Removal of PCDD/F from flue gases in fixed or moving bed adsorbers

Whereas the PCDD/F-abatement in MSWIs is mostly achieved through entrained-phase adsorption upon activated carbon, the other thermal processes are more bending towards fixed/moving bed adsorption or catalytic destruction. The treatment of entrained-phase adsorption has been previously dealt with. The present paper focuses upon fixed/moving bed adsorption as abatement alternative. The characteristics of granular carbonaceous adsorbents are reviewed and commented upon, and stress some advantages of the fixed/moving bed operation. The equilibrium adsorption characteristics are expressed in terms of the number of active sites of the adsorbent and its saturation capacity. The breakthrough calculations for a fixed/moving bed adsorber are based upon these adsorption characteristics and expressed in terms of the relevant operating parameters of the flue gases to be treated. Although detailed literature data on these adsorbers are scarce, application of the design equations predicts meaningful results, thus demonstrating the predictive capacity of the design method.     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Dissolved phosphorus retention and release from a coastal plain in-stream wetland

Dissolved phosphorus (DP) can be released from wetlands as a result of flooding or shifts in water column concentrations. Our objectives were to determine the long-term (1460 d) DP retention and release characteristics of an in-stream wetland, and to evaluate how these characteristics respond to flooding, draining, and changes in DP concentrations. The studied in-stream wetland drains an agriculturally intensive subwatershed in the North Carolina Coastal Plain region. The wetland's DP retention and release characteristics were evaluated by measuring inflow and outflow DP concentrations, DP mass balance, and DP movement across the sediment-water column interface. Phosphorus sorption isotherms were measured to determine the sediment's equilibria P concentration (EPCo), and passive samplers were used to measure sediment pore water DP concentrations. Initially, the in-stream wetland was undersized (0.31 ha) and released 1.5 kg of DP. Increasing the in-stream wetland area to 0.67 ha by flooding resulted in more DP retention (28 kg) and low outflow DP concentrations. Draining the in-stream wetland from 0.67 to 0.33 ha caused the release of stored DP (12.1 kg). Shifts both in sediment pore water DP concentrations and sediment EPCo values corroborate the release of stored DP. Reflooding the wetland from 0.33 to 0.85 ha caused additional release of stored DP into the outflowing stream (10.9 kg). We conclude that for a time period, this in-stream wetland did provide DP retention. During other time periods, DP was released due to changes in wetland area, rainfall, and DP concentrations.     

Field dissipation of acetochlor in two New Zealand soils at two application rates

The persistence of pesticides in soils has both economic and environmental significance and is often used as a key parameter in pesticide risk assessment. Persistence of acetochlor [2'-ethyl-6'-methyl-N-(ethoxymethyl)-2-chloroacetylanilide] in two New Zealand field soils was measured over two years and the data were used to identify models that adequately describe acetochlor persistence in the field. Acetochlor was sprayed onto six fallow plots (3 x 9 m each) at each site at the recommended rate (2.5 kg a.i. ha(-1)) and at twice that rate. Acetochlor concentrations were measured in soil cores. Simple first-order kinetics (Model 1) adequately described acetochlor persistence in Hamilton clay loam soil (Humic Hapludull, Illuvial Spadic) at the high application rate, but overestimated it at the low application rate. A quadratic model (Model 2), a first-order double-exponential model (Model 3), a first-order biphasic model (Model 4), or a two-compartment model (Model 5) better described acetochlor persistence at the low application rate. The time for 50% (DT50) and 90% (DT90) of initial acetochlor loss was approximately 9 and 56 d, and 18 and 63 d at low and high application rates, respectively. The more complex Models 2 through 5 also better described the biphasic dissipation of acetochlor in Horotiu sandy loam soil (Typic Orthic Allophanic) than Model 1, with Model 1 significantly underestimating acetochlor concentrations on the day of application at both application rates. The DT50 and DT90 values were 5 and 29 d and 7 and 31 d at low and high application rates, respectively. Overall, application rate significantly affected the DT50 and DT90 values in the Hamilton soil, but not in the Horotiu soil. Faster acetochlor loss in the Horotiu soil possibly resulted from the higher soil organic carbon content that retained more acetochlor near the soil surface where higher temperature and photolysis accelerated the loss.     

Multicriteria evaluation of simulated logging scenarios in a tropical rain forest

Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.     

