A case for 2-body material removal in prime LED sapphire substrate lapping and polishing

An alternative, and potentially better, means to process prime LED sapphire wafers is proposed. A brief history of material removal mechanisms suggests that brittle materials can be abraded in a ductile regime and that this can be a superior mode of removal. Advantages in material removal rate, surface finish and subsurface damage for a 2-body ductile removal of sapphire are shown relative to 3-body material removal. A major difficulty with this approach may be getting the LED manufacturing industry to understand that the appearance of the sapphire surface is quite different, unfamiliar yet predictable. Finally, some potential alternative process approaches are discussed that utilize 2-body material removal.     

Exploring development strategies of agricultural systems of Hill Tracts of Chittagong in Bangladesh

This study presents the determinants and development strategies of agricultural systems of the Hill Tracts of Chittagong in Bangladesh using multivariate analysis. A total of 18 selected variables transformed into 4 factors extracted by principal factor method explain 77.21 % of the total variability of the agricultural systems in Chittagong Hill Tracts (CHT), and the agricultural systems in CHT are classified as extensive, semi-intensive, intensive and mixed using cluster analysis. Agricultural extension services, credit facilities and infrastructure such as distance to markets are identified as the main factors responsible for the changes in agricultural systems in CHT. Finally, it has been suggested to provide knowledge and skills to the farmers in CHT through agricultural extension using farmer field schools, microcredit using Grameen Bank approach and facilities such as improved transportation to the markets for better price and higher profit from the sale of the agricultural products to enable the farmers to move from shifting cultivation to environmentally and economically sound semi-intensive or intensive agricultural systems.     

Risk-based maintenance (RBM): a quantitative approach for maintenance/inspection scheduling and planning

The overall objective of the maintenance process is to increase the profitability of the operation and optimize the total life cycle cost without compromising safety or environmental issues. Risk assessment integrates reliability with safety and environmental issues and therefore can be used as a decision tool for preventive maintenance planning. Maintenance planning based on risk analysis minimizes the probability of system failure and its consequences (related to safety, economic, and environment). It helps management in making correct decisions concerning investment in maintenance or related field. This will, in turn, result in better asset and capital utilization.

This paper presents a new methodology for risk-based maintenance. The proposed methodology is comprehensive and quantitative. It comprises three main modules: risk estimation module, risk evaluation module, and maintenance planning module. Details of the three modules are given. A case study, which exemplifies the use of methodology to a heating, ventilation and air-conditioning (HVAC) system, is also discussed.     

Explosibility of polyamide and polyester fibers

The current research is aimed at investigating the explosion behavior of hazardous materials in relation to aspects of particulate size. The materials of study are flocculent (fibrous) polyamide 6.6 (nylon) and polyester (polyethylene terephthalate). These materials may be termed nontraditional dusts due to their cylindrical shape which necessitates consideration of both particle diameter and length. The experimental work undertaken is divided into two main parts. The first deals with the determination of deflagration parameters for polyamide 6.6 (dtex 3.3) for different lengths: 0.3 mm, 0.5 mm, 0.75 mm, 0.9 mm and 1 mm; the second involves a study of the deflagration behavior of polyester and polyamide 6.6 samples, each having a length of 0.5 mm and two different values of dtex, namely 1.7 and 3.3. (Dtex or decitex is a unit of measure for the linear density of fibers. It is equivalent to the mass in grams per 10,000 m of a single filament, and can be converted to a particle diameter.) The explosibility parameters investigated for both flocculent materials include maximum explosion pressure (P_max), size-normalized maximum rate of pressure rise (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT). ASTM protocols were followed using standard dust explosibility test equipment (Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven). Both qualitative and quantitative analyses were undertaken as indicated by the following examples. Qualitative observation of the post-explosion residue for polyamide 6.6 indicated a complex interwoven structure, whereas the polyester residue showed a shiny, melt-type appearance. Quantitatively, the highest values of P_max and K_St were obtained at the shortest length and finest dtex for a given material. For a given length, polyester displayed a greater difference in P_max and K_St at different values of dtex than polyamide 6.6. Long ignition delay times were observed in the BAM oven (MIT measurements) for polyester, and video framing of explosions in the MIKE 3 apparatus (MIE measurements) enabled observation of secondary ignitions caused by flame propagation after the initial ignition occurring at the spark electrodes.     

Analysis of pitting corrosion on steel under insulation in marine environments

Corrosion under insulation (CUI) is an important issue in marine environments. Pitting corrosion is a significant contributor to this issue. The ability to understand and model pitting behavior is integral to designing and maintaining assets in marine environments to decreased costs and increase safety and productivity. This paper reviews and analyses six categories of pitting knowledge to assess the current depth and breadth of understanding and to identify knowledge gaps in each category. The categories investigated are: identification of pitting, experimental methods, mechanism of pitting, modeling of pitting corrosion rates, remaining life assessment modeling, and risk-based inspections. This analysis finds that the depth of knowledge on pitting corrosion rate modeling and pitting mechanism is limited and requires further detailed study. The outcome of such study will strengthen pitting corrosion rate modeling, the accuracy of fitness-for-service assessments and risk-based inspection strategies.     

Musculoskeletal Symptoms In Workers

Self-report measures of musculoskeletal discomfort are a widely used and generally accepted risk factor for musculoskeletal disorders in epidemiologic research. The aim of this study was to investigate the prevalence of musculoskeletal symptoms in packing workers. A cross-sectional study of 75 workers was carried out using a modified Nordic questionnaire. Prevalence was determined with the percentage of positive responses to questions on musculoskeletal symptoms. Odds ratios and 95% confidence intervals were the measures of association between prevalent musculoskeletal symptoms and demographic factors; they were determined with logistic regression. Most musculoskeletal symptoms in workers were from the low back (44.0%), shoulders (33.3%) and neck (32.0%). Years worked were strongly significantly associated with musculoskeletal symptoms and pain in the neck, shoulders and wrists/hands, P< .001-.050. Hazards related to repetitive movements and discomfort postures could be reduced with stretching exercises, rotation schedules and through new engineering solutions.     

