Recovery of PET from packaging plastics mixtures by wet shaking table

Recycling requires the separation of materials appearing in a mass of wastes of heterogeneous composition and characteristics, into single, almost pure, component/material flows. The separation of materials (e.g., some types of plastics) with similar physical properties (e.g., specific gravity) is often accomplished by human sorting. This is the case of the separation of packaging plastics in municipal solid wastes (MSW). The low cost of virgin plastics and low value of recycled plastics necessitate the utilization of low cost techniques and processes in the recycling of packaging plastics. An experimental study was conducted to evaluate the feasibility of production of a PET product, cleaned from PVC and PS, using a wet shaking table. The wet shaking table is an environmentally friendly process, widely used to separate minerals, which has low capital and operational costs. Some operational variables of the equipment, as well as different feed characteristics, were considered. The results show that the separation of these plastics is feasible although, similarly to the mineral field, in somewhat complex flow sheets.     

Adsorption of Acid Red 73 on copper dithiocarbamate precipitate-type solid wastes

Three solid wastes, copper N,N'-bis(dithiocarboxy)piperazine ([CuBDP](n)), copper diethyldithiocarbamate (Cu(DDTC)(2)) and copper dimethyldithiocarbamate (Cu(DMTC)(2)), were prepared and tested as adsorbents to remove Acid Red 73 from wastewater. It was found that the three precipitates all could effectively adsorb the dye but their adsorption abilities were rather different. The maximum adsorption amounts of the coordination polymer precipitate [CuBDP](n) reached as high as 364mg g(-1), much greater than those of Cu(DDTC)(2) and Cu(DMTC)(2) (42.9 and 37.8mg g(-1), respectively). The investigation of adsorption models showed these adsorption processes followed the pseudo-second-order kinetic equation and the adsorption balances could be described with both Langmuir and Freundlich isotherms, but the latter seemed to be more suitable. Their adsorption nature was inferred to be physical adsorption and mainly depended on the hydrophobic interaction between these precipitates and Acid Red 73. This is the first example for the reutilization of metal dithiocarbamate precipitates as solid wastes to date.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Polybrominated diphenyl ethers (PBDEs) in human milk from Australia

Polybrominated diphenyl ethers (PBDEs) are flame retardants added to a multitude of products to reduce flammability. PBDEs have been widely detected and quantified in biota and humans in many industrialised countries from the Northern Hemisphere. However data concerning the levels of these compounds in the Australian population and environment remain limited. The objectives of this study were to determine PBDE concentrations and congener profiles in Australian human milk and compare this to concentrations found in other countries. Pooled human milk samples obtained from mothers residing in 12 regions of Australia were analysed by HRGC/HRMS for 18 PBDE congeners. In total, 157 human milk samples collected in 2002 and 2003 were divided into 17 regional pools. PBDEs were detected in all pools of human milk from Australia. The mean+/-standard deviation and median summation operatorPBDE concentrations were 11.1+/-3.2 and 11.0 ng g(-1) lipid, respectively with a range of 6.1-18.7 ng g(-1) lipid. The congener profile was dominated by BDE-47 followed by BDE-99, -100, -153, -154 and -183. Regional differences were evaluated, but no trends were observed. The data suggest regional differences are likely to be small if they exist at all. The concentrations of PBDEs found in Australian human milk were lower than those reported from North America but higher than those reported from Europe and Asia. Our results suggest that the exposure pathways which contribute to the PBDE body burden in the Australian population require a better understanding in order to determine future policy regarding their use and disposal.     

Spatial variance in multimedia mass balance models: comparison of LOTOS-EUROS and SimpleBox for PCB-153

The aim of this study was to determine whether nested generic box models can be used to predict spatial variance. An inter-comparison study was performed for the nested box model SimpleBox, and the spatially resolved model LOTOS-EUROS, using PCB-153 emissions in Europe as an example. We compared the two models concerning (1) average environmental concentrations, (2) spatial concentration variances, (3) spatial concentration patterns (maps), and (4) agreement with measured concentrations for the air and soil compartments. In SimpleBox, the spatial concentration variances and patterns were calculated subsequently for each separate grid cell surrounded by a regional and a continental shell with homogeneous, averaged circumstances. Average European PCB-153 concentrations calculated by LOTOS-EUROS and SimpleBox for the period 1981-2000 agree well for the air and soil compartments. Moreover, the predicted concentrations of both models are in line with the measured PCB-153 concentrations in Europe during that period. For PCB-153, the prediction of spatial concentration variances with the nested multimedia fate model SimpleBox performs adequately in most cases, except for the lower concentration boundary in the air compartment. It is concluded that SimpleBox can be used to predict the spatial maximum and average concentrations of PCB-153 in the air and soil compartments. The proposed method has to be tested systematically for different types of compounds, emission scenarios, environmental compartments and spatial scales in order to allow conclusions about the general applicability of the method.     

Photosynthetic behavior of woody species under high ozone exposure probed with the JIP-test: a review

Visible ozone symptoms on leaves are expressions of physiological mechanisms to cope with oxidative stresses. Often, the symptoms consist of stippling, which corresponds to localized cell death (hypersensitive response, HR), separated from healthy cells by a layer of callose. The HR strategy tends to protect the healthy cells and in most cases the efficiency of chlorophyll to trap energy is not affected. In other cases, the efficiency of leaves to produce biomass declines and the plant loses its photosynthetic apparatus replacing it with a new, more efficient one. Another strategy consists of the production of pigments (anthocyanins), and leaves become reddish. In these cases, the most significant physiological manifestation consists of the enhanced dissipation of energy. These different behavior patterns are reflected in the initial events of photosynthetic activity, and can be monitored with techniques based on the direct fluorescence of chlorophyll a in photosystem II, applying the JIP-test.     

