氨法烟气脱硫技术综述

简述了多种氨法烟气脱硫的原理和技术特点。主要介绍了湿式氨法烟气脱硫技术，为烟气脱硫技术的选择提供参考。     

平原河网地区非点源污染风险差异化分区防控研究

土地利用优化和空间防控策略对非点源污染风险控制及水环境质量的改善具有重要意义。本文以太湖流域典型平原河网地区-上海市青浦区为研究对象,将灰色线性规划模型与最小累积阻力模型相结合,以控制非点源污染风险和增加经济效益、生态效益为目标,进行土地利用结构优化与空间分区防控研究,在空间上划设了水资源保育区、水资源重点防护区、非点源污染一般阻控区、非点源污染中等阻控区及非点源污染重点阻控区,并针对不同分区提出具有针对性的防控措施。与2012年相比,预测2020年优化防控方案下,可减少总氮、总磷的输出10.96%和41.33%。由此表明,优化土地利用结构和构建空间差异化防控机制是有效调控非点源污染风险,实现区域可持续土地利用,促进经济发展和保证生态环境安全的有效途径。     

铜绿微囊藻吸附废水中镍离子的研究

生物吸附法治理重金属废水为目前的一个研究热点。本文以铜绿微囊藻为研究对象,考察铜绿微囊藻藻液和藻粉对重金属镍离子的吸附效果。原子吸收光谱结果表明:藻液和藻粉的去除率分别为23.6%和92%,藻粉相比于藻液有更好的处理效果。傅里叶红外光谱(FTIR)及扫描电镜(SEM)结果表明:吸附重金属后,两者的峰型大致一致,藻粉和藻液的空间结构均发生了明显的改变。上述研究结果证明铜绿微囊藻可以作为一种去除重金属的生物吸附剂,为后续藻类治理重金属污染奠定了理论基础。     

电化学氢化物发生法处理含锑废水及对锑的回收

采用电化学氢化物发生法对模拟含锑废水进行处理,锑与水电解产生的氢形成氢化物从溶液中脱除,而后收集并加热分解锑化氢得到金属锑.实验表明,在酸性条件下对Sb(Ⅲ)去除效果较好,p H=4时去除率为76.1%.Sb(Ⅲ)与电解水产生的氢结合形成锑化氢从溶液中逸出是溶液中锑去除的最主要途径(回收率为66.2%),电沉积和吸附也对锑的去除做出少量贡献.Sb(Ⅴ)须预还原为Sb(Ⅲ)再氢化进行去除.试用了铅、石墨、钨这3种电解阴极材料,铅电极处理效果最佳.     

Authentication of emission monitoring data and optimization of desulfurization in the molybdenum roasting process based on BAT-OOPN and the response surface method

Environmental Science and Pollution Research - This paper presents a quantitative pollutant discharge model for a typical molybdenum roasting plant, which combines the best available technology and...     

A comparison of antibiotics,antibiotic resistance genes,and bacterial community in broiler and layer manure following composting

Animal manure is an important source of antibiotics and antibiotic resistance genes (ARGs) in the environment. However, the difference of antibiotic residues and ARG profiles in layer and broiler manure as well as their compost remains unexplored. In this study, we investigated the profiles of twelve antibiotics, seventeen ARGs, and class 1 integrase gene (intI1) in layer and broiler manure, and the corresponding compost at large-scale. Compared with layer manure, broiler manure exhibited approximately six times more residual tetracyclines, especially chlortetracycline. The relative abundances of qnrS and ermA genes in broiler manure were significantly higher than those in layer manure. The concentration of tetracyclines not only had a significantly positive correlation with tetracycline resistance genes (tetA and tetC) but was also positively correlated with quinolone resistance (qepA, qnrB, and qnrS) and macrolide resistance (ermA and ermT). Most ARGs in manure were reduced after composting. However, the relative abundance of sulfonamide resistance gene sul1 increased up to 2.41% after composting, which was significantly higher than that of broiler (0.41%) and layer (0.62%) manure. The associated bacterial community was characterized by high-throughput 16S rRNA gene sequencing. The relative abundances of thermophilic bacteria had significant positive correlations with the abundance of sul1 in compost. The composting has a significant impact on the ARG-associated gut microbes in poultry manure. Variation partitioning analysis indicated that the change of bacterial community compositions and antibiotics contributed partially to the shift in ARG profiles. The results indicate that at industry-scale production broiler manure had more antibiotics and ARGs than layer manure did, and composting decreased most ARG abundances in poultry manure except for sulfonamide resistance genes.

     

Biocatalyst physiology and interplay: a protagonist of MFC operation

Environmental Science and Pollution Research - Microbial fuel cells (MFC) have been foreseen as a sustainable renewable energy resource to meet future energy demand. In the past, several studies...     

Uptake and distributions of polycyclic aromatic hydrocarbons in cultivated plants around an E-waste disposal site in Southern China

Environmental Science and Pollution Research - Polycyclic aromatic hydrocarbons (PAHs) in air, soil, and cultivated plants at e-waste disposal sites in Taizhou, Zhejiang Province, were determined...     

汽车制造项目环境影响评价技术要点分析

本文在实际开展汽车制造项目环境影响评价的基础上,对汽车制造项目生产工艺及产污环节进行梳理,重点对废气、废水、固废、噪声源强核算过程和方法进行解析,对污染防治措施论证内容进行探讨,同时从清洁生产水平分析、政策相符性分析等方面的技术要点进行总结整理,梳理了目前汽车制造项目环评文件编制的要点核心,指出汽车整车制造项目环境影响评价中应关注的重点问题,主要在于挥发性有机废气源强和含氮、磷及重金属废水源强核算、物料平衡等,为下阶段汽车制造项目建设和环境管理提供参考。     

Fenton法处理竹制品废水生化出水的研究

采用Fenton法对竹制品废水生化出水的脱色和有机物去除进行了研究.在综合考虑经济性和去除效果的基础上,起始COD质量浓度为430 mg·L-1、色度为1 500倍的废水,在反应条件:t=30℃,pH为3.5,ρ(H2O2)=1 665 mg·L-1,c(Fe2+)/c(H2O2)=0.072,反应时间3 h的情况下,Fenton氧化处理后,COD和色度的去除率分别高达87.5%和94.4%.研究发现,色度的去除率要优于有机物(以COD计)的去除率,且受外界因素影响小.GC-MS分析结果表明:经过Fenton处理后,废水中的发色团和助色团基本上完全被去除.中间产物主要是脂类衍生物,副产品有1-碘十三烷和正辛基醚等.