Evaluation of the Global Precipitation Measurement (GPM) Satellite Rainfall Products over the Lower Colorado River Basin,Texas

Quality of precipitation products from the Integrated Multi‐satellitE Retrievals for Global Precipitation Measurement mission (IMERG) was evaluated over the Lower Colorado River Basin of Texas. Observations of several rainfall events of a wide range of magnitudes during May 2015 by a very dense network of 241 rain gauges over the basin were used as a reference. The impact of temporal and spatial downscaling of different satellite products (near/post‐real‐time) on their accuracy was studied. Generally, all IMERG products perform better when the temporal and spatial resolutions are downscaled. The Final product shows relatively better performance compared to the near‐real‐time products in terms of basic performance measures; however, regarding rainfall detection, all products show nearly similar performance. When considering rainfall detection, IMERG adequately captures the precipitation events; however, in terms of spatial patterns and accuracy, more improvements are needed. IMERG products analysis results may help developers gain insight into the regional performance of the product, improve the product algorithms, and provide information to end users on the products’ suitability for potential hydrometeorological applications. Overall, the IMERG products, even the uncalibrated product at its finest resolution, showed reasonable performance indicating their great potential for applications such as water resources management, prevention of natural disasters, and flood forecasting.     

Rheological Investigation of Wood-Polypropylene Composites in Rotational Plate Rheometer

In this research work, the rheological properties of Wood-Plastic Composites (WPC) with some selected compositions are investigated. WPC is being recognized as a green composite that, in the past 20?years, has emerged to a commercial product. A study on rheological properties of these materials can give insight into the proper selection of composition and processing condition. Two grades of polypropylene (PP) with two different melt flow indexes (MFI) were selected to prepare WPCs with three different wood contents (50, 60 and 70?% wt.). Four types of rheological experiments were performed utilizing a rotational plate rheometer: (1) strain sweep, (2) frequency sweep, (3) temperature sweep and (4) steady shear rate sweep. The independent variables were chosen as wood content, MFI of polymer (two types), melt temperature, frequency or shear rate, the gap between the plates, and strain percentage. The strain sweep tests specified the linear and non-linear viscoelastic zones of each experiment. The results of frequency sweep experiments indicated that increasing the wood content and frequency and also decreasing the strain percentage and the gap distance, lead to an increase in the storage modulus. Regarding the loss modulus, wood percentage and the gap distance presented positive effects and strain percentage showed a negative effect. The behavior of complex viscosity was almost similar to that of the storage modulus but increasing the frequency caused a decrease in the complex viscosity. In case of temperature sweep experiments, it was observed that the rheological properties exhibit a rapid change near to a temperature of 160?°C. The results also showed that beyond this point, increasing the wood content and also MFI of polypropylene caused an increase in the storage modulus. The results of steady shear rate sweep experiments specified that increasing wood content and also decreasing the MFI of PP, the gap distance and shear rate lead to an increase in both viscosity and shear stress.     

Perfluoroalkane acids in human milk under the global monitoring plan of the Stockholm Convention on Persistent Organic Pollutants (2008–2019)

● Perfluorooctanesulfonic acid and perfluorooctanoic acid highest in human milk. ● All other perfluoroalkane substances had median values of zero (101 samples). ● Branched PFOS recommended to be analyzed separately from linear isomer. ● PFOS and PFOA showed differentiated regional and income distribution. ● Human health risk assessment values not yet available at global level. Within the global monitoring plan (GMP) established by article 16 of the Stockholm Convention on Persistent Organic Pollutants, perfluorooctane sulfonic acid (PFOS), perfluorooctanoic acid (PFOA), and perfluorohexane sulfonic acid (PFHxS) are recommended for analysis in core matrices to assess occurrence and changes geographically and with time. In 101 samples consisting of 86 national pools and 15 pools from States in Brazil obtained between 2008 and 2019, PFHxS was detected in 17% of the national pools and none in Brazil. PFOA and PFOS had a detection frequency of 100% and 92%, respectively. Other perfluoroalkane substances (PFAS) had either low detection frequencies and median values of zero (carboxylic acids C₄–C₁₁; except PFOA) or could not be quantified in any sample (sulfonic acids, C₄–C₁₀, and long-chain carboxylic acids, C₁₂–C₁₄). Correlation between PFOA and PFOS was moderately (r = 0.58). Whereas median values were almost identical (18.9 pg/g f.w. for PFOS; 18.6 pg/g f.w. for PFOA), PFOS showed larger ranges (< 6.2 pg/g f.w.–212 pg/g f.w.) than PFOA (< 6.2 pg/g f.w.–63.4 pg/g f.w.). It was shown that wealthier countries had higher PFOA concentrations than poorer countries. No difference in concentrations was found for samples collected in countries having or not having ratified the Stockholm Convention amendments to list PFOS or PFOA. The goal to achieve 50% decrease in concentrations within ten years was met by Antigua and Barbuda, Kenya, and Nigeria for PFOS and by Antigua and Barbuda for PFOA. In a few cases, increases were observed; one country for PFOS, four countries for PFOA.     

Noble metal catalysts for methane removal

Using a bench-scale rig, the activities of Pt, Pd and Pt+Pd catalysts supported on gamma-Al(2)O(3) and on TiO(2) (anatase) for the complete oxidation of methane (300 ppmv) in air have been measured as a function of temperature; values of T(10), T(50) and T(90) together with the Arrhenius parameters (activation energy and pre-exponential factor) are reported. Pt is less active than Pd when deposited on the surface of the TiO(2), but more active when deposited on gamma-Al(2)O(3), however when combined, the Pt+Pd mixture is more active than either metal individually. The T(10) for Pt+Pd/gamma-Al(2)O(3) was being as low as 228 degrees C. The significance of the Arrhenius parameters, for metal containing catalysts is that they exhibit compensation with increasing activation energy, while securing a more rapid increase in conversion from 0% to 100% when the temperature is increased.     

