Environmental monitoring model for a drainage basin obtained through spectral analysis of time series

The quality of results of an environmental monitoring plan is limited to the weakest component, which could be the analytical approach or sampling method. Considering both the possibilities and the fragility that sampling methods offer, this environmental monitoring study focused on the uncertainties caused by the time component. Four time series of nutrient concentration at two sampling points (PB1 and PB2) in the Ribeir?o Garcia basin in Blumenau, Brazil, which were significantly correlated to the spatial component, were considered with a 2-hour resolution to develop efficient sampling models. These models were based on the time at which there was the highest tendency toward adverse environmental effects. Fourier spectral analysis was used to evaluated the time series and resulted in two sampling models: (1) the SMCP (sampling model for critical period) that operated with 100% efficiency for registering the highest concentration of nutrients and was valid for 83% of the studied parameters; and (2) the SMGCP (sampling model for global critical period) that operated with 83 and 50% efficiency for PB1 and PB2, respectively.     

Optimization of artificial neural network models through genetic algorithms for surface ozone concentration forecasting

Introduction

This study proposes three methodologies to define artificial neural network models through genetic algorithms (GAs) to predict the next-day hourly average surface ozone (O₃) concentrations. GAs were applied to define the activation function in hidden layer and the number of hidden neurons.

Methods

Two of the methodologies define threshold models, which assume that the behaviour of the dependent variable (O₃ concentrations) changes when it enters in a different regime (two and four regimes were considered in this study). The change from one regime to another depends on a specific value (threshold value) of an explanatory variable (threshold variable), which is also defined by GAs. The predictor variables were the hourly average concentrations of carbon monoxide (CO), nitrogen oxide, nitrogen dioxide (NO₂), and O₃ (recorded in the previous day at an urban site with traffic influence) and also meteorological data (hourly averages of temperature, solar radiation, relative humidity and wind speed). The study was performed for the period from May to August 2004.

Results and discussion

Several models were achieved and only the best model of each methodology was analysed. In threshold models, the variables selected by GAs to define the O₃ regimes were temperature, CO and NO₂ concentrations, due to their importance in O₃ chemistry in an urban atmosphere.

Conclusion

In the prediction of O₃ concentrations, the threshold model that considers two regimes was the one that fitted the data most efficiently.     

Chromium (VI) remediation in aqueous solution by waste products (peel and seed) of mango (Mangifera indica L.) cultivars

The surface group characteristics of mango cultivar peels and seeds were evaluated by infrared spectra, PZC, and functional group composition. The adsorption/reduction of chromium (VI) in aqueous solutions was investigated by varying pH, contact time, initial Cr(VI) concentration, and adsorbent amount. The results show that both peel and seed powders of the mango cultivars showed significant adsorption/reduction capacity for Cr(VI) and that the desorption process obeys pseudo-second-order kinetics. Optimal adsorption occurred at pH 1.0, using a Cr(VI) concentration of 100 mg/L. On average, at pH 1.0, and a concentration of 3 g/L, the maximum adsorption/reduction capacity of Cr(VI) was 83% (peels 76%, seeds 90%). Of the mango powders tested, the most efficient were Tommy seed (100%) and Coite peel (98%) followed by Coite seed (96%) and Tommy peel powders (95%). The adsorption/reduction of Cr(VI) was complete (100%) by the mango seed, in comparison to the peel powders (97%) after 180 min. The data indicates that mango waste products, such as seed and peel powders, are both excellent candidates for the remediation of Cr(VI) from aqueous systems and due to the higher concentration of gallates and galloyl glucosides, the mango seed powders should be the powders of choice for future remediation projects.

     

Analytic Modeling of Rainwater Harvesting in the Brazilian Semiarid Northeast

During the past two decades, government efforts to provide water access to rural communities in Brazil's semiarid Northeast region have focused on building systems to capture and store rainwater, most importantly through the One Million Cisterns Program (P1MC). This article presents an analytic model based on daily precipitation data to evaluate the sustainability of rainwater capture. Application of this model to analysis of the P1MC reveals the heterogeneous climate in this region causes large spatial variability in the effectiveness of this program. In addition, the size of the area of capture, the run‐off coefficient of the roofs, and the amount of first‐flush diversion also have important effects. This analysis demonstrates while rainwater capture can offer sufficient water for drinking, as a stand‐alone solution it cannot meet P1MC objectives of guaranteeing sustainable and universal access to water for drinking, cooking, and basic hygiene in all regions and years.     

Residual tembotrione and atrazine in carrot

Carrot (Daucus carota L.) is a vegetable crop that is grown throughout the year across various regions of Brazil in rotation or in succession to other cultures. Herbicide residual effect has emerged as a concern, because of the possibility of carryover. Thus, the objective of this study was to evaluate the effect of tembotrione and atrazine residues – in mixture and isolated – on carrot planted in succession to corn. The experiment was designed in randomized blocks with five replications. Treatments consisted of tembotrione (50.4 g ha^?1), tembotrione (100.8 g ha^?1), tembotrione + atrazine (50.4 g ha^?1+ 2 L ha^?1), tembotrione + atrazine (100.8 g ha^?1+ 2 L ha^?1), and atrazine (2.00 L ha^?1) applied eight months before carrot seeding, plus a control treatment with no herbicide application. Investigated variables were shoot dry mass, productivity, and classification of carrot roots. The presence of atrazine and tembotrione decreased dry mass in the area, and only tembotrione reduced total root productivity. Thus, there is a carryover effect to tembotrione application that reduces the dry matter accumulation of shoot and total productivity, and an atrazine + tembotrione (100.8 g ha^?1) mixture reduces the total productivity after application of these herbicides to soil.     

