Horizon scanning for South African biodiversity: A need for social engagement as well as science

Ambio - A horizon scan was conducted to identify emerging and intensifying issues for biodiversity conservation in South Africa over the next 5–10 years. South African biodiversity...     

Evaluation of bisphenol A levels in Nigerian thermal receipts and estimation of daily dermal exposure

Environmental Science and Pollution Research - Bisphenol A (BPA) is a high production volume chemical that has wide industrial applications, especially as a color developer in thermal papers. The...     

Strategies for applying gray water effluent on ornamental sunflower crops

Environmental Science and Pollution Research - In a context of scarcity of good quality water, reuse is a mandatory practice to increase water availability, thus allowing the exploitation of more...     

Impact of chemical oxidation on soil quality

Oxidation treatment helps to reduce the polycyclic aromatic hydrocarbon (PAH) load in contaminated soils but it may also have an effect on the soil quality. The impact of permanganate and Fenton oxidation on soil quality is investigated. Soil quality is restricted here to the potential for plant growth. Soil samples were collected from an agricultural field (S1) and a former coking plant (S4). Agricultural soil was spiked with phenanthrene (PHE) and pyrene (PYR) at two concentrations (S2: 700 mg PHE kg⁻¹, S3: 700 mg PHE kg⁻¹ and 2100 mg PYR kg⁻¹). Soils were treated with both oxidation processes, and analyzed for PAHs and a set of agronomic parameters. A plant germination and growth test was run with rye-grass on treated soils. Results showed that both treatments produced the expected reduction of PAH concentration (from 64% to 97%). Besides, a significant loss of organic C and N, and strong changes in available nutrients were observed. Permanganate treatment increased the specific surface area and the cation exchange capacity in relation to manganese dioxide precipitation, and produced a rise in pH. Fenton oxidation decreased soil pH and increased the water retention capacity. Plant growth was negatively affected by permanganate, related to lower soil permeability and aeration. Both treatments had an effect on soil properties but Fenton oxidation appeared to be more compatible with revegetation.     

Treatment of residual lubricating oil using rice husk-based material as ecological adsorbent

Journal of Material Cycles and Waste Management - One of the most significant environmental problems the world population faces is the inadequate disposal of petroleum derivatives. Lubricant oil is...     

Contamination Levels and Preliminary Assessment of the Technical Feasibility of Employing Natural Attenuation in 5 Priority Areas of Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil

Five priority areas of potential impact by contaminants (API) were investigated at the Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil with the following aims: (i) to identify both organic and inorganic contaminants present in soil and groundwater; (ii) to define the environmental conditions relevant for microbial activity at the site and (iii) to evaluate the feasibility of employing natural attenuation for treatment of the hydrocarbon contamination. One area (API 1) was an uncontrolled landfill, where waste materials from the refinery were deposited between 1954 and 1986, and four areas (API 4, 5, 7 and 11) were located in the operational section of the refinery. Soil contamination by regulated BTEX compounds (benzene, toluene, total xylenes) was restricted to two samples from API 1. Nonregulated ethylbenzene was detected in one soil sample from API 4, one from API 5 and two from API 1. No soil contained regulated PAH above threshold levels. Several nonregulated PAHs were found in 6 soil samples from API 1, 3 soil samples from API 4 and 1 soil sample from API 5. Site soils contained very high aluminium concentrations, but metal contamination was restricted to one soil sample from API 1, which contained nickel above threshold limits. BTEX contamination of groundwater was due mostly to benzene. Of the 17 PAH molecules tested, only naphthalene and 2-methylnaphthalene occurred in groundwater. The sum of total BTEX and total PAH exceeded 200 μg/L in only a few monitoring wells in API 4, 5 and 11 and was always below 2.640 μg/L. Be, Cd, Cr, Cu, Hg, Ni, Se, Ag, Tl and Zn were not detected in groundwater, which was contaminated in a few locations by aluminium (mostly below 1 mg/L), lead (<0.066 mg/L) and arsenic (<0.056 mg/L). S, K, Ca, Mg and Fe were present in groundwater in excess of physiological requirements for microbial growth, but low concentrations of N and P could become growth limiting. However, BTEX were efficiently degraded in saturated and unsaturated zone microcosms and nutrient amendments did not stimulate biodegradation rates measurably. The inorganic carbon pool in groundwater was up to one order of magnitude larger than the organic carbon pool. Total inorganic carbon (TIC) in API groundwater exceeded TIC of clean groundwater by factors of 2 (API 4), 6 (API 5, 7 and 11) or 10 (API 1). Most of the inorganic carbon incorporated into groundwater beneath the refinery originated from biodegradation in the unsaturated soil, which contained a microbiota (10⁶ cells/g on average) capable of growth with most of the pure (benzene, toluene, ethylbenzene and xylene) and mixed hydrocarbons tested (diesel oil, gasoline, naphtha, condensate, aromatic residue and fuel oil). A viscous hydrocarbon paste uncovered in API 1 was insoluble in water but dissolved in dichloromethane. Many organic components of this paste were biodegradable as evidenced by weight reduction of the hydrocarbon paste and by the growth of suspended and attached biomass in saturated zone microcosms, where the paste was the only carbon source. This study indicates that monitored natural attenuation may be a technically feasible and efficient means for plume control in API 1, 4 and 5, provided the plumes in API 4 and 5 are not expanding. This technique is not suitable for contaminant reduction in API 11.     

