北京市不同地区土壤中的球囊霉素荧光特征及其与土壤理化性质的关系

球囊霉素相关土壤蛋白是一种菌根真菌产生的耐热糖蛋白,因其与微生物密切联系而常用来表征土壤的健康状况.由于球囊霉素相关土壤蛋白的提取过程中容易产生干扰物质,影响了这个指标在土壤状态评估方面的进一步应用.本研究采集了北京北部山区,中部城区以及南部郊区的土壤样品,使用三维荧光-平行因子模型技术解析球囊霉素相关土壤蛋白中可溶性有机物的荧光特征,将土壤类球囊霉素蛋白分解为5个荧光组分,分别为微生物源UVC腐殖质类物质、UVA人为来源腐殖质类物质、微生物来源的氧化醌物质、土壤富里酸类物质和类蛋白物质,蛋白质在其中所占比例为0~20%.不同采样区域的荧光特征比较显示,球囊霉素土壤相关土壤蛋白的5个荧光组分总体稳定,与山区相比较,城区和郊区的类蛋白质组分受人类活动影响降低,氧化醌类物质组分含量升高.不同采样点的理化特征结果显示,以城市建设和耕作为代表的人类活动减少了土壤中的含水率、有机质含量以及总氮含量.比较球囊霉素相关土壤蛋白的荧光特征与土壤理化特征的相关性结果显示,球囊霉素土壤相关蛋白浓度、UVA腐殖质组分、UVC腐殖质组分与土壤有机质含量、总氮含量显著相关,具有表征土壤健康状况的潜力.     

辽河口浮游细菌和附着细菌群落结构及多样性分析

通过MiSeq高通量测序在盐度梯度变化下对辽河口海水中浮游细菌群落和附着细菌群落结构变化特点及与环境因子间相关性进行研究。环境因子包括盐度（S）、温度（T）、溶解氧（DO）、悬浮物（SS）、叶绿素a（Chl a）、细菌生产力（BP）、化学需氧量（COD）、硝酸盐（NO₃-N）、磷酸盐（PO₄-P）、硅酸盐（SiO₃-Si）和铵态氮（NH₄-N）。在对辽河口不同盐度区域表层选取代表站位并对其海水环境因子、细菌群落多样性指数、相似度、结构组成进行统计分析。结果显示:由河口向外海过程中水体的S和Chl a逐渐升高,DO、BP、COD以及N、P、Si营养盐的浓度逐渐降低。河口淡水区域β变形菌数量占优势,海水区域α变形菌和γ变形菌的数量逐渐增多。群落结构与环境因子相关性分析结果表明浮游细菌对环境因子变化较为敏感,而附着细菌对环境因子的变化敏感度较低。浮游细菌丰度与S、PO₄-P和BP有显著相关性（P < 0.01）,相关性系数分别为-0.963、0.996和0.995;附着细菌丰度与SS的相关性最为显著,相关性系数为0.997（P < 0.01）,此外与NH₄-N和Chl a也有显著相关性。实验结果表明S、PO₄-P、BP、DO和COD是影响浮游细菌丰度的影响因子,浮游细菌丰度与SS、NH₄-N和Chl a关系较为密切。相对附着细菌而言,浮游细菌在河口生态系统物质循环和能量流动方面发挥着更加重要的作用。     

The biological effect of metal ions on the granulation of aerobic granular activated sludge

As a special biofilm structure, microbial attachment is believed to play an important role in the granulation of aerobic granular activated sludge (AGAS). This experiment was to investigate the biological effect of Ca^2 +, Mg^2 +, Cu^2 +, Fe^2 +, Zn^2 +, and K⁺ which are the most common ions present in biological wastewater treatment systems, on the microbial attachment of AGAS and flocculent activated sludge (FAS), from which AGAS is always derived, in order to provide a new strategy for the rapid cultivation and stability control of AGAS. The result showed that attachment biomass of AGAS was about 300% higher than that of FAS without the addition of metal ions. Different metal ions had different effects on the process of microbial attachment. FAS and AGAS reacted differently to the metal ions as well, and in fact, AGAS was more sensitive to the metal ions. Specifically, Ca^2 +, Mg^2 +, and K⁺ could increase the microbial attachment ability of both AGAS and FAS under appropriate concentrations, Cu^2 +, Fe^2 +, and Zn^2 + were also beneficial to the microbial attachment of FAS at low concentrations, but Cu^2 +, Fe^2 +, and Zn^2 + greatly inhibited the attachment process of AGAS even at extremely low concentrations. In addition, the acylated homoserine lactone (AHL)-based quorum sensing system, the content of extracellular polymeric substances and the relative hydrophobicity of the sludges were greatly influenced by metal ions. As all these parameters had close relationships with the microbial attachment process, the microbial attachment may be affected by changes of these parameters.     

