Volatile organic compounds produced during the aerobic biological processing of municipal solid waste in a pilot plant

The volatile organic carbon (VOC) and odours emitted during the aerobic biological processing of municipal solid waste (MSW) was studied in a pilot-scale reactor. VOCs were detected by different techniques on solid waste samples and the outlet air stream, before and after a biofilter. Organic compounds (alpha-pinene, beta-myrcene, D-limonene) were also measured in condensate water and leachate from the process. Results showed uniformity in the composition of the air in the solid waste samples, air sampled during the process and condensed water, indicating a matrix-derived origin of these compounds. Leachates, however, contained substances with a quite different molecular structure from the compounds identified in the gaseous fraction. Most of the substances in the gaseous effluent had a hydrocarbon-like structure, mainly terpenoids. The odour produced and detected through olfactometry agreed with GC-MS analyses. This was true above all for terpenes.     

Long-term effect of sewage sludge application on soil humic acids

Sewage sludges are used in agriculture because they act as a fertilizer. Long-term studies are needed to evaluate the effect of sewage sludge on soil properties by paying particular attention to the soil organic matter. Soil plots were amended for 10 years with 1Mg dry matter ha(-1)year(-1) of sewage sludge. Chemical parameters such as total organic carbon (TOC), N, C/N ratio and CEC were determined when this period ended. Moreover, TOC was fractionated into humified and non-humified fractions. Humic acids (HA) were isolated and studied by elemental analysis, DRIFT, (1)H NMR and CPMAS 13C NMR spectroscopies. At the end of the tests, compared to the control soil, the sludge-amended soil did not exhibit change in total organic C and related humified fractions. However, the HA composition of the soil treated with sludge had developed an HA composition closer to that of the HA-sludge as a result of the enrichment of recalcitrant fractions contained in the sludge.     

Assessment of ozone visible symptoms in the field: perspectives of quality control

The second UN/ECE ICP-Forests Intercalibration Course on the Assessment of Ozone Injury on European Tree Species was carried out in August 2001 at Lattecaldo (Canton Ticino, CH) and Moggio (Lombardy, I). Forty-eight experts from several European countries participated in the exercises and assessed visible symptoms of ozone injury both in open-top chambers (OTC) (Lattecaldo) and under open field (Moggio) conditions. Evaluation of the results indicated a large variability among the teams and call for adequate training of the observers prior to symptom assessment for quality assurance purposes. Highest variability was found for the species developing unclear symptoms which could be confused with senescence processes; such species should not be used in the field. The authors provide suggestions to improve the reliability of the ozone injury assessment on forest plant species.     

Spray-dry desulfurization of flue gas from heavy oil combustion

An experimental investigation on sulfur dioxide removal in a pilot-scale spray dryer from the flue gas generated by combustion of low-sulfur (S) heavy oil is reported. A limewater slurry was sprayed through an ultrasonic two-fluid atomizer in the spray-dry chamber, and the spent sorbent was collected downstream in a pulse-jet baghouse together with fly ash. Flue gas was sampled at different points to measure the desulfurization efficiency after both the spray-dry chamber and the baghouse. Parametric tests were performed to study the effect of the following variables: gas inlet temperature, difference between gas outlet temperature and adiabatic saturation temperature, lime-to-S ratio, and average size of lime particles in the slurry. Results indicated that spray drying is an effective technology for the desulfurization of low-S fuel oil flue gas, provided operating conditions are chosen carefully. In particular, the lowest gas inlet and outlet temperatures compatible with baghouse operation should be selected, as should a sufficiently high lime-to-S ratio. The attainment of a small lime particle size in the slurry is critical for obtaining a high desulfurization efficiency. A previously presented spray-dry flue gas desulfurization model was used to simulate the pilot-scale desulfurization tests, to check the ability of the model to predict the S capture data and its usefulness as a design tool, minimizing the need for pilot-scale experimentation. Comparison between model and experimental results was fairly good for the whole range of calcium/S ratios considered.     

Lichen biomonitoring of trace metals in the Pistoia area (central northern Italy)

The epiphytic lichen Parmelia caperata (L.) Ach. was used as bioaccumulator of the heavy metals Cd, Cr, Cu, Hg, Ni, Pb and Zn in the environs of the town of Pistoia (central northern Italy). The concentrations of Cd, Cr, Ni, Hg and Pb were comparable with those found in areas not subject to atmospheric pollution. Copper and especially Zn were found in rather high concentrations. Fertilizers and pesticides were the main source of atmospheric contamination.     