The copper and aluminum industries: A review of structural changes

In this article the evolution of the aluminium and copper industries is examined, with a view to deriving policy options open to Third World copper producers, which face a declining rate in the growth of consumption. Market structure, company behaviour and performance are analysed for both industries. The impact of energy and general economic crisis in copper and aluminium industries is assessed and market concentration trends are discussed. We conclude that Third World copper producers must change their basic orientation and become seriously involved in market development.     

Evaluation of the electrochemical behavior of pentachlorophenol by cyclic voltammetry on carbon paste electrode modified by humic acids.

Humic substances, or natural recalcitrant organic matter, have an important role in the environment for their plant nutritional functions or for their capability to control the mobility of xenobiotic substances, such as pesticides. To verify the electrochemical behavior of pentachlorophenol (PCP), cyclic voltammetry was used because of its versatility. The following two different electrodes were used: carbon paste electrode (CPE) and carbon paste electrode chemically modified with humic acid (HACMCPE). The results demonstrated that PCP was better accumulated at the HACMCPE electrode, as a consequence of a larger current signal than at the CPE electrode. Cyclic voltammograms showed oxidation steps of PCP itself and probable production of quinonelike compounds.     

Antimicrobial susceptibility of Escherichia coli isolated from shrimp (Litopenaeus vannamei) and pond environment in northeastern Brazil

This study aimed to test the susceptibility of Escherichia coli strains isolated from the water, bottom sediments and individuals cultivated in shrimp farm ponds, to antibiotics belonging to different families, namely B-Lactams: Imipenem (IPM; 10 μ g), Ampicillin (AMP; 10 μ g), Cephalothin (CEP; 30 μ g), Cefoxitin (FOX; 30 μ g), Ceftriaxone (CRO; 30 μ g); Tetracycline: Tetracycline (TCY; 30 μ g); Aminoglycosides: Gentamicin (GEN; 10 μ g), Amikacin (AMK; 30 μ g); Chloramphenicol: Chloramphenicol (CHO; 30 μ g); Fluoroquinolones: Ciprofloxacin (CIP; 5 μ g); Nitrofurans: Nitrofurantoin (NIT; 300 μ g); Sulfonamides: Trimethoprim-Sulfamethoxazole (SXT; 30 μ g); Quilononas: Nalidixic Acid (NAL; 30 μ g). In the laboratory, the method of dissemination (Test Kirby-Bauer) was performed in order to fulfill the antibiogram tests. The results showed high indices of resistance to Imipenem, Cephalothin and Ampicillin. Chloramphenicol, Nitrofurantoin, Cefoxitin, Ceftiaxone and Ciprofloxacin have displayed the highest index of sensitive strains. The antibiotic resistance index (ARI) and the multiple resistance index (MAR) varied within the ranges of 0.068–0.077 and 0.15–0.39, respectively. More than 90.5% of strains of Escherichia coli showed a variety of resistance profiles to the tested antibiotics. The high indices of resistance may be a consequence of indiscriminate use of antibiotics, but also the transfer of resistance through mobile genetic elements found in shrimp farms.