Factors influencing PM10 emissions from road pavement wear

Accelerated pavement wear is one of the major environmental disadvantages of studded tyres in northern regions and results in increased levels of PM₁₀. Measurements of PM₁₀ in a road simulator hall have been used to study the influence of pavement properties, tyre type and vehicle speed on pavement wear. The test set-up included three different pavements (one granite and two quartzite with different aggregate sizes), three different tyre types (studded, non-studded, and summer tyres) and different speeds (30–70 km h^?1). The results show that the granite pavement was more prone to PM₁₀ production compared to the quartzite pavements. Studded winter tyres yield tens of times higher PM₁₀ concentrations compared to non-studded winter tyres. Wear from summer tyres was negligible in comparison. It was also shown that wear is strongly dependent on speed; every 10 km h^?1 increase yielded an increase of the PM₁₀ concentration of 680 μg m^?3 in one of the simulator experiments.     

Characterisation of particulate matter and gaseous emissions from a large ship diesel engine

Composition of exhaust from a ship diesel engine using heavy fuel oil (HFO) was investigated onboard a large cargo vessel. The emitted particulate matter (PM) properties related to environmental and health impacts were investigated along with composition of the gas-phase emissions. Mass, size distribution, chemical composition and microphysical structure of the PM were investigated. The emission factor for PM was 5.3 g (kg fuel)^?1. The mass size distribution showed a bimodal shape with two maxima: one in the accumulation mode with mean particle diameter D_P around 0.5 μm and one in the coarse mode at D_P around 7 μm. The PM composition was dominated by organic carbon (OC), ash and sulphate while the elemental carbon (EC) composed only a few percent of the total PM. Increase of the PM in exhaust upon cooling was associated with increase of OC and sulphate. Laser analysis of the adsorbed phase in the cooled exhaust showed presence of a rich mixture of polycyclic aromatic hydrocarbon (PAH) species with molecular mass 178–300 amu while PM collected in the hot exhaust showed only four PAH masses.Microstructure and elemental analysis of ship combustion residuals indicate three distinct morphological structures with different chemical composition: soot aggregates, significantly metal polluted; char particles, clean or containing minerals; mineral and/or ash particles. Additionally, organic carbon particles of unburned fuel or/and lubricating oil origin were observed. Hazardous constituents from the combustion of heavy fuel oil such as transitional and alkali earth metals (V, Ni, Ca, Fe) were observed in the PM samples.Measurements of gaseous composition in the exhaust of this particular ship showed emission factors that are on the low side of the interval of global emission factors published in literature for NO_x, hydrocarbons (HC) and CO.     

Maternal transfer of organochlorines and brominated flame retardants in blue tits (Cyanistes caeruleus)

