Physicochemical factors and sources of particulate matter at residential urban environment in Kuala Lumpur

Long-term measurements (2004–2011) of PM₁₀ (particulate matter with an aerodynamic diameter <10 μm) and trace gases (carbon monoxide [CO], ozone [O₃], nitrogen oxide [NO], oxides of nitrogen [NO_x], nitrogen dioxide [NO₂], sulfur dioxide [SO₂], methane [CH₄], nonmethane hydrocarbon [NMHC]) have been conducted to study the effect of physicochemical factors on the PM₁₀ concentration. In addition, this study includes source apportionment of PM₁₀ in Kuala Lumpur urban environment. An advanced principal component analysis (PCA) technique coupled with absolute principal component scores (APCS) and multiple linear regression (MLR) has been applied. The average annual concentration of PM₁₀ for 8 yr is 51.3 ± 25.8 μg m^?3, which exceeds the Recommended Malaysian Air Quality Guideline (RMAQG) and international guideline values. Detail analysis shows the dependency of PM₁₀ on the linear changes of the motor vehicles in use and the amount of biomass burning, particularly from Sumatra, Indonesia, during southwesterly monsoon. The main sources of PM₁₀ identified by PCA-APCS-MLR are traffic combustion (28%), ozone coupled with meteorological factors (20%), and windblown particles (1%). However, the apportionment procedure left 28.0 μg m^?3, that is, 51% of PM₁₀ undetermined.

Implications: Air quality is always a top concern around the globe. Especially in the South Asian regions, measures are not yet sufficient; as revealed in our studies, the concentrations of particulate matters exceed the tolerable limits. Long-term data analysis and characterization of particular matters and their sources will aid the policy makers and the concerned authority to adapt measures and policies according to the circumstances. Additionally, similar intensive studies will give insight about future implications of air quality management.     

Assessment of sewage sludge bioremediation at different hydraulic retention times using mixed fungal inoculation by liquid-state bioconversion

Sustainable, environmental friendly, and safe disposal of sewage treatment plant (STP) sludge is a global expectation. Bioremediation performance was examined at different hydraulic retention times (HRT) in 3–10 days and organic loading rates (OLR) at 0.66–7.81 g chemical oxygen demand (COD) per liter per day, with mixed filamentous fungal (Aspergillus niger and Penicillium corylophilum) inoculation by liquid-state bioconversion (LSB) technique as a continuous process in large-scale bioreactor. Encouraging results were monitored in treated sludge by LSB continuous process. The highest removal of total suspended solid (TSS), turbidity, and COD were achieved at 98, 99, and 93 %, respectively, at 10 days HRT compared to control. The minimum volatile suspended solid/suspended solid implies the quality of water, which was recorded 0.59 at 10 days and 0.72 at 3 days of HRT. In treated supernatant with 88 % protein removal at 10 days of HRT indicates a higher magnitude of purification of treated sludge. The specific resistance to filtration (SRF) quantifies the performance of dewaterability; it was recorded minimum 0.049 × 10¹² m kg^?1 at 10 days of HRT, which was equivalent to 97 % decrease of SRF. The lower OLR and higher HRT directly influenced the bioremediation and dewaterability of STP sludge in LSB process. The obtained findings imply encouraging message in continuing treatment of STP sludge, i.e., bioremediation of wastewater for environmental friendly disposal in near future.     

Arsenic and heavy metal concentrations in surface soils and vegetables of Feni district in Bangladesh