Preparation and properties of chitosan–metal complex: Some factors influencing the adsorption capacity for dyes in aqueous solution

Chitosan–metal complexes have been widely studied in wastewater treatment, but there are still various factors in complex preparation which are collectively responsible for improving the adsorption capacity need to be further studied. Thus, this study investigates the factors affecting the adsorption ability of chitosan–metal complex adsorbents, including various kinds of metal centers, different metal salts and crosslinking degree. The results show that the chitosan–Fe( Ⅲ) complex prepared by sulfate salts exhibited the best adsorption efficiency(100%) for various dyes in very short time duration(10 min), and its maximum adsorption capacity achieved 349.22 mg/g. The anion of the metal salt which was used in preparation played an important role to enhance the adsorption ability of chitosan–metal complex. SO_4~(2-) ions not only had the effect of crosslinking through electrostatic interaction with amine group of chitosan polymer, but also could facilitate the chelation of metal ions with chitosan polymer during the synthesis process.Additionally, the p H sensitivity and the sensitivity of ionic environment for chitosan–metal complex were analyzed. We hope that these factors affecting the adsorption of the chitosan–metal complex can help not only in optimizing its use but also in designing new chitosan–metal based complexes.     

Characterization and Optimization of Persian Gum/Whey Protein Bionanocomposite Films Containing Betanin Nanoliposomes for Food Packaging Utilization

Journal of Polymers and the Environment - In this study, composite packaging films were produced from relatively inexpensive materials including Whey protein isolate (WPI) and Persian gum (PG),...     

Health risk of arsenic in the alluvial aquifers of Lahore and Raiwind,Punjab Province,Pakistan: an investigation for safer well water

Environmental pollution has generated release of high amounts of arsenic (As) which ultimately are detected in the water of Indus Basin Punjab, Pakistan. The area is characterized by a semiarid climate, and alluvial deposits. This investigation, an extension of previously reported As-affected area in Lahore and Kasur, aimed to (1) assess the extent of water contamination in this area and (2) determine possible safer sites for future water use. In a comparative study, total As contamination of underground water from individual dwellings and community water supply of some villages located at the boundary of the Sheikhopura and Lahore districts, Pakistan were measured to compare with previously published data of villages located at the boundary of the Lahore and Kasur districts. The results showed variable levels of As in shallow drinking water wells and average concentration exceeding WHO guidelines value. As levels ranged from below 5.2 to 80 µg/L and mean 45.5 µg/L. The As concentrations were higher than WHO limits but lower than previous studied area. In addition, high salinity was found to be a serious concern for deteriorating groundwater quality rendering it unsuitable for drinking. Groundwater is predominantly of the Na–HCO₃ type with slightly alkaline pH. High pH values and competition of As with HCO₃ may serve as an important process for mobilization of As in the shallow groundwater of the region. Continuous monitoring and expansion of monitoring systems are necessary to establish safer wells within As-contaminated areas.     

Optimization and treatment of wastewater of crude oil desalting unit and prediction of scale formation

In this article, one of Iran’s southwest oil fields that produces 3200 barrels per day (bbl/d) of wastewater from oil and gas processing was investigated. Experimental analysis of oil reservoir water and desalting wastewater disposal of crude oil desalting unit was performed. First, water was treated with a reverse osmosis membrane. As a result, the purified water, with lower total dissolved solids (TDS) and pH, was a suitable candidate for injection into the adjacent wells of the crude oil desalting unit. The effectiveness and compatibility of this wastewater to the formation water of the oil field wells were simulated. Finally, we studied and identified the formation, the amount, and the type of mineral scale deposits. These are the most important problems during water injection into the wells. The analysis shows that the refined water from the reverse osmosis (RO) process was a suitable and low-cost economical option for injection in onshore and offshore fields, due to the low amount of salts, the concentration of susceptible ions in scaling formation, and the appropriate pH. This oil field, which is in the second half of life, requires enhanced oil recovery methods (EOR) for the maintenance of pressure and an increase in oil recovery.

     

A fuzzy multi-stakeholder multi-criteria methodology for water allocation and reuse in metropolitan areas

In this paper, a fuzzy decision making methodology is proposed to find a socially optimal scenario for allocating effluent of wastewater treatment plants and urban and suburban runoffs to agricultural regions and recharging aquifers. The presented methodology named modified fuzzy social choice (MFSC) considers multi-stakeholder multi-criteria problems under uncertainties inherent in a decision making process utilizing a fuzzy ranking method and the fuzzy social choice (FSC) theory. A set of water and wastewater allocation scenarios are proposed for water quantity and quality management of the study area, while six main stakeholders with conflicting utilities and different negotiation powers are involved. The proposed methodology is applied to Tehran metropolitan area, the capital city of Iran with the population of about 8 million people, to examine its applicability and effectiveness. The results shows that using fuzzy multi-stakeholder multi-criteria decision making method considering equal and different negotiation powers can lead to different outcomes. Based on the results, the MFSC method, which considers a number of decision makers having different negotiation powers, degrees of importance of decision making criteria, and some important uncertainties, performs more promising in real water resources management problems.     

Economic growth and environmental pollution in Myanmar: an analysis of environmental Kuznets curve

Environmental Science and Pollution Research - This empirical study examines the short- and long-run relationship between GDP as an economic growth indicator and CO2 emissions as an environmental...