Behavioural and physiological responses of the Norway lobster,<Emphasis Type="Italic"> Nephrops norvegicus</Emphasis> (Crustacea: Decapoda), to sulphide exposure

The Norway lobster, Nephrops norvegicus, is moderately tolerant of sulphide [the lethal time to 50% mortality (LT₅₀) was 22.5 h when exposed to 500 M sulphide] but, whenever possible, it attempts to avoid the presence of sulphide in its immediate vicinity. Any sulphide entering the animal is oxidized to thiosulphate, which accumulates in the haemolymph and in the tissues. During exposure to low concentrations of sulphide, the rate of oxygen consumption is maintained or even enhanced even though the lobsters become quiescent. The apparent increase in oxygen consumption is probably due to the oxidation of sulphide to thiosulphate. At higher concentrations, oxygen consumption decreases, perhaps because of the inhibitory effect of sulphide on electron transport, and N. norvegicus resorts to anaerobic metabolism as indicated by the accumulation of lactate in the haemolymph and in the tissues.Communicated by L. Hagerman, Helsingør     

Air pollution and forest health: toward new monitoring concepts

It is estimated that 49% of forests (17 million km(2)) will be exposed to damaging concentrations of tropospheric O(3) by 2100. Global forest area at risk from S deposition may reach 5.9 million km(2) by 2050, despite SO(2) emission reductions of 48% in North America and 25% in Europe. Although SO(2) levels have decreased, emissions of NO(x) are little changed, or have increased slightly. In some regions, the molar SO(4)/NO(3) ratio in precipitation has switched from 2/1 to near 1/1 during the past two decades. Coincidentally, pattern shifts in precipitation and temperature are evident. A number of reports suggest that forests are being affected by air pollution. Yet, the extent to which such effects occur is uncertain, despite the efforts dedicated to monitoring forests. Routine monitoring programmes provide a huge amount of data. Yet in many cases, these data do not fit the conceptual and statistical requirements for detecting status and trends of forest health, nor for cause-effect research. There is a clear need for a re-thinking of monitoring strategies.     

Bronchial dosimeters for radon progeny for Chinese males and females

Bronchial dosimeters have been designed for adult Chinese males and females for home and mine exposures, which can give the bronchial doses from radon progeny by direct measurements. The bronchial dosimeter for home exposures consists of five 400-mesh wire screens. With a sampling face velocity of 3.3 cm s(-1) for Chinese males and 2.7 cm s(-1) for Chinese females, the deposition pattern on the wire screens were found to satisfactorily match the variation of the dose conversion coefficients (in units of mSv WLM(-1)) with the size of radon progeny from 1 to 1000 nm. The bronchial dosimeter for mine exposures consists of four 250-mesh wire screens. With a sampling face velocity of 3.3 cm s(-1), the deposition pattern on the wire screens were found to satisfactorily match the variation of the dose conversion coefficients for both Chinese males and females. In this way, the bronchial dosimeters directly give the bronchial doses from the alpha counts recorded on the wire-screens.     

Heavy metal levels and esterase variations between metal-exposed and unexposed duckweed Lemna minor: field and laboratory studies

Environmental homogeneity is being continuously disturbed and affected by artificially introduced loads of chemical toxicants that also include heavy metals. The Tiljala wetlands of the eastern fringe of Calcutta, West Bengal (India) are a virtual sink for the deposition of urban and industrial wastes that get admixed with the aquatic environment. We have selected Lemna minor (duckweed), as a representative of the biota surviving therein for the present study. Concentrations of lead, cadmium, chromium, zinc, copper and mercury in the fronds of Lemna were measured to peep into the range of input of heavy metals in the duckweed subjects. Natural unexposed population of duckweed from a domestic pond in Batanagar area, 24 Parganas, West Bengal (India) was also found to accumulate similar concentrations of these metals when cultured in artificially contaminated water in the laboratory. The exposed individuals also exhibited polymorphism with respect to the loci of esterase, as compared to an unexposed control plants. Therefore, the present study suggests EST variations of L. minor to be a potential biomarker of heavy metal pollution.     

Reconstruction of radioactive plume characteristics along Chernobyl's Western Trace

Using data obtained from 435 radiation sampling stations in the Red Forest, 1.5 km W if the Chernobyl Nuclear Complex, we reconstructed the deposition pathway of the first plume released by the accident, Chernobyl's Western Trace. The dimensions and deposition rates of the plume remain sharply defined 15 years after the accident. Assuming a uniform particle distribution within the original cloud, we derived estimates of plume dimensions by applying geometric transformations to the coordinates at each sample point. Our derived estimates for the radioactive cloud accounted for 87% of the variation of radioactivity in this region. Results show a highly integrated bell-shaped cross-section of the cloud of radiation, approximately 660 m wide and 290 m high, traveling at a bearing of 264 degrees from reactor IV. Particle sizes within Chernobyl's Western Trace were within the most dangerous range for inhaled aerosols (2-5 microm). Therefore, reconstruction of the dispersion of such particles is critical for understanding the aftermath of nuclear and biological aerosol releases.