Although eggs have frequently been used as a biomonitoring tool for contamination with organohalogenated pollutants (OHPs), few studies have investigated the processes of maternal transfer in birds. Here, maternal transfer of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) was investigated through comparison of the concentrations and profiles between whole homogenised female blue tits (Cyanistes caeruleus) and their eggs. In addition, we examined if there was an effect of laying order on the concentrations of PCBs, OCPs and PBDEs. PCBs were the most abundant contaminants in female blue tits and their eggs, followed by OCPs and PBDEs. Among the OCPs, p,p'-DDE was the most dominant compound and accounted for more than 80% of the sum OCPs. Egg concentrations decreased significantly in relation to the laying order from 1623+/-148 ng/g lipid weight (lw) to 1040+/-47 ng/g lw for the sum PCBs, from 342+/-24 ng/g lw to 235+/-17 ng/g lw for the sum OCPs and from 49+/-5 ng/g lw to 27+/-5 ng/g lw for the sum PBDEs. When reviewing all studies investigating laying order effects of OHPs in birds, no clear patterns emerged, which may be due to differences in study species and methodology among studies. Despite the fact that there were laying order effects in blue tit clutches, the variance in concentrations of PCBs and PBDEs was larger among clutches than within clutches. Variance in OCP concentrations among clutches was similar to the variance within clutches. These results suggest that one randomly collected blue tit egg from a clutch is useful as biomonitoring tool for PCBs and PBDEs, while for OCPs it is recommended to consistently use the same egg from the laying sequence as a biomonitoring tool. Lipid-normalized concentrations of sum PCBs, sum OCPs and sum PBDEs in female blue tits after clutch completion were comparable to the concentrations in the first-laid eggs. The egg/female lipid concentration ratios for sum PCBs, sum OCPs and sum PBDEs decreased significantly from 1.0+/-0.09 to 0.7+/-0.003, 1.1+/-0.1 to 0.7+/-0.02 and 1.2+/-0.14 to 0.8+/-0.05, respectively, during the course of egg laying. The profiles of the females and eggs differed significantly for the PCBs, OCPs and PBDEs. There was a higher contribution of lower chlorinated PCB congeners (CB 28, CB 52, CB 95, CB 101 and CB 110), BDE 183, p,p'-DDT and other less persistent OCPs in the females compared to their eggs. Maternal transfer in blue tits seemed to be selective for the more bioaccumulative and persistent congeners/compounds.     

An exposure study with polybrominated diphenyl ethers (PBDEs) in female European starlings (Sturnus vulgaris): toxicokinetics and reproductive effects

We exposed female European starlings to a pentabromodiphenyl ether (Penta-BDE) mixture through subcutaneous implants, and examined levels and profiles of polybrominated diphenyl ethers (PBDEs) together with reproductive effects. Sum PBDE levels increased significantly in the serum of the exposed females from 218 ± 43 to 23,400 ± 2035 pg/ml. Sum PBDE concentrations in the eggs of the exposed group ranged from 130 ± 12 to 220 ± 37 ng/g wet weight (ww). The profile in serum after egg laying was very similar to that in eggs. There were no detectable levels of HO-PBDEs in both serum and eggs. Fewer females of the exposed group initiated egg laying compared to the control group, although the difference was not significant. In addition, egg weight and volume were significantly higher in the exposed group. These results suggest that, at the investigated exposure levels (150 μg sum PBDEs/bird), PBDEs may have a negative effect on reproductive performance.     

The variability of processes involved in transgene dispersal—case studies from Brassica and related genera

Background, aim, and scope

We strive to predict consequences of genetically modified plants (GMPs) being cultivated openly in the environment, as human and animal health, biodiversity, agricultural practise and farmers’ economy could be affected. Therefore, it is unfortunate that the risk assessment of GMPs is burdened by uncertainty. One of the reasons for the uncertainty is that the GMPs are interacting with the ecosystems at the release site thereby creating variability. This variability, e.g. in gene flow, makes consequence analysis difficult. The review illustrates the great uncertainty of results from gene-flow analysis.

Main features

Many independent experiments were performed on the individual processes in gene flow. The results comprise information both from laboratory, growth chambers and field trials, and they were generated using molecular or phenotypic markers and analysis of fitness parameters. Monitoring of the extent of spontaneous introgression in natural populations was also performed. Modelling was used as an additional tool to identify key parameters in gene flow.

Results

The GM plant may affect the environment directly or indirectly by dispersal of the transgene. Magnitude of the transgene dispersal will depend on the GM crop, the agricultural practise and the environment of the release site. From case-to-case these three factors provide a variability that is reflected in widely different likelihoods of transgene dispersal and fitness of introgressed plants. In the present review, this is illustrated through a bunch of examples mostly from our own research on oilseed rape, Brassica napus. In the Brassica cases, the variability affected all five main steps in the process of gene dispersal. The modelling performed suggests that in Brassica, differences in fitness among plant genome classes could be a dominant factor in the establishment and survival of introgressed populations.