Results of the monitoring program of pesticide residues in organic food of plant origin in Lombardy (Italy)

Organic agriculture, with its restrictions on the use of synthetic chemical inputs, seems to offer a low-residue alternative to conventional methods. In Europe, the Council Regulation n. 2092/91/EEC regulates the production and trade of organic products and foodstuffs; national and regional legislation in Italy gives specific guidance on the surveillance of organic agriculture. However, monitoring of specific chemical residues in organic foodstuffs is part of the regular controls on food, aiming to safeguard consumer's health. Monitoring programs are coordinated at the national level by the Ministry of Health and at local level by Regional authorities. In Lombardy, in accordance with the provisions of the General Directorate of Health of the Region and under the supervision of the 15 Local Health Units, a monitoring program of pesticide residues in food of plant origin is undertaken every year. The International Centre for Pesticides and Health Risk Prevention (ICPS), on behalf of the General Directorate of Health of the Region of Lombardy, has been collecting and elaborating the data resulting from the analysis of food samples, carried out by the local laboratories. During the period 2002-2005, a total of 3508 samples food of plant origin were analyzed for pesticide residues, among which were 266 samples of organic farming products. Commodities were classified into groups (citrus fruits, legumes, vegetables, potatoes, processed products, cereals, and fruit other than citrus) and the outcomes of the analyses were reported by year, origin of the sample and presence/absence of pesticide residues. Results showed that the vast majority of organic farming products were in conformity with the relevant legislation and did not contain detectable pesticide residues. A limited amount of samples had residues at concentration below the Maximum Residue Limit (MRL). Only in one sample the residue level was above the MRL, however it did not pose a concern for public health, as demonstrated by the outcomes of dietary risk assessment. Organic fruits and vegetables can be expected to contain fewer agrochemical residues than conventionally grown alternatives. There is a widespread belief that organic agriculture products are safer and healthier than conventional foods. It is difficult to come to conclusions, but what should be made clear to the consumer is that "organic" does not automatically equal "safe". In the absence of adequate comparative data, additional studies in this area of research are required.     

Influence of humic fractions on retention of isoproturon residues in two Moroccan soils

The influence of different fractions of soil organic matter on the retention of the herbicide isoproturon (IPU) has been evaluated. Water and methanol extractable residues of (14)C labeled isoproturon have been determined in two Moroccan soils by beta -counting-liquid chromatography. The quantification of bound residues in soil and in different fractions of soil humic substances has been performed using pyrolysis/scintillation-detected gas-chromatography. Microbial mineralization of the herbicide and soil organic matter has been also monitored. Retention of isoproturon residues after 30-days incubation ranged from 22% to 32% (non-extractable fraction). The radioactivity extracted in an aqueous environment was from 20% to 33% of the amount used for the treatment; meanwhile, methanol was able to extract another 48%. Both soils showed quantities of bound residues into the humin fraction higher than humic and fulvic acids. The total amount of residues retained into the organic matter of the soils was about 65 % of non-extractable fraction, and this percentage did not change with incubation time; on the contrary, the sorption rate of the retention reaction is mostly influenced by the clay fraction and organic content of the soil. Only a little part of the herbicide was mineralized during the experimental time.     

Monitoring Water Quality and Quantity of National Watersheds in Turkey

National data from the hydrological network for 38 rivers out of 25 watersheds were used to detect spatial and temporal trends in water quality and quantity characteristics between 1995 and 2002. Assessment of water quality and quantity included flow rate, water temperature, pH, electrical conductivity, sodium adsorption rate, Na, K, Ca+Mg, CO₃, HCO₃, Cl, SO₄, and boron. Among the major ions assessed on a watershed basis, Turkish river waters are relatively high in Ca+Mg, Na and HCO₃, and low in K and CO₃. The watersheds in Turkey experienced a general trend of 16% decrease in flow rates between 1995 and 2002 at a mean annual rate of about 4 m³ s^?1, with a considerable spatial variation. Similarly, there appeared to be an increasing trend in river water temperature, at a mean annual rate of about 0.2°C. A substantial proportion of watersheds experienced an increase in pH, in particular, after 1997, with a maximum increase from 8.1 to 8.4 observed in Euphrates (P?R ² values in accounting for variations of pH and water temperature only. The findings of the study can provide a useful assessment of controls over water quality and quantity and assist in devising integrated and sustainable management practices for watersheds at the regional scale in Turkey.     

Temporal Changes in Forest Landscape Patterns in Artvin Forest Planning Unit, Turkey

Understanding the historical dynamics, composition, and environmental disturbances of forest landscapes provides a context for monitoring changes, describing trends, and establishing reference conditions. This study analyses the temporal changes in forest ecosystem structure in Artvin Forest Planning Unit (AFPU), Turkey, during 1972–2002 period based on digitized forest stand type maps using geographic information system (GIS) and interpretation of satellite data. The results showed that there was a net decrease of 450 ha in total forested areas between 1972 and 2002. Forest ecosystem structure changed over time depending on a few factors such as demographic movements, insect outbreaks, dam and road construction, unregulated management actions, and social pressure. In conclusion, temporal changes and the factors affecting these changes should be determined for sustainable management of natural resources.