Severity models of cross-median and rollover crashes on rural divided highways in Pennsylvania

Introduction

Crossover and rollover crashes in earth-divided, traversable medians on rural divided highways can lead to severe injury outcomes. This study estimated severity models of these two crash types. Vehicle, driver, roadway, and median cross-section design data were factors considered in the models. A unique aspect of the data used to estimate the models were the availability of median cross-slope data, which are not commonly included in roadway inventory data files.

Methods

A binary logit model of cross-median crash severity and a multinomial logit model of rollover crash severity were estimated using five years of data from rural divided highways in Pennsylvania.

Results

The highest probability of a fatal or major injury in cross-median and rollover crashes was found to occur in cases when a driver was not wearing a seatbelt. While flatter cross-slopes and narrower medians were associated with more severe cross-median crash outcomes, steeper cross-slopes and narrower medians significantly increased rollover crash severity outcomes. The presence of horizontal curves was associated with increased probabilities of high-severity outcomes in a median rollover crash.

Impact on Industry

Modeling results in this study confirmed that cross-median and median rollover crash severity outcomes are associated with median cross-section design characteristics. Based on the estimated models, it appears that flatter and narrower medians lead to more severe injury outcomes in cross-median crashes. Steeper median cross-slopes and narrower medians were associated with higher probabilities of more severe outcomes in median rollover crashes. The results presented in this study suggest that there is a trade-off between median cross-section design and cross-median and rollover crashes in earth-divided, traversable medians on rural divided highways. While the severity models can be included in a framework to develop design guidance in relation to this trade-off, models of crash frequency should also be considered.     

Using consequence analysis on some chlorine operation hazards and their possible effects on neighborhoods in central Taiwan

The applications of chlorine have been broadly used in many industrial products, such as bleaching agents, synthetic rubbers, plastics, disinfectants, iron chlorides, fire refractory materials, insecticides, and anti-freezers, etc. According to the Taiwan Environmental Protection Administration (TEPA), more than 30 thousand tons were used in the year 2000. In addition, there were more than 12 reported incidents from 2000 to 2003—mostly on using chlorine as disinfectants (five) and as process agents (four).

This study investigated 15 chlorine operation plants in central Taiwan. These chlorine usages included bleaching agents, disinfectants, iron chloride, synthesizing rubber plastics, and others. Thirteen plants were located in the industrial parks and two were in or near residential zones. The consequence analysis were used three different methods to analyze the worst-case scenarios (WCSs) and alternative release case scenarios (ACSs) in order to compare impact zones for applying various active and passive mitigation systems, such as confined space, scrubber, water-spray, and so no. For two plants in or near residential zones, multi-layers mitigation systems and operation limits should be implemented in order to enforce more stringent protection measures. However, there was no specific regulation for chlorine plants operated at different locations, such as industrial parks or residential zones. In order to reduce chemical accidents and their impacts on public safety, our results suggest that source mitigation/management and warning systems should be adopted simultaneously.     

Low-temperature oxidation of coal at elevated pressures

A mathematical model is presented to describe steady-state mass transfer and oxidation processes in coal at low temperatures in a fixed-bed flow reactor. The model incorporates the effects of partial pressure of oxygen, temperature and coal particle size, and accounts for the rate of coal oxidation and the composition of oxygenated products at high pressures. This is an important development since previous models did not include the effect of pressure in their formulation. It is found that, when the partial pressure of oxygen increases the rate of oxygen consumption increases accordingly. However, the influence of partial pressure of oxygen on the rate of oxidation is less pronounced when the pressure surpasses 1 MPa. In addition the model predicts that, for a constant partial pressure of oxygen, higher rates of oxygen consumption occur at lower total pressures. The same trends are also found for the concentration of oxygenated products at the reactor outlet. It is suggested that, the variation of partial pressure of oxygen leads to different concentration levels of oxygen at the surface and within the pores of coal particles, substantially affecting the rate of oxidation.     

Phytopumping for hydraulic control of an arsenic plume

Phytoremediation, the use of plants for in situ contaminant cleanup, is gaining new appreciation as an aesthetically pleasing, sustainable method that naturally makes use of solar power. Hybrid poplars are widely used because they grow rapidly and have high transpiration rates, making them advantageous for hydraulic control of groundwater. However, the tendency for trees and other vegetation to uptake metals may be a disadvantage in some settings due to potential redistribution of metals from groundwater to the ground surface. Therefore, a pilot test in the upper midwestern United States was implemented to evaluate the applicability of poplars to groundwater withdrawal and metals transport. © 2009 Wiley Periodicals, Inc.     

Identification of Odor Causing Compounds in a Commercial Dairy Farm

The odorous air emissions from confined animal feeding operations (CAFOs), such as swine, poultry and dairy farms, are increasingly raising community complaints. Odorous emissions can result in health damages, psychological discomforts and adverse aesthetic effects in the community. However, these emissions are not well characterized up to now due to the lack of legislation, the limitations in sampling and instrumentation techniques, and the complexity of the emissions themselves. This study is aimed at the development of a high volume sampler and sorbent assembly to identify the odor causing compounds from a diary CAFO. The sorbent was custom designed to target the potential compounds that may exist in a dairy farm and was validated in laboratory with a synthetic odor from the swine manure. The actual samples at the diary farm were collected in spring and summer of 2005. The sorbents were solvent extracted and individual odor compounds were identified using GC–MS (gas chromatography–mass spectroscopy). The data obtained indicated that high volume sampling can shorten the sampling time from days to within 4 h. Both volatile organic compounds (VOCs) and volatile fatty acids (VFAs) have been identified from the dairy farm, such as phenol, methylphenol, 4-ethyl phenol, indole, methyl indole, benzyl alcohol, hexanoic acid, valeric acid and iso-valeric acid, together with some nitrogen containing compounds that have not been reported before.     

Methods for evaluating investment strategies for environmental technologies

Environmental technology development, like other ventures, requires decisions regarding where to invest scarce capital. The investment option that offers the greatest benefit relative to the cost should be chosen. The problem is to determine a way to analyze the project and apply a useful measure for comparison to other investment opportunities. In this article, three methods of analysis are presented: return on investment, benefit-to-cost ratio, and payback period. Formulas are developed for each of the methods, and a case study illustrates their application.     

Current status and research on E-waste issues in Asia

Rapid economic growth in Asia and the increasing transboundary movement of secondary resources will increasingly require both 3R endeavors (reduce, reuse, recycle) in each country and appropriate control of international material cycles. Recently, managing electrical and electronic waste (E-waste) has become an important target for domestic and international material cycles from the viewpoints of environmental preservation and resource utilization efficiency. To understand the current status of E-waste issues in the context of international material cycles and to discuss the future tasks related to achieving 3R in the region, we organized the National Institute for Environmental Studies (NIES) E-waste Workshop in December 2004. This article reviews past studies on E-waste and briefly describes the topics presented and discussions held at the workshop. The topics at the workshop included E-waste generation, recycling systems, international trade, and environmental impacts. In addition, we discussed various issues such as terminology, current environmental concerns, and possible solutions. Transboundary shipments of E-waste should be conducted taking into consideration the concept of sustainable development. The direction of future research and possible collaborations are also discussed.