Discussion

Up to now, experimental analyses have mainly focused on studying the many individual processes of gene flow. This can be criticised, as these experiments are normally carried out in widely different environments and with different genotypes, and thus providing bits and pieces difficult to assemble. Only few gene-flow studies have been performed in natural populations and over several plant generations, though this could give a more coherent and holistic view.

Conclusion

The variability inherent in the processes of gene flow in Brassica is apparent and remedies are wished for. One possibility is to expose the study species to additional experiments and monitoring, but this is costly and will likely not cover all possible scenarios. Another remedy is modelling gene flow. Modelling is a valuable tool in identifying key factors in the gene-flow process for which more knowledge is needed, and identifying parameters and processes which are relatively insensitive to change and therefore require less attention in future collections of data. But the interdependence between models and experimental data is extensive, as models depend on experimental data for their development or testing.

Recommendations

More and more transgenic varieties are being grown worldwide harbouring genes that might potentially affect the environment (e.g. drought tolerance, salt tolerance, disease tolerance, pharmaceutical genes). This calls for a thorough risk assessment. However, in Brassica, the limited and uncertain knowledge on gene flow is an obstacle to this. Modelling of gene flow should be optimised, and modelling outputs verified in targeted field studies and at the landscape level. Last but not least, it is important to remember that transgene flow in itself is not necessarily a thread, but it is the consequences of gene flow that may jeopardise the ecosystems and the agricultural production. This emphasises the importance of consequence analysis of genetically modified plants.     

Ecotoxicological effects of an aged TiO2 nanocomposite measured as apoptosis in the anecic earthworm Lumbricus terrestris after exposure through water, food and soil

Titanium dioxide nanoparticles seem to have a low toxicity to terrestrial organisms, though few studies are published in this area. TiO(2) used in sunscreens are nanocomposites where TiO(2) has been coated with magnesium, silica or alumina, as well as amphiphilic organics like polydimethyl siloxane (PDMS), and these coatings are modified by ageing. We assessed the ecotoxicity and propensity for bioaccumulation of an aged TiO(2) nanocomposite used in sunscreen cosmetics, and its potential effect on the frequency of apoptosis in different earthworm tissues. The earthworm Lumbricus terrestris was exposed to the TiO(2) nanocomposite for 7 days in water or 2-8 weeks in soil with the nanocomposite mixed either into food or soil at concentrations ranging from 0 to 100 mg kg(-1). Apoptosis was then measured by immunohistochemistry and Ti localized by XRF microscopy. Results showed no mortality, but an enhanced apoptotic frequency which was higher in the cuticule, intestinal epithelium and chloragogenous tissue than in the longitudinal and circular musculature. TiO(2) nanoparticles did not seem to cross the intestinal epithelium/chloragogenous matrix barrier to enter the coelomic liquid, or the cuticule barrier to reach the muscular layers. No bioaccumulation of TiO(2) nanocomposites could thus be observed.     

A Native Species with Invasive Behaviour in Coastal Dunes: Evidence for Progressing Decay and Homogenization of Habitat Types

A new species has recently invaded coastal dune ecosystems in North West Europe. The native and expansive inland grass, Deschampsia flexuosa, progressively dominating inland heaths, has recently invaded coastal dunes in Denmark, occasionally even as a dominant species. A total of 222 coastal locations with 5,000 random sample plots have been investigated. These findings are in contrast to historical records, and D. flexuosa has never been considered belonging to coastal dune ecosystems. The occurrence of the typical inland grass in the coastal dunes is a strong indication of increase in nutrient level and that human influences may cause a native species to be invasive in new ecosystems. This could be a radical example of change in species composition due to a long lasting exceedance of critical load of nitrogen. The investigation also showed a general increase in cover of the most dominant species.     

