Comparison of the Particle Size Distribution of Heavy-Duty Diesel Exhaust Using a Dilution Tailpipe Sampler and an In-Plume Sampler during On-Road Operation

ABSTRACT

Originally constructed to develop gaseous emission factors for heavy-duty diesel trucks, the U.S. Environmental Protection Agency's (EPA) On-Road Diesel Emissions Characterization Facility has been modified to incorporate particle measurement instrumentation. An electrical low-pressure impactor designed to continuously measure and record size distribution data was used to monitor the particle size distribution of heavy-duty diesel truck exhaust. For this study, which involved a high-mileage (900,000 mi) truck running at full load, samples were collected by two different methods. One sample was obtained directly from the exhaust stack using an adaptation of the University of Minnesota's air-ejector-based mini-dilution sampler. The second sample was pulled from the plume just above the enclosed trailer, at a point ~11 m from the exhaust discharge. Typical dilution ratios of about 300:1 were obtained for both the dilution and plume sampling systems. Hundreds of particle size distributions were obtained at each sampling location. These were compared both selectively and cumulatively to evaluate the performance of the dilution system in simulating real-world exhaust plumes. The data show that, in its current residence-time configuration, the dilution system imposes a statistically significant bias toward smaller particles, with substantially more nanoparticles being collected than from the plume sample.     

Technology Innovations and Experience Curves for Nitrogen Oxides Control Technologies

Abstract

This paper reviews the regulatory history for nitrogen oxides (NO_x) pollutant emissions from stationary sources, primarily in coal-fired power plants. Nitrogen dioxide (NO₂) is one of the six criteria pollutants regulated by the 1970 Clean Air Act where National Ambient Air Quality Standards were established to protect public health and welfare. We use patent data to show that in the cases of Japan, Germany, and the United States, innovations in NO_x control technologies did not occur until stringent government regulations were in place, thus “forcing” innovation. We also demonstrate that reductions in the capital and operation and maintenance (O&M) costs of new generations of high-efficiency NO_x control technologies, selective catalytic reduction (SCR), are consistently associated with the increasing adoption of the control technology: the so-called learning-by-doing phenomena. The results show that as cumulative world coal-fired SCR capacity doubles, capital costs decline to ~86% and O&M costs to 58% of their original values. The observed changes in SCR technology reflect the impact of technological advance as well as other factors, such as market competition and economies of scale.     

Analysis of PV module connected in different configurations under uniform and non-uniform solar radiations

This paper focuses on investigating the current--voltage (I--V) and power--voltage (P--V) characteristics of a photovoltaic (PV) module connected in various configurations like series, parallel, and series-parallel. The performance analysis of PV module has been carried out under uniform and non-uniform conditions such as change in irradiation (passing clouds), change in temperature, accumulation of dust, and change in wind speed using MATLAB-Simulink environment. From the observed results, it has been indicated that for a given number of PV modules, the array configurations affect the maximum available output power and more local maxima are found under partially shaded conditions. Moreover, the comparative analysis of PV module has been performed for various configurations under the above disturbances. From the results, it is evident that even under non-uniform conditions, the parallel configuration of PV modules is more prominent and maximum output power is obtained. Further, parallel layout is particularly convenient for minimizing shadowing effects. The parameters of the PV module have been obtained from the manufacturer datasheet (KC200GT) for these investigations.     