An investigation of various heavy metals including the arsenic (As) poisoning in soils and vegetables in five upazillas under Feni district of Bangladesh was performed by neutron activation technique using the neutron irradiation facilities of TRIGA MARK II research reactor at Bangladesh Atomic Energy Research Establishment (BAERE), Savar, Dhaka. A total of 30 samples (15 surface soils and 15 foodstuffs) were studied in five Upazillas namely as, Sonagazi, Dagan Bhuiya, Feni Sadar, Fulgazi and Parsuram of Feni district taking three samples of each kind from each upazilla. Samples of each kind together with the standard reference material (SRM) were irradiated in the same neutron flux and the gamma-rays of nuclides from the irradiated samples were assessed and screened for As, Br, U, Th, Cr, Sc, Fe, Zn and Co in soils and As, Br, Na, K, Cr, Sc, Fe, Zn and Co in vegetables (i.e; eddoe, taro, green papaya, plantain, potato, callaloo, bottle ground and carambola). The measurement of gamma-rays was carried out by means of a calibrated high resolution HPGe detector. The concentration of product nuclides containing in the irradiated samples was determined from the peak count-rates of prominent gamma-lines for the corresponding nuclides. Among all contaminants, only As, Zn and Cr for both samples were focused because of their higher values compared with the local as well as the world typical values. The present results revealed that the mean levels of As in Parsuram, Feni Sadar and Pulgazi upazillas are higher than the world typical value of 2 mg/kg. The mean values of Zn and Cr for all upazillas are higher than the world typical values 32 and 27.9 mg/kg, respectively. For the case of vegetables, the mean concentration of As is found only in Eddoe (5.33 ppm) and Taro (1.46 ppm) collected from Sonagazi and Feni Sadar upazilla; which are higher than the values in Samta (0.1 ppm for eddoe and 0.44 ppm for taro) under Jessore district of Bangladesh. The mean concentrations of Zn and Cr in all kinds of vegetables are higher compared with the existing local values as well as the world typical values. The mean estimated daily dietary intake of As, Zn and Cr from vegetables are found to be 0.105, 12.47 and 3.53 mg respectively, which are higher than the recommended values of some countries. The consumption of toxic metals in vegetables is a risk for public health in the studied area.     

Deterioration of water quality of Surma river

Surma River is polluted day by day by human activities, poor structured sewerage and drainage system, discharging industrial and household wastes. The charas (natural channels) are responsible for surface runoff conveyance from its urban catchments to the receiving Surma River. Water samples have been collected from a part of Surma River along different points and analyzed for various water quality parameters during dry and monsoon periods. Effects of industrial wastes, municipal sewage, and agricultural runoff on river water quality have been investigated. The study was conducted within the Chattak to Sunamganj portion of Surma River, which is significant due to the presence of two major industries – a paper mill and a cement factory. The other significant feature is the conveyors that travel from India to Chattak. The river was found to be highly turbid in the monsoon season. But BOD and fecal coliform concentration was found higher in the dry season. The water was found slightly acidic. The mean values of parameters were Conductivity 84–805 μs; DO: dry-5.52 mg/l, monsoon-5.72 mg/l; BOD: dry-1mg/l, monsoon-0.878 mg/l; Total Solid: dry-149.4 mg/l, monsoon-145.7 mg/l. In this study, an effort has been taken to investigate the status of concentration of phosphate (PO⁻⁴) and ammonia–nitrogen (NH₄–N) at four entrance points of Malnichara to the city, Guali chara, Gaviar khal and Bolramer khal. Data has been collected from March–April and September–October of 2004. Concentrations have been measured using UV Spectrophotometer. Although the phosphate concentration has been found within the limit set by DOE for fishing, irrigation and recreational purposes, however ammonia–nitrogen has been found to exceed the limit.     

Analysis and evaluation of nitrate levels in groundwater at Al-Hashimiya area, Jordan

Water with high nitrate concentration (NO₃ ⁻) is unfit for human consumption, especially when its concentration exceeded the threshold limit (50 mg/l) recommended by the health authorities such as the World Health Organization (WHO). In Jordan, there is a great concern for determination and monitoring organic and inorganic pollutants that may reach groundwater. Nitrate is highly mobile and present in domestic, agricultural and industrial waste in Jordan, and thus this study focused initially on nitrate as both a contaminant of concern and as an indicator of potential groundwater contamination. The present study determined the extent of nitrate contamination in groundwater in the study area and examined the likely sources of NO₃ ⁻. A total of 248 groundwater samples were collected from 16 wells in different sites of Al-Hashimiya area, Zerqa Governorate, Jordan, and investigated for NO₃ ⁻ concentrations. Moreover, measurements of temperature, electrical conductivity and pH were carried out in the field. Analysis was carried out according to the methods described by the American Public Health Association (APHA). Results showed that there was a dramatic increasing in NO₃ ⁻ concentrations from the year 2001 to 2006 for some selected wells in the present study. NO₃ ⁻ concentration in 2006 was ranged from 10 to 330 mg/l with an average of 77 mg/l. Overall, groundwater had elevated nitrate concentration with 92% of the samples containing more than 20 mg/l NO₃ ⁻, indicating the influence of human activities. This study has shown that there is a strong correlation between the nitrate concentration and the wastewater effluents as a source of pollution.     

