Microbial and plant ecology of a long-term TNT-contaminated site

The contamination of the environment with explosive residues presents a serious ecological problem at sites across the world, with the highly toxic compound trinitrotoluene (TNT) the most widespread contaminant. This study examines the soil microbial community composition across a long-term TNT-contaminated site. It also investigates the extent of nitroaromatic contamination and its effect on vegetation. Concentrations of TNT and its metabolites varied across the site and this was observed to dramatically impact on the extent and diversity of the vegetation, with the most heavily contaminated area completely devoid of vegetation. Bryophytes were seen to be particularly sensitive to TNT contamination. The microbial population experienced both a reduction in culturable bacterial numbers and a shift in composition at the high concentrations of TNT. DGGE and community-level physiological profiling (CLPP) revealed a clear change in both the genetic and functional diversity of the soil when soil was contaminated with TNT.     

An investigation into the origins of a series of PM10 anomalies at a remote location in NW England

Throughout 2004, PM(10) concentrations were measured at 10 min intervals at Hazelrigg, a remote location in NW England. The annual mean concentration was 6.1 microg m(-3) and likely origins were determined using directional and particle size characteristics. The fine temporal resolution of the monitoring also allowed several short periods (< 20 h) of persistently high PM(10) concentration to be identified and then 'typed' by event start time, duration, wind direction and particle size characteristics. A series of night time PM(10) anomalies (concentration < 465 microg m(-3)) of no obvious source were identified, and by elimination assumed to have originated from a ground-based fire of particle-rich fodder. A novel methodology combining Stokes' Law with systematic and rigorous modelling of source strength (using ADMS3.2) was developed to locate a possible burn site. The process was limited by the lack of previous modelling studies related to ground-based fires, and also by the capacity of ADMS3.2 to model sub-hourly time-varying emissions and fluctuations in wind speed and direction in the near field. However, modelling did suggest the source was located <400 m SSE of Hazelrigg, and investigation of this area revealed a burn site where tyres and plastic bags were piled nearby. Few studies have combined directional analysis and modelling to locate a source based on sampled data. This innovative methodology could be used by regulatory bodies to investigate the origins of unidentified PM(10) observed within the particle record.     

Combining Environmental Factors and Agriculturalists’ Observations of Environmental Changes in the Traditional Terrace System of the Amalfi Coast (Southern Italy)

Terraces are traditional engineered ecosystems that affect the hydro-geological equilibrium, slope stability, and local communities. The aims of this paper are (i) identifying environmental factors that affect terrace stability in the Amalfi Coast, (ii) defining agriculturalists’ observations on environmental changes within that system and (iii) exploring potentiality of these observations to better define conservation strategies. All available data on physical and ecological factors recognized to affect the terrace system were collected and analyzed. Interviews were conducted with agriculturalists to obtain long-term observations on environmental factors that interact with this system. Landslides are more frequent where rainfall is high and during winter. Fires have an uneven annual distribution, with higher frequency during summers. Agriculturalists detailed complex interactions among environmental factors, economic elements, and terraces. These observations represent a valuable resource for defining causes and effects of abandonment and for better addressing conservation strategies.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0433-3) contains supplementary material, which is available to authorized users.     

From Site Data to Safety Assessment: Analysis of Present and Future Hydrological Conditions at a Coastal Site in Sweden

This paper presents an analysis of present and future hydrological conditions at the Forsmark site in Sweden, which has been proposed as the site for a geological repository for spent nuclear fuel. Forsmark is a coastal site that changes in response to shoreline displacement. In the considered time frame (until year 10 000 ad), the hydrological system will be affected by landscape succession associated with shoreline displacement and changes in vegetation, regolith stratigraphy, and climate. Based on extensive site investigations and modeling of present hydrological conditions, the effects of different processes on future site hydrology are quantified. As expected, shoreline displacement has a strong effect on local hydrology (e.g., groundwater flow) in areas that change from sea to land. The comparison between present and future land areas emphasizes the importance of climate variables relative to other factors for main hydrological features such as water balances.     