DNAPL Source Depletion: 2. Attainable Goals and Cost–Benefit Analyses

It is difficult to quantify the range in source strength reduction (MdR) that may be attainable from in situ remediation of a dense nonaqueous‐phase liquid (DNAPL) site given that available studies typically report only the median MdR without providing insights into site complexity, which is often a governing factor. An empirical study of the performance of in situ remediation at a wide range of DNAPL‐contaminated sites determined MdRs for in situ bioremediation (EISB), in situ chemical oxidation (ISCO), and thermal treatment remedies. Median MdR, geometric mean MdR, and lower/upper 95 percent confidence interval for the mean were: 49x, 105x, 20x/556x, respectively, for EISB; 9x, 21x, and 4x/110x for ISCO; and 19x, 31x, and 6x/150x for thermal treatment. Lower MdR values were determined for large, complex sites and for sites with DNAPL pool‐dominated source zones. A feasibility analysis of partial DNAPL depletion is described for a pool‐dominated source zone. Back‐diffusion from low‐hydraulic conductivity units within a pool‐dominated source zone is shown to potentially sustain a secondary source for more than 1,000 years, indicating that aggressive source treatment may not reduce the remediation timeframe. Estimated plume response demonstrates there may be no reduction in cost associated with aggressive treatment, and little difference in risk reduction associated with the various alternatives. Monitored natural attenuation (MNA) for the source zone is shown to be a reasonable alternative for the pool‐dominated source zone considered in this example. It is demonstrated that pool‐dominated source zones with a large range in initial DNAPL mass (250 to 1,500 kg) may correspond to a narrow range in source strength (20 to 30 kg/year). This demonstrates that measured source strength is nonunique with respect to DNAPL mass in the subsurface and, thus, source strength should not be used as the sole basis for predicting how much DNAPL mass remains or must be removed to achieve a target goal. If aggressive source zone treatment is to be implemented due to regulatory requirements, strategic pump‐and‐treat is shown to be most cost effective. These remedial decisions are shown to be insensitive to a range of possible DNAPL pool conditions. At sites with an existing pump‐and‐treat system, a significant increase in mass removal and source strength reduction may be achieved for a low incremental cost by strategic placement of extraction wells and pumping rate selection. © 2014 Wiley Periodicals, Inc.     

Arsenic Background Definition: Introduction and Objectives

Produced water samples from the Bacia de Campos oil field offshore Pargo and Pampo platforms were analyzed for Ba, 226 Ra, 228 Ra, V, Ni and Pb. The activity concentrations measured were in the range of 1.6-6.0 Bq/L for 226 Ra and 0.7-8.2 Bq/L for 228 Ra for both platforms. For Ba, V, Ni and Pb the concentrations measured were in the range of 5.6-25.7 mg/L, 0.15-0.46 µg/L, 4.85-12.14 µg/L and 4.04-12.37 µg/L. A strong correlation between barium and radium isotopes concentration was observed ( 226 Ra: R 2 = 0.897; 228 Ra: R 2 = 0.737). In order to evaluate the environmental impact from discharges of produced water into the sea, the seawater and sediment samples were collected at distances from 250 to 1000 m around the platforms. The seawater samples were analyzed for dissolved and particulate material and the sediment samples for total and leachable fraction. The results show that even for the shortest sampling distance (250 m) from the discharge point, Ba, 226 Ra, 228 Ra, V, Ni and Pb concentrations in seawater and sediment were similar to the local background, indicating that dispersion by local currents minimizes any environmental impact involving these parameters.     

An In Situ Bioreactor for the Treatment of Petroleum Hydrocarbons in Groundwater

Two pilot tests of an aerobic in situ bioreactor (ISBR) have been conducted at field sites contaminated with petroleum hydrocarbons. The two sites differed with respect to hydrocarbon concentrations. At one site, concentrations were low but persistent, and at the other site concentrations were high enough to be inhibitory to biodegradation. The ISBR unit is designed to enhance biodegradation of hydrocarbons by stimulating indigenous microorganisms. This approach builds on existing Bio‐Sep^® bead technology, which provides a matrix that can be rapidly colonized by the active members of the microbial community and serves to concentrate indigenous degraders. Oxygen and nutrients are delivered to the bioreactor to maintain conditions favorable for growth and reproduction, and contaminated groundwater is treated as it is circulated through the bed of Bio‐Sep^® beads. Groundwater moving through the system also transports degraders released from Bio‐Sep^® beads away from the bioreactor, potentially increasing biodegradation rates throughout the aquifer. Groundwater sampling, Bio‐Traps, and molecular biological tools were used to assess ISBR performance during the two pilot tests. Groundwater monitoring indicated that contaminant concentrations decreased at both sites, and the microbial data suggested that these decreases were due to degradation by indigenous microorganisms rather than dilution or dispersion mechanisms. Taken together, these lines of evidence showed that the ISBR system effectively increased the number and activity of indigenous microbial degraders and enhanced bioremediation at the test sites. © 2013 Wiley Periodicals, Inc.     

