Assessment of five bioaccessibility assays for predicting the efficacy of petroleum hydrocarbon biodegradation in aged contaminated soils

In this study, the bioaccessibility of petroleum hydrocarbons in aged contaminated soils (1.6-67gkg(-1)) was assessed using four non-exhaustive extraction techniques (100% 1-butanol, 100% 1-propanol, 50% 1-propanol in water and hydroxypropyl-β-cyclodextrin) and the persulfate oxidation method. Using linear regression analysis, residual hydrocarbon concentrations following bioaccessibility assessment were compared to residual hydrocarbon concentrations following biodegradation in laboratory-scale microcosms in order to determine whether bioaccessibility assays can predict the endpoint of hydrocarbon biodegradation. The relationship between residual hydrocarbon concentrations following microcosm biodegradation and bioaccessibility assessment was linear (r(2)=0.71-0.97) indicating that bioaccessibility assays have the potential to predict the extent of hydrocarbon biodegradation. However, the slope of best fit varied depending on the hydrocarbon fractional range assessed. For the C(10)-C(14) hydrocarbon fraction, the slope of best fit ranged from 0.12 to 0.27 indicating that the non-exhaustive or persulfate oxidation methods removed 3.5-8 times more hydrocarbons than biodegradation. Conversely, for the higher molecular weight hydrocarbon fractions (C(29)-C(36) and C(37)-C(40)), biodegradation removed up to 3.3 times more hydrocarbons compared to bioaccessibility assays with the resulting slope of best fit ranging from 1.0-1.9 to 2.0-3.3 respectively. For mid-range hydrocarbons (C(15)-C(28)), a slope of approximately one was obtained indicating that C(15)-C(28) hydrocarbon removal by these bioaccessibility assays may approximate the extent of biodegradation. While this study demonstrates the potential of predicting biodegradation endpoints using bioaccessibility assays, limitations of the study include a small data set and that all soils were collected from a single site, presumably resulting from a single contamination source. Further evaluation and validation is required using soils from a range of hydrocarbon contamination sources in order to develop robust assays for predicting bioremediation endpoints in the field.     

Spatio-temporal covariation of urban particle number concentration and ambient noise

Mobile measurements of ambient noise and particle number concentrations were carried out within an urban residential area in Essen, Germany, during summer 2008. A busy major road with a traffic intensity of about 44,000 vehicles per day was situated within the study area. The spatio-temporal distribution of noise and particles was closely coupled to road traffic on the major road. Total particle number concentrations in proximity to the main road were on average between 25,000 cm^?3 and 35,000 cm^?3 while sound levels reached 70–78 dB(A). These estimates were more than double-fold (factor 2.4) in comparison to the urban residential background. At a 50 m distance off the road particle number concentrations were decaying to about 50% of the initial value. The measurements were characterised by close spatial correlation between total particle number concentration and ambient noise with correlation coefficients of up to r = 0.74. However, during one measurement day coupling between both quantities was weak due to higher turbulent mixing within the canopy layer and a change in ambient wind directions. Enhanced dilution of particle emission from road traffic by turbulent mixing and ‘decoupling’ from the influence of road traffic are believed to be responsible.     

Plutonium as a chronomarker in Australian and New Zealand sediments: a comparison with Cs

