Responses of Gammarus pulex (Amphipoda, Crustacea) to metalliferous effluents: identification of toxic components and the importance of interpopulation variation

This study was designed to evaluate the ability of an in-situ bioassay to assess the impact of complex effluents on freshwaters and to identify toxic components. Reductions in the feeding rate of Gammarus pulex proved to be a sensitive indicator of the impact of metalliferous effluents on receiving water quality. The effluents contained a mixture of five potentially toxic metals. By combining information on feeding rates with bioaccumulation data, two metals, iron and manganese, were identified as the probable toxic agents. Laboratory experiments validated the conclusions reached from the field study and confirmed that iron was a major toxicant. The sensitivities of Gammarus pulex from a metal-contaminated site and a clean site were compared during both the field and laboratory studies. Interpopulation differences in the response of G. pulex to toxicants were detected in the field study but not in the laboratory experiments. Possible reasons for this are discussed.     

Comparison of calculated and measured foliar O3 flux in crop and forest species

We designed a new gas exchange system that concurrently measures foliar H2O, O3, and CO2 flux (HOC flux system) while delivering known O3 concentrations. Stomatal responses of three species were tested: snapbean, and seedlings of California black oak (deciduous broadleaf) and blue oak (evergreen broadleaf). Acute O3 exposure (120-250 ppb over an hour) was applied under moderate light and low vapor pressure deficits during near steady state conditions. The rate of stomatal closure was measured when the whole plant was placed in the dark. An adjacent leaf on each plant was also concurrently measured in an O3-free cuvette. Under some conditions, direct measurements and calculated foliar O3 flux were within the same order of magnitude; however, endogenously low gs or O3 exposure-induced depression of gs resulted in an overestimation of calculated O3 fluxes compared with measured O3 fluxes. Sluggish stomata in response to light extinction with concurrent O3 exposure, and incomplete stomatal closure likewise underestimated measured O3 flux.     

Characterisation of esterases as potential biomarkers of pesticide exposure in the lugworm Arenicola marina (Annelida: Polychaeta)

Here, we identify and characterise cholinesterase (ChE) and carboxylesterase (CbE) activities in the body tissues of the sediment dwelling worm Arenicola marina. Exposure to the organophosphorus pesticide azamethiphos yielded an in vitro IC50 of 5 microg l(-1) for propionylcholinesterase (PChE). PChE was significantly inhibited in vivo after a 10 day exposure to 100 microg l(-1) azamethiphos, equivalent to the recommended aquatic application rate (ANOVA; F=2.75, P=0.033). To determine sensitivity to environmental conditions, A. marina were exposed for 10 days to field collected sediments. PChE activity was significantly lower in worms exposed to sediments from an estuary classified to be at high risk from point source pollution by the UK Environment Agency (ANOVA; F=15.33, P<0.001). Whilst causality cannot be directly attributed from these latter exposures, they provide an important illustration of the potential utility of esterase activity as a biomarker of environmental quality in this ecologically relevant sentinel species.     

The effect of environmental and design parameters on subjective road safety — a case study in Poland

In order to get a better insight into the safety effects of alternative road designs, the subjective safety experiment has been conducted. The experiment has been designed to test the effect of geometric design characteristics and road environment on the subjective safety of rural road curves. The method used here allows to investigate the effect of a real driving environment on safety in a complex way. The results have shown the importance of the composed effect of curve geometry and curve environment on the subjective safety of rural curves.     

Work–family conflicts of women in the Air Force: their influence on mental health and functioning

This paper examined the effects of work and family stressors and conflicts on Air Force women's mental health and functioning. We analyzed data from a 1993 survey of representative stratified samples of 525 Air Force women from the active duty reserve and guard forces. The analyses of the data are guided by the comprehensive model of work–family conflict that has been tested by Frone, Russell, and Cooper (1992) using a large representative community sample. Structural equation modeling analyses provided support for the work–family conflict model. The analyses also provided support for an extension of the model, which included the separate effects of marital and parental roles on mental health. The extended model demonstrated that job and parental stresses had direct effects on work–family conflicts and that job and marital distress and family–work conflict had an independent adverse effect on mental health. Whereas job and parental involvement had a beneficial effect on distress, they had an adverse effect on work–family conflicts. Copyright © 1999 John Wiley & Sons, Ltd.     

Single-laboratory evaluation and modification of U.S. EPA methods 7470 and 7471 for the determination of mercury in aqueous and solid hazardous wastes

The current U.S. Environmental Protection Agency (U.S. EPA) protocols for mercury determinations in aqueous and solid waste samples (SW-846 Methods 7470 and 7471) using recirculating cold-vapor atomic absorption spectrometry (CV-AAS) have been evaluated. The U.S. EPA methods are not sufficiently flexible to permit special quality control (QC) measures, have limited detectability for low-level mercury concentrations, and are plagued by spectral interferences caused by the nonspecific absorption of primary mercury radiation by volatile organic vapors. The U.S. EPA protocols have been modified in a single-laboratory study to facilitate additional QC measures, to enhance detectability for low-level mercury concentrations, and to eliminate nonspecific vapor absorption interferences. Volumetric manipulations for additional QC measures, if required, are facilitated by performing the sample digestions in Erlenmeyer flasks rather than in the current Biochemical Oxygen Demand (BOD) reduction-aeration bottles. Typical manipulations for additional QC measures that are now feasible include dilution of concentrated samples and multiple aliquot sampling for post-digestion spike and replicate analyses. Instrument detectability is improved 10-fold by using a gas sparging bottle as a dedicated reduction-aeration vessel and a silver wool-amalgamation CV-AAS system operated in an open configuration. The on-line amalgamation/thermal desorption process of the modified CV-AAS system eliminates interfering water and organic matrix vapors prior to the mercury absorption measurement. Good accuracy and precision have been obtained with the amalgamation CV-AAS system for the analyses of four reference sediment materials. The amalgamation CV-AAS measurements on the reference sediment digests have been successfully performed at absolute mercury concentration levels that are only 1 to 4 times above the instrumental detection limit of the U.S. EPA recirculating CV-AAS method.     

Economic viability and optimization of solar microgrids with hybrid storage in a non-interconnected zone in Colombia

Environment, Development and Sustainability - A developing country that does not have adequate energy solutions in non-interconnected zones (ZNIs) undoubtedly experiences adverse effects in terms...     

Changes in the Distribution of Broadleaf Tree Species in the Central Part of the Southern Urals since the 1970s

Russian Journal of Ecology - Changes in the distribution of broadleaf tree species—Tilia cordata Mill., Quercus robur L., Acer platanoides L., and Ulmus glabra Huds.—in the central part...     

Demonstration of a high field electrostatically enhanced venturi scrubber on a magnesium furnace fume emission

A 566 m³/m (20,000 acfm) permanent installation demonstration system, consisting of the Air Pollution Systems' High Intensity Ionizer and a variable throat venturi scrubber (called the Scrub-E) has been installed on a magnesium recovery furnace. The furnace produces submicron fume particles of MgO, MgCl₂, and ZrCl₄. The system is designed to demonstrate the effectiveness of the High Intensity Ionizer versus high venturi pressure drop on the furnace emissions. The High Intensity Ionizer array operates stably at field strengths of 10–15 kV/cm and at velocities in excess of 18 m/sec (60 fps) while maintaining high charging efficiencies. The report covers the system design, technology, applications, and project developments. An Environmental Protection Agency proposed charged droplet Scrub-E is also discussed covering the design, technology, and proposed demonstration program.