Salinity increases mobility of heavy metals in soils

The effect of salinity induced by CaCl₂, MgCl₂, NaCl and Na₂SO₄ on the mobility of Cu, Cd, Pb and Zn was studied. An increase of ionic strength by any salts promoted a higher release of Cd than the others metals. When CaCl₂ and NaCl were applied, Cd and Pb showed the highest degree of mobilization. When MgCl₂ was applied, Cd and Cu were mobilized the most. Finally, an increase of Na₂SO₄ also promoted the strongest mobilization of Cd and Cu.As the total heavy metal content was higher, the percentage of Pb and Cu released upon salinization decreased, indicating that these metals are strongly bound to soil constituents. An increase of carbonates in the soil promoted a higher release of Pb for all used salts and for Zn when MgCl₂ and NaCl were used. This indicates that Pb and Zn are adsorbed on the surface of carbonate crystals. An increase of fine particles promoted a decrease of percentage of released Cd for all salts, indicating that Cd is strongly retained in the fine fractions.The main mechanism regulating Pb and Cd mobility was competition with Ca²⁺ for sorption sites followed for metal chloro-complexation, association between the Cd/Pb-sulfates and competition with Mg²⁺. The main mechanism regulating Cu mobility was the formation of Cu-sulfate, followed by competition with cations (Mg > Ca) and chloride. For Zn, competition with Ca²⁺ for sorption sites was the most important process for its mobility; followed by Zn-sulfate association and, finally, chloride and competition with Mg with the same effect.     

Mobility of Cd and Cu in formulated sediments coated with iron hydroxides and/or humic acids: a DGT and DGT-PROFS modeling approach

The diffusive gradients technique in thin films (DGT) was used to investigate the kinetic resupply of Cd and Cu to pore water from the solid phase. For the sake of simplification, experiments were performed using formulated sediments that differed in the presence or absence of humic acids (HA) and/or of iron hydroxides (i.e., goethite and ferrihydrite). The effects of the time after the contamination of the solid phase (aging effect) on formulated sediments that were coated with goethite and HA and spiked with Cd were also evaluated. Kinetic DGT results were interpreted using the newly developed, multi-compartmental model DGT-PROFS.Due to Cu humate formation, the addition of HA slightly increased the Cu concentration in the pore water independent of the effect of the iron hydroxide coating on the formulated sediments and slightly decreased that of Cd. The impact of 8-190 d of aging resulted in a significant decrease in the Cd concentration of the pore water over an increasing incubation time.Modeling our results with DGT-PROFS led to the following conclusions concerning the impact of HA and iron hydroxides on Cd and Cu availability. First, in the presence of HA and absence of iron hydroxides, Cd is associated mainly with weak sites, while Cu is bound to strong sites. Similarly, in the presence of both iron hydroxides and HA, Cu appeared to be more heavily associated with the strong sites than did Cd. When the incubation time increased from 8 to 190 d, a proportion of Cd initially adsorbed onto weak sites transferred to the strong sites, suggesting that the adsorption of Cd on sediments is controlled partially by slow kinetic processes.     

Inside-sediment partitioning of PAH, PCB and organochlorine compounds and inferences on sampling and normalization methods

Comparability of sediment analyses for semivolatile organic substances is still low. Neither screening of the sediments nor organic-carbon based normalization is sufficient to obtain comparable results. We are showing the interdependency of grain-size effects with inside-sediment organic-matter distribution for PAH, PCB and organochlorine compounds. Surface sediment samples collected by Van-Veen grab were sieved and analyzed for 16 PAH, 6 PCB and 18 organochlorine pesticides (OCP) as well as organic-matter content. Since bulk concentrations are influenced by grain-size effects themselves, we used a novel normalization method based on the sum of concentrations in the separate grain-size fractions of the sediments. By calculating relative normalized concentrations, it was possible to clearly show underlying mechanisms throughout a heterogeneous set of samples. Furthermore, we were able to show that, for comparability, screening at <125 μm is best suited and can be further improved by additional organic-carbon normalization.     

N deposition as a threat to the World's protected areas under the Convention on Biological Diversity

This paper combines the world’s protected areas (PAs) under the Convention on Biological Diversity (CBD), common classification systems of ecosystem conservation status, and current knowledge on ecosystem responses to nitrogen (N) deposition to determine areas most at risk. The results show that 40% (approx. 11% of total area) of PAs currently receive >10 kg N/ha/yr with projections for 2030 indicating that this situation is not expected to change. Furthermore, 950 PAs are projected to receive >30 kg N/ha/yr by 2030 (approx. twice the 2000 number), of which 62 (approx. 11,300 km²) are also Biodiversity Hotspots and G200 ecoregions; with forest and grassland ecosystems in Asia particularly at risk. Many of these sites are known to be sensitive to N deposition effects, both in terms of biodiversity changes and ecosystem services they provide. Urgent assessment of high risk areas identified in this study is recommended to inform the conservation efforts of the CBD.     