Geoelectrical methods for monitoring geological CO2 storage: First results from cross-hole and surface–downhole measurements from the CO2SINK test site at Ketzin (Germany)

The feasibility of monitoring CO₂ migration in a saline aquifer at a depth of about 650 m with cross-hole and surface–downhole electrical resistivity tomography (ERT) is investigated at the CO₂SINK test site close to Ketzin (Germany). The permanent vertical electrical resistivity array (VERA) consists of 45 electrodes (15 in the injection well Ktzi201 and 15 in each of the two observation wells Ktzi200 and Ktzi202), successfully placed on the electrically insulated casings, in the depth range of about 590–740 m with a spacing of about 10 m. The three Ketzin wells are arranged as perpendicular triangle with distances of 50 and 100 m.First synthetic modelling studies indicate an increase of the electrical resistivity of about 200% caused by CO₂ injection, corresponding to a bulk CO₂ saturation of 50%, which is in good agreement with laboratory studies. Finite difference inversion of field data delivers three-dimensional resistivity distributions between the wells which are consistent with the reservoir modelling studies.To increase the limited observation area provided by the cross-hole measurements, additional surface–downhole measurements were deployed. A main CO₂ migration in SE–NW direction is deduced from surface to downhole resistivity experiments.The first cross-hole time-lapse results show that the resolution and the coverage of the electrode array in the Ketzin setting are sufficient to resolve the expected resistivity changes on the characteristic length scale of the electrode array. Significant resistivity changes could be measured, however, detailed information on the CO₂ plume could not be resolved yet by VERA under the existing geological circumstances.     

Assessment of Blue Mussel <Emphasis Type="Italic">Mytilus edulis</Emphasis> Fisheries and Waterbird Shellfish-predator Management in the Danish Wadden Sea

We assessed the blue mussel Mytilus edulis fishery management scheme introduced in 1994 in the Danish Wadden Sea that regulate fishing vessels, fishery quota, set-aside for mussel-eating birds and established zones closed to mussel fishery. The results showed (i) a reduction in the blue mussel biomass and mussel bed areas in zones closed to fishery, (ii) decrease in eiders Somateria mollissima numbers and increase or stable numbers for oystercatcher Haematopus ostralegus and herring gull Larus argentatus and (iii) that energy estimations based on ecological food requirements for the mussel-eating birds should be at least three times larger, than the amount set-aside in the mussel management scheme. It is concluded that the mussel management scheme had been unable to stabilize or increase the blue mussel stocks and to secure stable or increasing numbers for all target bird species. Thus, it is recommended to revise the present blue mussel management scheme in the Danish Wadden Sea, to continue and improve mussel stock and bird surveys, and to consider novel studies of the mussel-eating birds’ energetics for improved set-aside estimates and future assessments.     

Stormwater Runoff Quality and Quantity From Traditional and Low Impact Development Watersheds1

Abstract: The quality and quantity of residential stormwater runoff from a control, traditional, and low impact development (LID) watershed were compared in a paired watershed study. A traditional neighborhood was built using typical subdivision standards while a LID design was constructed with best management practices including grass swales, cluster housing, shared driveways, rain gardens, and a narrower pervious concrete‐paver road. Weekly, flow‐weighted, composite samples of stormwater were analyzed for nitrate + nitrite‐nitrogen (NO₃ + NO₂‐N), ammonia‐nitrogen (NH₃‐N), total Kjeldahl nitrogen (TKN), total phosphorus (TP), and total suspended solids (TSS). Monthly composite samples were analyzed for total copper (Cu), lead (Pb), and zinc (Zn). Mean weekly storm flow increased (600x) from the traditional watershed in the postconstruction period. Increased exports of TKN, NO₃ + NO₂‐N, NH₃‐N, TP, Cu, Zn, and TSS in runoff were associated with the increased storm flow. Postconstruction storm flow in the LID watershed was reduced by 42% while peak discharge did not change from preconstruction conditions. Exports were reduced from the LID watershed for NH₃‐N, TKN, Pb, and Zn, while TSS and TP exports increased.