A 13C NMR investigation of CO2 absorption and desorption in aqueous 2,2′-iminodiethanol and N-methyl-2,2′-iminodiethanol

The carbon dioxide capture and release from aqueous 2,2′-iminodiethanol (DEA) and N-methyl-2,2′-iminodiethanol (MDEA) have been investigated by means of ¹³C NMR spectroscopy. We have designed two experimental procedures using a gas mixture containing 12% (v/v) CO₂ in N₂ or air and 0.667 M aqueous solutions of DEA and MDEA. To understand the CO₂–amine reaction equilibria, separate experiments of CO₂ absorption (at 293, 313 and 333 K) and desorption (at boiling temperature, room pressure) were carried out. The ¹³C NMR analysis has allowed us to establish: (1) the percentage of CO₂ stored in solution as HCO₃^?, CO₃^2? and DEA carbamate; (2) the formation of DEA carbamate as a function of absorption temperature and time; (3) the slower decomposition of DEA carbamate than that of bicarbonate. In the experiments planned to test the reuse of the regenerated amines, the absorbent solution was continuously circulated in a closed cycle while it was absorbing CO₂ in the absorber (set at 293 K) and simultaneously regenerating amine in the desorber (set at 388 K). After the equilibrium has been reached (13 h), the CO₂ absorption efficiency is comprised between 84.0% (DEA) and 82.6% (MDEA) and the average amine regeneration efficiency ranges between 69.6% (DEA) and 78.2% (MDEA). Additionally, MDEA is more stable towards thermal degradation than DEA.     

Infrared differential absorption Lidar (DIAL) measurements of hydrocarbon emissions

We report the application of an infrared (IR) differential absorption Lidar (DIAL) system (also capable of ultra violet measurements) built at the National Physical Laboratory (NPL), UK, to field measurements of total site emissions (controlled and fugitive) from petrochemical and landfill installations. The validation of the IR-DIAL was carried out via a series of controlled field experiments including comparison to GC analysis and tests against controlled methane releases from a test stack, all detailing agreements on the order of ±20%. In volatile organic compound (VOC) measurements at a UK petrochemical site it was found that the American Petroleum Institute's methodology of the time for calculating the emitted flux underestimated by a factor of 2.4. Also, in a similar field trial it was found that scaling traditional point measurements at easily accessible flanges and valves to represent all flanges and valves on a site led to an underestimation by a factor of 6. In addition to petrochemical examples we also report field measurements from a landfill site to demonstrate the advantageous of the DIAL technique for monitoring area emission sources. In this case study it was found that active (still being filled) cells resulted in significantly greater VOC emission rates (30 kg h(-1)) than closed (≤ 10 kg h(-1)).     

Use of phytoproductivity data in the choice of native plant species to restore a degraded coal mining site amended with a stabilized industrial organic sludge

Coal mining-related activities result in a degraded landscape and sites associated with large amounts of dumped waste material. The arid soil resulting from acid mine drainage affects terrestrial and aquatic ecosystems, and thus, site remediation programs must be implemented to mitigate this sequential deleterious processes. A low-cost alternative material to counterbalance the affected physico-chemical-microbiological aspects of the degraded soil is the amendment with low contaminated and stabilized industrial organic sludge. The content of nutrients P and N, together with stabilized organic matter, makes this material an excellent fertilizer and soil conditioner, fostering biota colonization and succession in the degraded site. However, choice of native plant species to restore a degraded site must be guided by some minimal criteria, such as plant survival/adaptation and plant biomass productivity. Thus, in this 3-month study under environmental conditions, phytoproductivity tests with five native plant species (Surinam cherry Eugenia uniflora L., C. myrianthum–Citharexylum myrianthum, Inga–Inga spp., Brazilian peppertree Schinus terebinthifolius, and Sour cherry Prunus cerasus) were performed to assess these criteria, and additional biochemical parameters were measured in plant tissues (i.e., protein content and peroxidase activity) exposed to different soil/sludge mixture proportions. The results show that three native plants were more adequate to restore vegetation on degraded sites: Surinam cherry, C. myrianthum, and Brazilian peppertree. Thus, this study demonstrates that phytoproductivity tests associated with biochemical endpoint measurements can help in the choice of native plant species, as well as aiding in the choice of the most appropriate soil/stabilized sludge proportion in order to optimize biomass production.

     

On shadow prices for the measurement of sustainability

The objective of this research is to discuss the direction of the bias of the existing estimates of genuine savings (also known as adjusted net savings). Such estimates rely on observed prices and quantities of investment and natural resource extraction. This has two consequences: first, it causes an overestimation of the shadow price of productive natural resources; second, it leads to omitting the depreciation of environmental services and amenities. We use simple numerical models to determine the path of optimal development under different assumptions. We find that the existing estimates of genuine savings are likely to be biased upward for countries with high levels of pollution, and biased downward for natural resource extracting countries.     