Cf/SiC 复合材料表面 HfO2涂层的制备及其抗热冲击性能研究

目的研究等离子喷涂条件下Cf/SiC复合材料表面HfO_2涂层的物相、显微组织及其抗热冲击性能。方法通过水热合成和喷雾造粒制备出HfO_2粉体,并利用等离子喷涂在Cf/SiC复合材料表面制备HfO_2涂层,研究涂层的物相、显微组织和抗热冲击性能。结果水热合成的纳米HfO_2为单斜相结构,颗粒的平均粒径为10~15nm;等离子喷涂制备的HfO_2涂层组织中存在微裂纹和孔隙,涂层为单斜相结构,且经1350℃热处理后涂层的相结构未发生改变。等离子喷涂的HfO_2涂层与Cf/SiC复合材料基体结合良好,未观察到涂层、基体间界面分离的现象。经1350℃、50周次的空冷热冲击试验后,涂层未发生破坏失效;在1350℃水冷热冲击条件下,热循环20次时涂层表面出现剥落,27次时脱落面积50%。结论通过等离子喷涂制备的HfO_2涂层与Cf/SiC复合材料基体结合良好,涂层能够抵御1350℃空冷、50周次热冲击,且未发生破坏失效,涂层的1350℃水冷热循环寿命达27次。     

2-氯酚驯化对厌氧污泥微生物种群结构的影响

用古细菌特异性引物ARC21F/ARC958R和酸杆菌特异性引物31F/907R,对2.氯酚(2-chlorophenol,2-CP)驯化前后厌氧颗粒污泥样品总DNA进行了16S rDNA的聚合酶链式反应(polymerase chain reaction,PeR)、克隆、测序及序列分析,研究了2-CP驯化前后厌氧颗粒污泥中微生物种群结构的变化.结果表明,2-CP驯化前后厌氧颗粒污泥中存在共有的古细菌菌种:Methanothrix soehngenii、Methanosaeta concilii 及 uncultured euryarchaeote 等.2-CP驯化后的厌氧污泥中出现了特有的微生物Methanobacterium aarhusense、Methanobacterium curvum及 Methanobacterium beijingense等,而接种污泥中特有的一些古细菌发生了消亡.对该厌氧体系酸杆菌的分析表明,2-CP驯化前后的厌氧颗粒污泥中存在共有的微生物菌种:uncultured bacterium、unculturedAcidobacterium和unknown Actinomycete(MC 9).经2-CP驯化后,接种污泥中特有的微生物Desulfotomaculum sp.176、uncultured Deltaproteobacterium n8d及uncultured bydrocarbon seep bacterium等发生消亡,并出现了特有的微生物uncultured Holophage/Acidobacterium、uncultured Acidobacteria bacterium及unidentified Acidobacterium.     

塔玛亚历山大藻溶藻细菌筛选方法的初步研究

旨在对溶藻细菌筛选方法的摸索.从辽宁大连周边海域分离的37株海洋细菌中,尝试用试管法筛选对塔玛亚历山大藻具有溶藻能力的功能细菌.试管法即首先在试管中进行藻菌共培养,待初步筛选出合适菌株后,再用三角瓶来验证初筛结果.结果显示:试管初筛选出的5株溶藻菌株,同样在三角瓶中显示了它们溶藻能力,证明试管法用于筛选溶藻细菌是可行的.     