Mass balances and life cycle inventory of home composting of organic waste

A comprehensive experimental setup with six single-family home composting units was monitored during 1 year. The composting units were fed with 2.6-3.5 kg organic household waste (OHW) per unit per week. All relevant consumptions and emissions of environmental relevance were addressed and a full life-cycle inventory (LCI) was established for the six home composting units. No water, electricity or fuel was used during composting, so the major environmental burdens were gaseous emissions to air and emissions via leachate. The loss of carbon (C) during composting was 63-77% in the six composting units. The carbon dioxide (CO(2)) and methane (CH(4)) emissions made up 51-95% and 0.3-3.9% respectively of the lost C. The total loss of nitrogen (N) during composting was 51-68% and the nitrous oxide (N(2)O) made up 2.8-6.3% of this loss. The NH(3) losses were very uncertain but small. The amount of leachate was 130 L Mg(-1) wet waste (ww) and the composition was similar to other leachate compositions from home composting (and centralised composting) reported in literature. The loss of heavy metals via leachate was negligible and the loss of C and N via leachate was very low (0.3-0.6% of the total loss of C and 1.3-3.0% of the total emitted N). Also the compost composition was within the typical ranges reported previously for home composting. The level of heavy metals in the compost produced was below all threshold values and the compost was thus suitable for use in private gardens.     

Biodegradable Water Soluble Copolymer for Antimicrobial Applications

Synthesis and characterization of novel biodegradable, water soluble and optically active DL-malic acid (DMA) and citric acid (CA) copolymers were studied for possible use as antibacterial agents. The copolymers were synthesized by direct bulk melt condensation in the absence of a catalyst above 150 °C. Characterization of obtained copolymers was carried out with the help of infrared absorption spectra, differential scanning calorimetry and thermo gravimetric analysis. The antibacterial activity of copolymers against bacteria was investigated. The results obtained shows the above copolymers possess a broad wound dressing activity against different types of bacteria and may be useful as antibacterial agents.     

Effect of Ionizing Radiation on the Morphological,Thermal and Mechanical Properties of Polyvinyl Alcohol/Polyethylene Glycol Blends

Blends of water—soluble polymers based on Poly vinyl alcohol (PVA) and Polyethylene glycol (PEG) have been prepared by the solution casting technique. The effect of various doses of γ-radiation on the structural properties of PVA/PEG polymer blends with all its compositions has been investigated. From the visual observation of all the blend compositions, it was found that, the best compatibility of the blend is up to 40% PVA/60%PEG. The structure–Property behavior of all the prepared blends before and after γ-irradiation was investigated by IR Spectroscopy, thermogravimetric analysis (TGA), mechanical properties and Scanning electron microscope (SEM). The gel content and the swelling behavior of the PVA/PEG blends were investigated. It was found that the gel content increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of PEG increased in the blend. The results obtained by FTIR analysis and SEM confirm the existence of possible interaction between PVA and PEG homopolymers. TGA of PVA/PEG blend, before and after γ-irradiation, showed that the unirradiated and irradiated PVA/PEG blends are more stable against thermal decomposition than pure PVA. Improvement in tensile mechanical properties of PVA/PEG blends was occurred.     

The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

Kinetic Study of Biopolymer (PHB) Synthesis in <Emphasis Type="Italic">Alcaligenes</Emphasis> sp. in Submerged Fermentation Process Using TEM

Poly-β-hydroxybuyrate (PHB) is a carbon—energy storage material which is accumulated as intracellular granule in variety of microorganism under nutrient starved conditions. Solid PHB is a biodegradable thermoplastic polymer and is utilizable in various ways similar to many conventional plastics. Ralstonia eutropha (Alcaligenes sp.), a gram negative bacteria accumulates PHB as insoluble granules inside the cells when nutrients other than carbon are limited. In this report effort has been made to analyze PHB granule synthesis inside Alcaligenes sp. NCIM 5085 by transmission electron microscopy and qualitative estimation of PHB was carried out by fourier transform infrared spectroscopy which provide better precision compared to other conventional techniques previously applied for PHB determination. Maximum PHB concentration of 2.20 ± 0.40 g/L and cell biomass of 3.42 ± 0.20 g/L was obtained after 48.0 h of fermentation. Leudking-Piret equation deduced mixed growth associated product formation which varies from earlier reports.     

Impacts of climatic disasters in coastal Bangladesh: why does private adaptive capacity differ?

This paper quantitatively assesses the influences of various demographic and socio-economic factors, past adaptive behavioral factors, access to weather/climate information, and spatial/locational factors on coastal populations’ perceived adaptive capacity against major impacts of hydro-meteorological disasters on their livelihood. A total of 285 respondents from three coastal villages in Bangladesh were randomly interviewed between January and April 2009. Respondents rated their perceived adaptive capacity against 25 anticipated impacts of sea-level rise (SLR)-induced events on their livelihood. By employing the principal component analysis (PCA), perceived adaptive capacity was grouped into five major categories. Then, an adaptive capacity index for each of five major impacts, namely, “infrastructure damage and disrupted mobility,” “food and nutritional insecurity,” “low earning and higher cost of maintenance,” “loss of employment in offshore activities,” and “crisis of potable water and public health risk,” was prepared. How adaptive capacity against each of these major five categories of impacts differs due to the influence of various factors was assessed by employing the multivariate analysis of variance (MANOVA) technique. The MANOVAs show that age, sex, level of education, type of occupation, farmland holdings, past adaptive behavior against rainfall, salinity intrusion, freshwater crises, use of radio for weather information, and the distance of the homestead from the shoreline have varying levels of influence on respondents’ perceived adaptive capacity against each of the five major categories of impacts. Others factors have moderate to limited influences. The policy implication is that specific programs, rather than a generic one-size fits all program, must be initiated for enhancement of adaptive capacity against specific impacts.