Aluminium flows in vehicles: enhancing the recovery at end-of-life

The transportation sector constitutes the major end-use market for aluminium-containing products and expectations for the future do indicate that aluminium will increase at 140 kg per vehicle. Moreover, up to 75 % aluminium recycled in Europe is used in transportation: thus, metal scrap recovered from ELVs is a key lever to act for closing material cycles. However, although the management chain of ELVs has an established procedure and aluminium scrap is usually recovered in shredding plants, a considerable fraction of the metal particles ends up in the light fraction called car fluff and is then landfilled. In this study we investigated potential of enhancing the recovery of aluminium scrap from the light fluff treatment. With this goal, the quantity of aluminium embedded in the Italian transport sector in the last 62 years was estimated, and a campaign of characterization in size and shape distribution of aluminium particles in the light fluff output has been carried out. The results estimated up to about 560,000 tons of metal are potentially recoverable from the treatment of light fluff at current operating conditions, but relevant improvements may be achieve when size and shape distribution criteria are adopt to implement eddy currents separation for a quantitative metal recovery.     

Container vs. dacha: The psychological effects of temporary housing characteristics on earthquake survivors

This research investigated whether the psychological wellbeing of earthquake survivors two years after the traumatic event would vary as a function of type of temporary housing. A comparison of people assigned to containers, converted into mobile homes, vs. wooden dachas vs. a control group, that had not lost their homes in the earthquake, revealed reliable effects of housing type. Compared to those in containers, earthquake victims assigned to dachas were more satisfied with and more attached to their temporary homes and reported greater psychological wellbeing (fewer psychological stress symptoms, less discomfort and a lesser feeling of being dominated by the situation). Also, home attachment and satisfaction with one's home mediated the psychological wellbeing, suggesting that the attitudes towards different types of temporary housing play a causal role in post-traumatic stress reactions. Practical implications for emergency interventions following natural disasters are discussed.     

Chemical characterisation of spent rechargeable batteries

A chemical characterisation of used batteries can give useful information to implement suitable recycling techniques and to estimate the flux of the different materials recovered. This work is aimed to provide quantitative data about the composition of mixed batteries (in particular, Ni–Cd, Ni-MH and Li-ion batteries) collected in a Northern Italian town in order to evaluate the feasibility of recovery processes applied to the selected material. The higher concentration of metals in the <3 mm fraction suggested that significant quantities of valuable elements could be recovered: in particular, for a kg of the <3 mm fraction deriving from disassembled batteries, about 390 g Ni and 330 g Cd can be recovered from Ni–Cd, 630 g Ni, 80 g Co from Ni-MH and 250 g Co, 110 g Ni, 120 g Cu from Li-ion ones. Leaching tests applied to the same fractions, to assess possible contaminant releases, resulted in low metal content in aqueous solutions (except for Al and Fe, the concentrations of all metals remained below 1 mg/kg). Even so, great care is required in all handling activities due to the high pH values of leachate solutions.     

Using textile industrial sludge,sewage wastewater,and sewage sludge as inoculum to degrade recalcitrant textile dyes in a co-composting process: an assessment of biodegradation efficiency and compost phytotoxicity

Environmental Science and Pollution Research - Recalcitrant dyes found in textile wastewater represent a threat for sustainable textile production due to their resistance to conventional...     

Field Surveys of Ozone Symptoms on Spontaneous Vegetation. Limitations and Potentialities of the European Programme

Within the European intensive forest monitoring programme, the native vegetation on permanent Level II plots has been monitored for visible ozone injuries. The main purpose of the programme is to assess the potential risks for the forest vegetation and the natural ecosystems at the intensive monitoring plots. During the first years of the programme the surveys were qualitative, reporting only the number and the name of the symptomatic species in selected Light Exposed Sampling Site. In 2003 a new plot design was tested, based on the distribution of a number of miniplots along the edge of the forest, so as to obtain quantitative findings about the occurrence and distribution of the symptoms. The problems that still persist are related to: (i) the forest edge assessed for ozone symptoms may have a different floristic composition from the Level II plot itself; (ii) the anthropic pressure and the disturbances affecting the forest edge alters the floristic composition; (iii) the variability of the plant composition in the forest edge, which makes comparability difficult between different sites; and (iv) the evaluation of symptoms in several species that have not yet been experimentally tested. Further difficulties are due to the fact that symptoms observed in the field are often aspecific and cannot, therefore, be attributed solely to the phytotoxic action of ozone. To improve the effectiveness of the European programme, it is necessary: (i) to individualise and select common sensitive plant species for homogeneous ecological regions; (ii) to enhance experimental activities to test the sensitivity of a large number of plant species.     

The environmental fate of heavy metals arising from a MSW incineration plant

Pollutant fluxes from municipal solid waste (MSW) incinerators are of a certain concern, especially gaseous emissions from the stack, which constitute the major effluent from the plant. In this work, heavy metals in soil and vegetation sampled in different sites around the plant are compared with those found in the gaseous emissions from an incinerator: the suspected source and environmental matrices are observed together, in order to detect a possible relationship of cause and effect, using statistical methods. The incinerator examined, regarding dimension and technology, can be considered a typical Italian one. Heavy metal concentrations in soil and vegetation show a clear dependence on sampling year; similar behaviour can be found in emission fluxes referring to the same years. A dependence on the distance from the incinerator is also apparent. This study supplies a methodological approach that can be easily extended and applied to other suspected contamination sources.