Field evaluations of newly available “interference-free” monitors for nitrogen dioxide and ozone at near-road and conventional National Ambient Air Quality Standards compliance sites

Long-standing measurement techniques for determining ground-level ozone (O₃) and nitrogen dioxide (NO₂) are known to be biased by interfering compounds that result in overestimates of high O₃ and NO₂ ambient concentrations under conducive conditions. An increasing near-ground O₃ gradient (NGOG) with increasing height above ground level is also known to exist. Both the interference bias and NGOG were investigated by comparing data from a conventional Federal Equivalent Method (FEM) O₃ photometer and an identical monitor upgraded with an “interference-free” nitric oxide O₃ scrubber that alternatively sampled at 2 m and 6.2 m inlet heights above ground level (AGL). Intercomparison was also made between a conventional nitrogen oxide (NO_x) chemiluminescence Federal Reference Method (FRM) monitor and a new “direct-measure” NO₂ NO_x 405 nm photometer at a near-road air quality measurement site. Results indicate that the O₃ monitor with the upgraded scrubber recorded lower regulatory-oriented concentrations than the deployed conventional metal oxide–scrubbed monitor and that O₃ concentrations 6.2 m AGL were higher than concentrations 2.0 m AGL, the nominal nose height of outdoor populations. Also, a new direct-measure NO₂ photometer recorded generally lower NO₂ regulatory-oriented concentrations than the conventional FRM chemiluminescence monitor, reporting lower daily maximum hourly average concentrations than the conventional monitor about 3 of every 5 days.

Implications: Employing bias-prone instruments for measurement of ambient ozone or nitrogen dioxide from inlets at inappropriate heights above ground level may result in collection of positively biased data. This paper discusses tests of new regulatory instruments, recent developments in bias-free ozone and nitrogen dioxide measurement technology, and the presence/extent of a near-ground O₃ gradient (NGOG). Collection of unbiased monitor inlet height–appropriate data is crucial for determining accurate design values and meeting National Ambient Air Quality Standards.     

Identification of a phytotoxic photo-transformation product of diclofenac using effect-directed analysis

The pharmaceutical diclofenac (DCF) is released in considerably high amounts to the aquatic environment. Photo-transformation of DCF was reported as the main degradation pathway in surface waters and was found to produce metabolites with enhanced toxicity to the green algae Scenedesmus vacuolatus. We identified and subsequently confirmed 2-[2-(chlorophenyl)amino]benzaldehyde (CPAB) as a transformation product with enhanced toxicity using effect-directed analysis. The EC₅₀ of CPAB (4.8 mg/L) was a factor of 10 lower than that for DCF (48.1 mg/L), due to the higher hydrophobicity of CPAB (log K_ow = 3.62) compared with DCF (log D_ow = 2.04) at pH 7.0.     

Putting vulnerability to climate change on the map: a review of approaches, benefits, and risks

There is growing demand among stakeholders across public and private institutions for spatially-explicit information regarding vulnerability to climate change at the local scale. However, the challenges associated with mapping the geography of climate change vulnerability are non-trivial, both conceptually and technically, suggesting the need for more critical evaluation of this practice. Here, we review climate change vulnerability mapping in the context of four key questions that are fundamental to assessment design. First, what are the goals of the assessment? A review of published assessments yields a range of objective statements that emphasize problem orientation or decision-making about adaptation actions. Second, how is the assessment of vulnerability framed? Assessments vary with respect to what values are assessed (vulnerability of what) and the underlying determinants of vulnerability that are considered (vulnerability to what). The selected frame ultimately influences perceptions of the primary driving forces of vulnerability as well as preferences regarding management alternatives. Third, what are the technical methods by which an assessment is conducted? The integration of vulnerability determinants into a common map remains an emergent and subjective practice associated with a number of methodological challenges. Fourth, who participates in the assessment and how will it be used to facilitate change? Assessments are often conducted under the auspices of benefiting stakeholders, yet many lack direct engagement with stakeholders. Each of these questions is reviewed in turn by drawing on an illustrative set of 45 vulnerability mapping studies appearing in the literature. A number of pathways for placing vulnerability mapping on a more robust footing are also identified.     