Crown condition surveys in Italian forests: issues in reporting findings

This study examines defoliation and discoloration findings collected throughout the Italian Level I network between 1997 and 2000. Prior to this period no Quality Assurance procedures had been implemented, so that earlier findings cannot be considered reliable. The aim of the study is to compare differentindices used in reporting findings, in order to determine the full potential and limitations of each. In international surveys,findings are normally expressed in terms of individual trees presenting a defoliation level greater than 2 %; this criterion,however, has been challenged since it is not based on scientificevidence. By analysing the distribution of defoliation values(grouped in 5% classes) relating to the main species (Fagus sylvatica, Quercus pubescens, Quercus cerris, Picea abies), the study examines the behaviour of statistical indices such as the median, the mode and the mean. Instead of using the traditional 25% threshold to determine the part of the population with the highest defoliation values, a procedureis suggested whereby a different threshold can be determined foreach species. It is established based on the 90° percentile of cumulative defoliation values recorded over the four-year period. Each index used to report findings possessesits own information potential, and the findings may at times appear contradictory. The use of a combined defoliation and discoloration index (Ilce = Lacking Crown Equivalent Index) is also proposed, but the results obtained do not differin substance from the results relating to defoliation alone. Thefunctional limitations of this index are due mainly to the way the data are collected: for this reason suggestions are made onhow to improve the procedure in future surveys.     

Source apportionment and location by selective wind sampling and Positive Matrix Factorization

In order to determine the pollution sources in a suburban area and identify the main direction of their origin, PM_2.5 was collected with samplers coupled with a wind select sensor and then subjected to Positive Matrix Factorization (PMF) analysis. In each sample, soluble ions, organic carbon, elemental carbon, levoglucosan, metals, and Polycyclic Aromatic Hydrocarbons (PAHs) were determined. PMF results identified six main sources affecting the area: natural gas home appliances, motor vehicles, regional transport, biomass combustion, manufacturing activities, and secondary aerosol. The connection of factor temporal trends with other parameters (i.e., temperature, PM_2.5 concentration, and photochemical processes) confirms factor attributions. PMF analysis indicated that the main source of PM_2.5 in the area is secondary aerosol. This should be mainly due to regional contributions, owing to both the secondary nature of the source itself and the higher concentration registered in inland air masses. The motor vehicle emission source contribution is also important. This source likely has a prevalent local origin. The most toxic determined components, i.e., PAHs, Cd, Pb, and Ni, are mainly due to vehicular traffic. Even if this is not the main source in the study area, it is the one of greatest concern. The application of PMF analysis to PM_2.5 collected with this new sampling technique made it possible to obtain more detailed results on the sources affecting the area compared to a classical PMF analysis.     

Food web of a confined and anthropogenically affected coastal basin (the Mar Piccolo of Taranto) revealed by carbon and nitrogen stable isotopes analyses

Carbon and nitrogen stable isotope analysis was used to examine the food web of the Mar Piccolo of Taranto, a coastal basin experiencing several anthropogenic impacts. Main food sources (algal detritus, seaweeds, particulate organic matter (POM) and sediment organic matter (SOM)) and benthic and pelagic consumers were collected during two contrasting seasons (June and April), at four sites distributed over two inlets, and characterized by different level of confinements, anthropogenic inputs and the presence of mussels farming. δ¹³C values of organic sources revealed an important contribution of POM to both planktonic and benthic pathways, as well as the influence of terrigenous inputs within both inlets, probably due to high seasonal land runoff. Although δ¹³C of both sources and consumers varied little between sampling sites and dates, δ¹⁵N spatial variability was higher and clearly reflected the organic enrichment in the second inlet as well as the uptake of anthropogenically derived material by benthic consumers. On the other hand, within the first inlet, the isotopic composition of consumers did not change in response to chemical contamination. However, the impact of polluted sediments near the Navy Arsenal in the first inlet was detectable at the level of the macrobenthic trophic structure, showing high dominance of motile, upper level consumers capable to face transient conditions and the reduction of the more resident deposit feeders. We therefore underline the great potential of matching stable isotope analysis with quantitative studies of community structure to assess the effects of multiple anthropogenic stressors.     

Use of agro-industrial organic sludge amendment to remediate degraded soil: chemical and eco(geno)toxicological differences between fresh and stabilized sludge and establishment of application rates

Soil degraded by coal mining activities can be remediated by amendment with agro-industrial organic sludge. However, the environmental impacts associated with this management practice must be properly addressed. In this context, the objective of this study was to evaluate the eco(geno)toxicity of a fresh and a stabilized sludge before use in a laboratory soil remediation test. Chemical analysis of the complex mixtures (degraded soil, fresh sludge, and stabilized sludge) was carried out, as well as a battery of eco(geno)toxicity tests on microbiological enzymes (fluorescein hydrolysis), earthworms, and higher plants (including Vicia faba genotoxicity test), according to published methodologies. The results of these tests showed that fresh sludge was more toxic than sludge stabilized over 6 months toward earthworms and higher plants (lettuce, corn, and wild cabbage), while phyto(geno)toxicity tests with V. faba indicated the same genotoxicity levels for the two types of sludge. In the soil remediation simulation using different mixtures of degraded soil and stabilized sludge, the proportions of 50:50 % (dry weight basis) provided the lowest phyto(geno)toxicity effects and this mixture can be used for the revegetation of the contaminated site.