of particulate emissions from pulverized coal fired steam generators is becoming a significant factor in the siting and public acceptability of large coal burning power plants. The particulate emission limit established by the EPA for new coal fired boilers is 0.03 lb/10⁶ Btu (13 ng/J) Possibly more restrictive than this is the state of New Mexico's particulate regulation which calls for no more than 0.05 lb/10⁶ Btu (22 ng/J) total, and no more than 0.02 lb/10⁶ Btu (9 ng/J) less than 2 microns in diameter. This paper will evaluate the effect of these stringent limitations on the technical feasibility and economics of dry particulate removal. Electrostatic precipitators have been the dominant particulate collection device in the electric utility industry for many years because of their low capital and operating cost. However, increasingly stringent emission standards have led to substantially higher costs for precipitators. These costs have increased sufficiently for fabric filtration to become a competitive alternative in achieving cost effective control. This paper will compare the economics and performance of fabric filtration with respect to conventional electrostatic precipitators. The paper will also address the preliminary evaluation procedures that should be followed in order to select the appropriate device for new or existing coal-fired boilers.     

Successfully applying sparging technologies

Air sparging is an innovative methodology for remediating organic compounds present in contaminated, saturated soil zones. In the application of the technology, sparging (injection) wells are used to inject a hydrocarbon-free gaseous medium (typically air) into the saturated zone below or within the areas of contamination. Two major mechanisms of remediation are engaged/enhanced due to the sparging process. First, volatile organic compounds are dissolved in the groundwater and sorbed on the soil partition into the advective air phase, effectively simulating an in-situ air stripping system. The stripped contaminants are transported in the air phase to the vadose zone, generally within the radius of influence of a standard vapor extraction and vapor treatment system. Second, with optimal environmental conditions, volatile and semivolatile organic compounds may be biodegraded by utilizing the sparging process to oxygenate the groundwater, thereby enhancing the growth and activity of the indigenous bacterial community. Air sparging is a complex multifluid phase process which has been applied successfully in Europe since the mid-1980s. Major design considerations include site geology, contaminant type, gas injection pressures and flow rates, injection interval (areal and vertical), and site-specific biofeasibility parameters. Site-specific geology and biofeasibility are the dominant design parameters. Pilot testing and full-scale design considerations should also be addressed. Mathematical models have been developed to simulate the air flow field during the sparging process and to examine the limitations imposed by site geology. Correct design and operation of this technology have been demonstrated to achieve groundwater cleanup to low part-per-billion contaminant levels. Incorrect design and operation can introduce significant pollution liability through undesirable contaminant migration in both the dissolved and vapor phases.     

Developments and prospects of world lead and zinc mining

World developments in lead and zinc are examined for 1970-90 and projections presented for 1995. Although lead consumption has Increased during the period under review, lead mine production has been on a decline, the differences being made up from secondary lead sources. Lead mine production is projected to be steady to 1995, with increased consumption continuing to be met from secondary sources. Zinc mine production increased at a trend rate of about 1% per year between 1970 and 1990, but for 1991-95, production is expected to grow at a lower rate. For 1990-95 zinc consumption is expected to grow at a rate of 2.3%. This modest mine production increase to 1995 is unlikely to be adequate to meet growth in MEC zinc consumption.     

WATER QUALITY DURING STORM EVENTS FROM TWO CONSTRUCTED WETLANDS RECEWING MINE DRAINAGE1

ABSTRACT: Flow rates, pH, iron concentration, and manganese concentration were measured during several storm events at two constructed wetlands receiving mine water. During a substantial rain event, flow rates at both the wetland outlets surpassed flow rates at the wetland inlets, reflecting incident rainfall and differences in wetland area at the two sites. A significant positive correlation existed between local rainfall and outflow rates at the larger wetland, but not between rainfall and inflow rates. During storm events, outlet pH, relative to inlet pH, was slightly elevated at the larger wetland, and depressed at the smaller wetland. However, over the course of one year, rainfall was uncorrelated to outlet pH in the larger wetland. A substantial rain event at the smaller wetland resulted in a temporary elevation in outlet iron concentrations, with treatment efficiency reduced to near zero. However, in the larger wetland, outlet iron concentrations were not significantly affected by storm events. Although rainfall and outlet iron concentration were not significant correlates at the larger wetland, flow rate was positively correlated to outlet iron concentration. A normal manganese treatment efficiency of 50 percent at the smaller wetland was reduced to zero during a heavy rain.     

ELECTRONIC DATA PROCESSING SYSTEM FOR STREAMFLOW1

Daily, monthly, and yearly summaries of streamflow and sediment transport are computed from continuous gage height records and discrete measurements of sediment concentration and discharge rate. The system includes computer computation of discharge measurement notes and an accuracy check of gage height and time input data. Maximum volumes of runoff for selected time intervals up to eight days and flow duration data can also be compiled. Electronic data processing equipment including a chart reader, card punch, computers, and card sorter are used. The system software includes 12 Fortran programs.