曝气生物滤池处理效果影响因素试验研究

曝气生物滤池具有占地面积小、处理效率高等特点而成为分散型污水处理技术的优先选择,为了进一步优化该工艺的运行控制,通过试验研究了有机负荷、水力停留时间、气水比等因素对曝气生物滤池处理效能的影响,结果表明曝气生物滤池对有机负荷、水力停留时间、气水比变化具有良好的适应能力。在温度为20℃～25℃时,COD负荷在1-4．5kg／m^3·d之间、气水比在3：1～10：1之间、水力停留时间在30min-60min之间时,COD去除效果良好,平均去除率可达85％。COD负荷、停留时间和气水比对硝化反应影响显著,增加COD负荷对反应器的硝化能力有明显的抑制作用,反应器需要充分硝化时的进水有机负荷应控制在1．5kgCOD／m^3·d以内较为合适。停留时间在30min-60min、气水比在3：1～10：1范围内变化时,NH4^＋-N去除率增加显著。     

单斜相纳米氧化锆基低温SCR催化剂脱硝机制研究

以纳米m-ZrO2为载体,用浸渍法制备出MnOx-CeO2/m-ZrO2催化剂,考察反应温度、活性组分负载量对催化剂NH3-SCR脱硝活性影响,探讨催化剂表面织构特征,分析催化剂脱硝活性机制.结果表明,在低温脱硝温度范围,提高反应温度、增加活性组分负载量,有利于催化剂脱硝效率的增加.110℃时,2.5%MnOx-CeO2/m-ZrO2脱硝效率为55.5%,15%MnOxCeO2/m-ZrO2脱硝效率达93.5%.XRD、BET、XPS、H2-TPR表征结果表明,催化剂表面具有良好的氧化还原能力,表面织构对脱硝反应有利.NH3-TPD测试显示,MnOx-CeO2/m-ZrO2催化剂的脱硝反应机制为:NH3吸附在催化剂表面的Lewis酸性位和Brnsted酸性位上,通过反应生成相应中间产物NH2NO或NH4NO2,中间产物进一步分解最终转变为N2和H2O;催化剂总脱硝反应效率中,在Lewis酸性位上的脱硝反应占比较大.     

新乡市地表水体HCHs和DDTs的分布特征及生态风险评价

为了解新乡市地表水中HCHs和DDTs的分布特征及生态风险,采集新乡市18个地表水样并测定其中HCHs和DDTs的含量,采用概率密度函数重叠面积法和安全阈值法评价了HCHs和DDTs的生态风险.结果表明,新乡市地表水中HCHs和DDTs的质量浓度范围分别为1.28~49.2 ng·L-1和0.42~12.3 ng·L-1,与世界各地的地表水中HCHs和DDTs残留质量浓度相比属于中等污染水平.异构体比值表明HCHs污染的主要来源是林丹的使用,而DDTs的残留来源于工业品DDTs的使用.生态风险评价基于DDD、γ-HCHs和p,p'-DDT的暴露浓度以及相应的毒性数据,概率密度函数重叠面积法和安全阈值法均表明了这3种有机氯农药中DDD的风险最大,其次是γ-HCHs,p,p'-DDT的生态风险最小;安全阈值法进一步表明DDD、γ-HCHs和p,p'-DDT超过影响10%水生生物的概率分别为10.2%、5.94%和0.01%.     

Investigation on the relationship between the fine particle emission and crystallization characteristics of gypsum during wet flue gas desulfurization process

The relationship between the fine particles emitted after desulfurization and gypsum crystals in the desulfurization slurry was investigated, and the crystallization characteristics varying with the operation parameters and compositions of the desulfurization slurry were discussed. The results showed that the fine particles generated during the desulfurization process were closely related to the crystal characteristics in the desulfurization slurry by comparison of their morphology and elements. With the higher proportion of fine crystals in the desulfurization slurry, the number concentration of fine particles after desulfurization was increased and their particle sizes were smaller, indicating that the optimization of gypsum crystallization was beneficial for the reduction of the fine particle emission. The lower pH value and an optimal temperature of the desulfurization slurry were beneficial to restrain the generation of fine crystals in the desulfurization slurry. In addition, the higher concentrations of the Fe^3 + ions and the F⁻ ions in the desulfurization slurry both promoted the generation of fine crystals with corresponding change of the morphology and the effect of the Fe^3 + ions was more obvious. With the application of the desulfurization synergist additive, it was beneficial for the inhibition of fine crystals while the thinner crystals were generated.