Diquat associated with copper sources for algae control: Efficacy and ecotoxicology

The aims of this research were to evaluate the efficacy of copper oxychloride (CuCl₂.3Cu(OH)₂), copper hydroxide (Cu(OH)₂) and diquat (1.1′-ethylene-2.2′-bipyridyldiylium dibromide), isolated and in association with 0.1% of both copper sources, in the control of the unicellular algae Ankistrodesmus gracilis and the filamentous algae Pithophora kewesis, and to determine the acute toxicity of the tested chemicals in Hyphressobrycon eques, Pomacea canaliculata, Lemna minor and Azolla caroliniana. The efficacy was estimated by the methods of chlorophyll a and pheophytin a readings, changed into growth inhibition percentage. Both algae were exposed to the following concentrations: 0.2; 0.4; 0.8; 1.2 mg L^?1 of diquat and its association with the copper sources; and 0.1; 0.3; 0.5; 0.7; 1.0 and 1.5 mg L^?1 in the isolated applications of copper hydroxide and copper oxychloride. An untreated control was kept. The acute toxicity was estimatedby 50% lethal concentration (LC50). The copper sources were effective for A. gracilis control, at rates as high as 0.1 mg L^?1 (>95% efficacy). Isolated diquat and its association with copper hydroxide were both effective at rates as high as 0.4 mg L^?1, with 95 and 88% control efficacy, respectively. The copper oxychloride was effective at 0.2 mg L^?1, with 93% efficacy. None of the tested chemicals and associations was effective on P. kewesis control. The most sensitive non target organism to the tested chemicals was L. minor; the less sensitive was H. eques.     

Leaching and persistence of ametryn and atrazine in red–yellow latosol

This study evaluated the mobility and persistence of atrazine and ametryn in red–yellow latosols using polyvinyl chloride columns with a diameter of 100 mm and a height of 15 cm. The assays simulated 60-mm rainfall events at 10-day intervals for 70 days. The persistence and leaching were evaluated for these two herbicides. The analytes obtained from the samples were quantified by gas chromatography using flame ionization detection. Compared with ametryn, atrazine showed a greater potential to reach depths below 15 cm over 30 days of simulated rain. Ametryn, however, showed greater persistence in soil at 70 days after application. The persistence of atrazine and ametryn in soil under sunlight was 10 and 144 days respectively. Atrazine was more susceptible to sunlight than ametryn because sunlight favored atrazine degradation in hydroxyatrazine. The results indicate that in red–yellow latosol, atrazine has a high leaching potential in short term, but that ametryn is more persistent and has a high leaching potential in long term.     

Energy rating methodology for light-duty vehicles: geographical impact

The aim of this paper was to describe a new energy dependency score methodology and its consequent application to cars sold in twelve regions: Europe (EU-28) and eleven specific countries worldwide (Australia, Brazil, China, India, Japan, Norway, Portugal, Russia, Saudi Arabia, South Africa and USA). This methodology was developed as a potential tool to inform consumers of their choice impact on the country’s economy. This methodology is based on primary energy assessments and origins for each energy pathway associated with a gasoline-, diesel-, natural gas (used for H₂ production)- or electricity (balanced with country electricity mix)-powered vehicle. An energy dependency index was attributed to the best-case (100 % endogenous production) and worst-case (0 % endogenous production) scenarios and consequently weighted with vehicle fuel consumption. This enabled obtaining an energy dependency index (10–0). This index could be assigned to an environmental and social index to provide a sustainability index and therefore complement a road vehicle environmental rating system, providing a combined index rating. Internal combustion engine vehicles and hybrid vehicles (that have oil products as energy source) rate the lowest for almost all locations, with the exception of regions that are energy independent (Norway, Saudi Arabia or Russia). Electric vehicles rank higher when comparing to the other technologies analyzed for all locations in this study. The plug-in hybrid electric vehicle shows generally a rank in an intermediate place, except for Japan where it scores lower than all other technologies.     

Sustaining cultural and biological diversity in rapidly changing communities: the revitalization of the Voladores ritual in northern Veracruz (Mexico)

This paper aims to contribute to the ongoing debate on the protection of cultural and biological diversity, and their interconnectedness. It highlights the importance of understanding the dynamic and complex strategies that cultures are developing to protect their biocultural diversity in the face of the ongoing cultural, economic, and social reductionist transformations occurring worldwide. We analyze Totonac society in the present time, and provide evidence on how cultural revitalization processes are emerging from the grass roots, by focusing on the ceremony of the Voladores, a pre-Hispanic ritual performed by several indigenous groups in Mesoamerica. The preoccupation of Totonac communities to safeguard this millenary tradition fostered a process of dialogue, reinforced local institutions, and catalyzed the development of strategies to preserve a tree species and its habitat.     

Sorption and desorption of sulfentrazone in Brazilian soils

This study was undertaken to obtain information about the behavior of sulfentrazone in soil by evaluating the sorption and desorption of the herbicide in different Brazilian soils. Batch equilibrium method was used and the samples were analyzed by high performance liquid chromatography. Based on the results obtained from the values of Freundlich constants (Kf), we determined the order of sorption (Haplic Planosol < Red-Yellow Latosol < Red Argisol < Humic Cambisol < Regolitic Neosol) and desorption (Regolitic Neosol < Red Argisol < Humic Cambisol < Haplic Planosol < Red-Yellow Latosol) of sulfentrazone in the soils. The process of pesticide sorption in soils was dependent on the levels of organic matter and clay, while desorption was influenced by the organic matter content and soil pH. Thus, the use of sulfentrazone in soils with low clay content and organic matter (low sorption) increases the probability of contaminating future crops.