The construction of high resolution chronologies of sediment profiles corresponding to the last 50-100 years usually entails the measurement of fallout radionuclides ²¹⁰Pb and ¹³⁷Cs. The anthropogenic radionuclide, ¹³⁷Cs, originating from atmospheric nuclear weapons testing can provide an important “first appearance” horizon of known age (1954-1955), providing much-needed validation for the sometimes uncertain interpretations associated with ²¹⁰Pb geochronology. However, while ¹³⁷Cs usually provides a strong signal in sediment in the northern hemisphere, total fallout of ¹³⁷Cs in the southern hemisphere was only 25% that of the north and the low activities of ¹³⁷Cs seen in Australian and New Zealand sediments can make its horizon of first appearance somewhat arguable. Low ¹³⁷Cs fallout also limited the size of the 1963-1964 fallout peak, a peak that is usually seen in northern hemisphere sediment profiles but is often difficult to discern south of the equator.This paper shows examples of the use of nuclear weapons fallout Pu as a chronomarker in sediment cores from Australia (3 sites) and New Zealand (1 site). The Pu profiles of five cores are examined and compared with the corresponding ¹³⁷Cs profiles and ²¹⁰Pb geochronologies. We find that Pu has significant advantages over ¹³⁷Cs, including greater measurement sensitivity using alpha spectrometry and mass spectrometric techniques compared to ¹³⁷Cs measurements by gamma spectrometry. Moreover, Pu provides additional chronomarkers associated with changes in the Pu isotopic composition of fallout during the 1950s and 1960s. In particular, the ²³⁸Pu/^239+240Pu activity ratio shows distinct shifts in the early 1950s and the mid to late 1960s, providing important known-age horizons in southern hemisphere sediments. For estuarine and near-shore sediments Pu sometimes has another significant advantage over ¹³⁷Cs due to its enrichment in bottom sediment relative to ¹³⁷Cs resulting from the more efficient scavenging of dissolved Pu in seawater by sediment particles.     

Effect of soil ageing on in vivo arsenic bioavailability in two dissimilar soils

Arsenic (As) bioavailability in spiked soils aged for up to 12 months was assessed using in vitro and in vivo methodologies. Ageing (natural attenuation) of spiked soils resulted in a decline in in vivo As bioavailability (swine assay) of over 75% in soil A (Red Ferrosol) but had no significant effect on in vivo As bioavailability even after 12 months of ageing in soil B (Brown Chromosol). Sequential fractionation, however, indicated that there was repartitioning of As within the soil fractions extracted during the time course investigated. In soil A, the As fraction associated with the more weakly bound soil fractions decreased while the residual fraction increased from 12% to 35%. In contrast, little repartitioning of As was observed in soil B indicating that natural attenuation may be only applicable for As in soils containing specific mineralogical properties.     

Application of an in vivo swine model for the determination of arsenic bioavailability in contaminated vegetables

Considerable information is available in the literature regarding the uptake of arsenic (As) from contaminated soil and irrigation water by vegetables. However, few studies have investigated As speciation in these crops while a dearth of information is available on As bioavailability following their consumption. In this study, the concentration and speciation of As in chard, radish, lettuce and mung beans was determined following hydroponic growth of the vegetables using As-contaminated water. In addition, As bioavailability was assessed using an in vivo swine feeding assay. While As concentrations ranged from 3.0 to 84.2mg As kg(-1) (dry weight), only inorganic As (arsenite and arsenate) was detected in the edible portions of the vegetables. When As bioavailability was assessed through monitoring blood plasma As concentrations following swine consumption of As-contaminated vegetables, between 50% and 100% of the administered As dose was absorbed and entered systemic circulation. Arsenic bioavailability decreased in the order mung beans>radish>lettuce=chard.     

Analysing the influence of different street vegetation on traffic-induced particle dispersion using microscale simulations

Urban vegetation can be viewed as compensation to the environmental drawbacks of urbanisation. However, its ecosystem function is not well-known and, for urban planning, vegetation is mainly considered as an element of urban design. This article argues that planning practice needs to re-examine the impact of vegetation cover in the urban fabric given our evaluation of vegetation's effects on air quality, including the dispersion of traffic-induced particles at street level. Using the three-dimensional microclimate model ENVI-met?, we evaluate these effects regarding the height-to-width ratio of streets flanked by buildings and the vertical and horizontal density of street vegetation. Our results reveal vegetation's effect on particle dispersion through its influence on street ventilation. In general, vegetation was found to reduce wind speed, causing inhibition of canyon ventilation and, consequently, an increase in particle concentrations. Vegetation was also found to reduce wind speed at crown-height and to disrupt the flow field in close vicinity to the canopy. With increasing height-to-width ratio of street canyons, wind speed reduction increases and the disturbance of the flow impacts across a canyon's entire width. We also found that the effect is more pronounced in configurations with poor ventilation, such as the low wind speed, perpendicular inflow direction, and in deep canyons cases.     