PCDD/F, PCB, PBDE, HBCD and chlorinated pesticides in a Swedish market basket from 2005--levels and dietary intake estimations

Based on consumption data statistics, food items from four regions in Sweden were sampled in a so-called market basket study. Food items from five food groups, i.e. fish, meat, dairy products, eggs and fat/oils, were analyzed for persistent organic pollutants (POPs) followed by per capita intake calculations. The highest levels of PCDD/F, PCB, PBDE, HBCD and chlorinated pesticides were found in the fish/fish products. The estimated market basket per capita intake of PCDD/F and dl-PCB was 0.7 pg WHO-TEQ kg bw⁻¹ d⁻¹ (TEFs from 1998). The intake of ∑PCB was estimated to 4.9 ng kg bw⁻¹ d⁻¹ and fish was found to be the major contributor with 64%. The intake of ∑PBDE was found to be 0.7 ng kg bw⁻¹ d⁻¹. Fish (38%) and dairy products (31%) were the largest contributors to the total PBDE intake. The intake of HBCD was estimated to 0.14 ng kg bw⁻¹ d⁻¹. HBCD mainly came from fish (65%), but also dairy products (24%) and meat (10%) contributed. Also regarding the chlorinated pesticides, fish was found to be the major contributor, with 51% of the ∑DDT coming from fish. The intake of ∑DDT, ∑HCH and HCB was 4.0, 1.0 and 1.1 ng kg bw⁻¹ d⁻¹, respectively. Most of the ∑HCH and HCB originate from dairy products (43% and 55%, respectively). This study shows that the levels, and intake, of different POPs from food of animal origin in the market basket of 2005 seem to have decreased since the market basket study in 1999.     

The impact of EDTA on the rate of accumulation and root/shoot partitioning of cadmium in mature dwarf sunflowers

In addition to increasing the mobility of metal ions in the soil solution, chelating agents such as EDTA have been reported to alter both the total metal accumulated by plants and its distribution within the plant structures. Here, mature Mini-Sun Hybrid dwarf sunflowers exposed to 300 μM Cd²⁺ in hydroponic solution had initial translocation rates of at least 0.12 mmol kg⁻¹ h⁻¹ and reached leaf saturation levels within a day when a 3-fold molar excess of EDTA was used. EDTA also promoted cadmium transfer from roots to the shoots. A threefold excess of EDTA increased the translocation factor (TF) 100-fold, resulting in cadmium levels in the leaves of 580 μg g⁻¹ and extracting 1400 μg plant⁻¹. When plants were exposed to dissolved cadmium without EDTA, the vast majority of the metal remained bound to the exterior of the root. The initial accumulation could be successfully modeled with a standard biosorption pseudo second-order kinetic equation. Initial accumulation rates ranged from 0.0359 to 0.262 mg g⁻¹ min⁻¹. The cadmium binding could be cycled, and did not show evidence of saturation under the experimental conditions employed, suggesting it might be a viable biosorbant for aqueous cadmium.     

Halogenated organic compounds in archived whale oil: a pre-industrial record

To provide additional evidence that several halogenated organic compounds (HOCs) found in environmental samples are natural and not industrially produced, we analyzed an archived whale oil sample collected in 1921 from the last voyage of the whaling ship Charles W. Morgan. This sample, which pre-dates large-scale industrial manufacture of HOCs, contained two methoxylated polybrominated diphenyl ethers (MeO-PBDEs), five halogenated methyl bipyrroles (MBPs), one halogenated dimethyl bipyrrole (DMBP), and tentatively one dimethoxylated polybrominated biphenyl (diMeO-PBB). This result indicates, at least in part, a natural source of the latter compounds.