The 1998 Flood in Bangladesh: Is Different Targeting Needed During Emergencies and Recovery to Tackle Malnutrition?

Bangladesh suffered the century's worst flood during July-October 1998 and appealed for assistance. To provide information for appropriate interventions to tackle nutritional problems, a rapid assessment survey was conducted to look at the nutritional situation, problems encountered by the community, their coping mechanisms and rehabilitation priorities in six rural areas. The survey was repeated after four months to measure the outcome of activities during the flood and the necessity for future assistance. There were 3,048 children measured in both surveys (1,597 and 1,451). The sample of most interest was a sub-group of 180 children present in two previous independent surveys. The analysis found that while moving from the crisis period to post-flood phase there was evidence of a 'crossover phenomenon' in the recovery pattern of nutritional status. Sixty-eight per cent of the children who were malnourished (WHZ < -2SD) during the crisis period (18 per cent) recovered enough to cross the cut-off point and became normal after four months. Another 8 per cent of children (9 per cent of all normal) who were normal during the crisis period, after four months had deteriorated to be malnourished. Thus, despite there being a shift in the overall distribution of nutritional status, there has been another shift that reduced the net effect. Subsequent episodes of diarrhoea, access to food and loan burden had also influenced the recovery pattern of the children's nutritional status as evident from the statistically significant associations. These findings raise questions about targeting acute malnutrition during emergencies, and using the same criteria during both the crisis and rehabilitation phases.     

Determination of human error probabilities for offshore platform musters

The focus of this work is on prediction of human error probabilities during the process of emergency musters on offshore oil and gas production platforms. Due to a lack of human error databases, and in particular human error data for offshore platform musters, an expert judgment technique, the Success Likelihood Index Methodology (SLIM), was adopted as a vehicle to predict human error probabilities. Three muster scenarios of varying severity (man overboard, gas release, and fire and explosion) were studied in detail. A panel of 24 judges active in the offshore oil and gas industry provided data for both the weighting and rating of six performance shaping factors. These data were subsequently processed by means of SLIM to calculate the probability of success for 18 muster actions ranging from point of muster initiator to the final actions in the temporary safe refuge (TSR). The six performance shaping factors considered in this work were stress, complexity, training, experience, event factors and atmospheric factors.     

Inherently safer design based on rapid risk analysis

The importance of inherently safer design (ISD) as a strategy to minimize risk of accidents in chemical process industries is being repeatedly stressed in recent years. The increasing number, frequency, and extents of damage caused by such accidents across the world have contributed to this thinking. However even as the need for ISD is being underscored, there are very few reports on precise methods to implement this concept. Significant recent reports are by Berge (1993Berge, 1995)who has suggested a scenariobased design procedure in which construction of accident scenarios in a structured manner is made the basis of ISD. We have been developing and applying the concept of rapid risk analysis ( [Khan & Abbasi, 1995] , [Khan & Abbasi, 1996] , [Khan & Abbasi, 1997a] , [Khan & Abbasi, 1997b] , [Khan & Abbasi, 1998a] and Khan &; Abbasi, 1998b). In this paper we present an approach to ISD utilizing this concept. We believe, as detailed in this paper, that this approach is a significant improvement upon Berge's procedure in terms of ease, speed, and effectiveness.     

Methane emissions and related physicochemical soil and water parameters in rice–fish systems in Bangladesh

Lowland rice fields constitute a semi aquatic environment, which is potentially suitable for fish production. Little is known about the effect of fish on greenhouse gas emissions from integrated rice–fish systems. An experiment was carried out at the Bangladesh Agricultural University to assess the effect of the stocking of fish on methane emissions from rice fields. Common carp, Cyprinus carpio L., and Nile Tilapia, Oreochromis niloticus (L.) were stocked in a mixed culture and subjected to three different input regimes: (1) urea fertilization according to the recommendation of the Bangladesh Rice Research Institute (BRRI), (2) supplementary feeding at 2 × maintenance level and (3) an elevated feeding schedule where 4 × maintenance level was fed initially and 2 × maintenance level towards the end of the growth period. Rice only with urea fertilization according to BRRI-recommendation was included as the control. The presence of fish increased methane emissions in all three rice–fish treatments. Average emission over the cropping season was 34, 37, and 32 mg m⁻² h⁻¹ in the rice–fish treatments, respectively, and 20 mg m⁻² h⁻¹ in rice only. Apart from an increase in methane emission, a significant drop (p < 0.05) in floodwater pH and dissolved oxygen concentration was observed in the rice–fish plots. Both parameters were the lowest in the treatment where a higher feeding rate was provided. Due to the fish activity, floodwater in the rice–fish treatments was more turbid, as reflected in higher particulate inorganic matter (PIOM). An elevated level of dissolved methane was observed in the floodwater of the feed supplemented rice–fish plots. Methane emissions showed negative correlation with morning and afternoon pH of the floodwater (r = −0.46; r = −0.56, p < 0.001) and morning and afternoon dissolved oxygen level (r = −0.53; r = −0.46, p < 0.001). Positive correlations were recorded between morning and afternoon floodwater temperature (r = 0.49; r = 0.44, p < 0.001) and with air temperature (r = 0.54, p < 0.001). The results suggest that the stocking of fish has an increasing effect on methane emissions from rice fields.