Mobilization of arsenic from subsurface sediments by effect of bicarbonate ions in groundwater

Arsenic leaching by bicarbonate ions has been investigated in this study. Subsurface sediment samples from Bangladesh were treated with different carbonate and bicarbonate ions and the results demonstrate that the arsenic leaching efficiency of the carbonate solutions decreased in the order of Na2CO3>NaHCO3>BaCO3>MnCO3. Sodium carbonate and bicarbonate ions extracted arsenic most efficiently; Na2CO3 leached maximum 118.12 microg/l of arsenic, and NaHCO3, 94.56 microg/l of arsenic from the Ganges delta sediments after six days of incubation. The arsenic concentrations extracted in the batch experiments correlated very well with the bicarbonate concentrations. The kinetics study of arsenic release indicates that arsenic-leaching rate increased with reaction time in bicarbonate solutions. Bicarbonate ions can extract arsenic from sediment samples in both oxic and anoxic conditions. A linear relationship found between arsenic contents in core samples and those in leachates suggests that dissolved arsenic concentration in groundwater is related to the amount of arsenic in aquifer sediments. In batch experiment, bicarbonate solutions effectively extracted arsenic from arsenic adsorbed iron oxyhydroxide, reflecting that bicarbonate solutions may mobilize arsenic from iron and manganese oxyhydroxide in sediments that are ubiquitous in subsurface core samples. Carbonate ion may form complexes on the surface sites of iron hydroxide and substitute arsenic from the surface of minerals and sediments resulting in release of arsenic to groundwater. Like in the batch experiment, arsenic and bicarbonate concentrations in groundwater of Bangladesh correlated very well. Therefore, bicarbonate leaching is presumed to be one important mechanism to mobilize arsenic in bicarbonate dominated reducing aquifer of Bangladesh and other parts of the world as well.     

Wind speed pattern data and wind energy potential in Pakistan: current status,challenging platforms and innovative prospects

Environmental Science and Pollution Research - Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand,...     

Consumption of heavy metal contaminated foods and associated risks in Bangladesh

This study investigated the magnitude of heavy metal contamination and determined the carcinogenic as well as non-carcinogenic risks associated with selected food consumption in Bangladesh. Commonly consumed varieties of rice, vegetables, and fish samples were analyzed to measure the concentrations of heavy metals such as cadmium, chromium, lead, arsenic, manganese, nickel, and zinc. These staple food items showed the greatest probabilities of heavy metal contamination in different phases of their production and marketing. Wide variations of metal concentrations were observed. Specifically, estimated daily intakes of arsenic and cadmium exceeded allowable daily intakes in all three food items. Toxicity scores of the metals were evaluated, and a comprehensive risk assessment was conducted to quantify the risks associated with the daily food consumption. Except for cadmium and lead in vegetables, all the contaminants present in each food item posed significant levels of carcinogenic risks up to 2.99?×?10^?3 compared to the EPA recommended carcinogenic risk level of 1.0?×?10^?6. Cadmium and arsenic intake due to rice consumption also posed unsafe levels of non-carcinogenic risks of 4.587 and 6.648, respectively, compared to the EPA recommended non-carcinogenic risk level of 1.0. Finally, a revised set of permissible limits was proposed for the heavy metals detected in the food items. Those permissible limits would ensure the risks associated with food consumption below the allowable carcinogenic and non-carcinogenic risk levels. Thus, this comprehensive approach would provide guidelines to formulate adequate control measures and regulatory limits of toxic metals in foods produced and marketed in Bangladesh.     

Application of inherent safety principles to dust explosion prevention and mitigation

The aim of the current work is to explicitly link the inherent safety principles of minimization, substitution, moderation and simplification with strategies for dust explosion prevention and mitigation. A brief review of inherent safety and its basic principles is first given. This is followed by a discussion of various ways in which the dust explosion hazard can be minimized, substituted, moderated and simplified. Particular attention is paid to the relationship between each inherent safety principle and (i) various dust explosibility parameters, (ii) alternate methods of processing, (iii) selection of process equipment, and (iv) development and implementation of safe-work procedures. Original research results are presented, along with industrial case studies and previously published results that have been reinterpreted in terms of inherent safety and its basic principles. It is anticipated that this research will be of value to industry as a complement to the relatively well-established suite of engineered and procedural dust explosion risk reduction measures.