How do soil and water conservation practices influence climate change impacts on potato production? Evidence from eastern Canada

We used a stochastic production function method together with a farm-level dataset covering 18 farms over a 23-year period to assess the role that soil and water conservation practices play in affecting the climate change impacts on potato yield in northwestern New Brunswick, Canada. Our analysis accounted for the yield effects of farm inputs, farm technologies, farm-specific factors, seasonal climatic variables, soil and water conservation practices, and a series of interaction terms between soil and water conservation practices and climatic variables. Regression results were used in combination with three climate change scenarios developed by the Intergovernmental Panel on Climate Change (A2, A1B, B1) and four general circulation model predictions over three 30-year time periods (2011–2040, 2041–2070, and 2071–2100) to estimate a range of potato yield projections over these time periods. Results show that accounting for soil and water conservation practices in climate–yield relationships increased the impacts of climate change on potato yield, with yield increases of up to 38 % by the 2071–2100 period. These findings provide evidence that adoption of soil and water conservation practices can help boost potato production in a changing Canadian climate.     

Duo-molecularly imprinted polymer-coated magnetic particles for class-selective removal of endocrine-disrupting compounds from aqueous environment

The removal of steroid and phenolic endocrine-disrupting compounds (EDCs) from an aqueous environment was investigated using magnetic particles encapsulated by a duo-molecularly imprinted polymer (duo-MIP). The effect of environmental variables on the binding efficiency was studied. Experimental results showed that the amount of EDCs adsorbed was neither affected by up to 10.0 mM NaCl nor significantly interfered by up to 10.0 mg/L humic acid. Negligible influence was observed from pH 3.3 to pH 6.8, but a decrease started at pH 9. Freundlich isotherm parameters indicated binding capacities in the order of DES?>?E2?～?E1?>?BPA. The applicability of class-selective removal was verified using river water samples spiked with these EDCs at 10 μg/L; the binding efficiencies were 90, 90, 88, and 98 % for estrone (E1), 17β-estradiol (E2), bisphenol A (BPA), and diethylstilbestrol (DES), respectively. A reuse investigation verified constant binding capacities exhibiting <2 % reduction after seven cycles of regeneration.     

Liver lesions in demersal fishes near a large ocean outfall on the San Pedro Shelf, California

The prevalence of toxicopathic liver lesions in demersal fish on the San Pedro Shelf, California was determined for a 15-year period (1988–2003). Fish livers were sampled at fixed locations as part of the Orange County Sanitation Districts (OCSD) ocean monitoring program. Histopathological examination of selected fish liver tissues was studied to determine whether the wastewater discharge had affected fish health. The prevalence of toxicopathic lesion classes neoplasms (NEO), preneoplastic foci of cellular alteration (FCA), and hydropic vacuolation (HYDVAC) varied among species and locations. For all species sampled, severe lesions occurred in 6.2% of the fish examined (n = 7,694). HYDVAC (4.1%) was the most common toxicopathic lesion type followed by FCA (1.4%) and NEO (0.7%). HYDVAC occurred only in white croaker (Genyonemus lineatus), accounting for 84.8% of the toxicopathic lesions for this species. Prevalence of HYDVAC, NEO, and FCA in white croaker was 15.2, 2.0, and 0.7%, respectively. The prevalence of HYDVAC and NEO in white croaker increased with age and size but there was no sexual difference. A linear regression model was used for hypothesis testing to account for significant differences in fish size (and age for croakers) at the different sampling locations. This analysis showed that for HYDVAC there was no spatial or location effect for lesion rate or size/age of onset. For NEO, the model predicted that white croaker near the wastewater outfall may acquire these lesions at a smaller size/younger age, and at a higher rate, than at other sites. However, this result may be biased due to the unequal size frequency distributions and the low prevalence of NEO in white croaker at the different sampling sites. Bigmouth sole (Hippoglossina stomata) had a prevalence of FCA and NEO of 1.3 and 0.35%, respectively, but the prevalence and distribution of lesions was too few for statistical testing. There was no sexual difference for lesion prevalence in hornyhead turbot (Pleuronichthys verticalis) and the prevalence of FCA and NEO was 3.4 and 0.37%, respectively. FCA prevalence increased with size in hornyhead turbot and there were no significant spatial differences for lesion rates and fish size at lesion onset. Overall, consistent spatial differences for lesion prevalence were not demonstrated and highlight the analytical difficulties of detecting a possible point source impact when the effect is rare, correlated with the size/age structure of the population, and may be caused by exposure to unknown multiple sources. Thus, the usefulness of liver histopathology as a point-source monitoring tool is best applied to where the spatial scale of impact generally exceeds the home range of the target species.