Acetamiprid,carbendazim, diuron and thiamethoxam sorption in two Brazilian tropical soils

Sorption of acetamiprid ((E)-N1-[(6-chloro-3-pyridyl)methyl]-N2-cyano-N1-methylacetamidine), carbendazim (methyl benzimidazol-2-ylcarbamate), diuron (N-(3,4-dichlorophenyl)-N, N-dimethyl urea) and thiamethoxam (3-(2-chloro-thiazol-5-ylmethyl)-5-methyl-[1,3,5]oxadiazinan-4-ylidene-N-nitroamine) was evaluated in two Brazilian tropical soils, Oxisol and Entisol, from Primavera do Leste region, Mato Grosso State, Brazil. To describe the sorption process, batch experiments were carried out. Linear and Freundlich isotherm models were used to calculate the K _d and K _f coefficients from experimental data. The K _d values were utilized to calculate the partition coefficient normalized to soil organic carbon (K _oc ). For the pesticides acetamiprid, carbendazim, diuron and thiamenthoxan the K _oc (mL g^{? 1}) values ranged in both soils from 98 – 3235, 1024 – 2644, 145 – 2631 and 104 – 2877, respectively. From the studied pesticides, only carbendazim presented correlation (r² = 0.82 and p < 0.01) with soil organic carbon (OC) content. Acetamiprid and thiamethoxam showed low sorption coefficients, representing a high risk of surface and ground water contamination.     

Dioxin/POPs legacy of pesticide production in Hamburg: Part 1—securing of the production area

α-Hexachlorocyclohexane (HCH), β-HCH, and γ-HCH (lindane) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention. Therefore, the chemicals need to be globally addressed, including the disposal of historic wastes. At most sites, the approximately 85 % of HCH waste isomers were dumped. At a former lindane factory in Hamburg and some other factories the HCH, waste was recycled producing residues with high polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) levels. The soil and ground water under the former pesticide factory was/is highly contaminated with HCH (260 tons), chlorobenzenes (550 tons), and PCDD/PCDF (6 kg toxic equivalents (TEQ)). This contamination did not result from disposal operations but from spillages and leakages during the 30 years of the factory's production history. A containment wall has been constructed around the production area to prevent the dispersal of the pollutants. The ground water is managed by a pump and treat system. Over the last 15 years, approximately 10–30 tons of this pollution reservoir has been pumped and incinerated. For the contaminated production buildings, specific assessment and demolition technologies have been applied. In addition to their HCH waste isomer deposition, former lindane/HCH productions need to be assessed for possible recycling practice of HCH and related PCDD/PCDF contamination of the production area and buildings. Since such recycling activities have taken place at several factories in different countries, the experience of assessment and management of the described production area and contaminated buildings could be valuable. Such assessment could be addressed within the frame of the Stockholm Convention.     

PFOS and PFC releases and associated pollution from a PFC production plant in Minnesota (USA)

Perfluorooctane sulfonate (PFOS) and PFOS-related substances have been listed as persistent organic pollutants in the Stockholm Convention. From August 2012, Parties to the Convention needed to address the use, storage, and disposal of PFOS—including production sites and sites where PFOS wastes have been deposited—in their national implementation plans. The paper describes the pollution in Minnesota (USA) caused by the 3M Company at one of the largest per/polyfluorinated chemical (PFC) production facilities. From early 1950s until the end of 2002, when 3M terminated PFOS and perfluorooctanoic acid (PFOA) production, PFOS, PFOA, and other PFC production wastes were disposed around the plant and in local disposal sites. Discharges from the site and releases from deposits caused widespread contamination of ground and surface waters including local drinking water wells. Fish in the river downstream were contaminated with PFOS to levels that led to fish consumption advisories. Human exposures resulted from ingesting contaminated drinking water, requiring installation of water treatment facilities and alternate water supplies. The critical evaluation of the assessments done revealed a range of gaps in particular of human exposure where relevant exposure pathways including the entire exposure via food have not been taken into consideration. Currently, the exposure assessment of vulnerable groups such as children or Hmong minorities is inadequate and needs to be improved/validated by epidemiological studies. The assessment methodology described for this site may serve—with highlighted improvements—as a model for assessment of other PFOS/PFC production sites in the Stockholm Convention implementation.