粤东一个类型独特的锡矿床

作者对西岭凤地山锡矿床的成矿地质条件,特别是火山构造、岩浆演化与成矿的关系进行了研究,认为:西岭锡矿是一个与火山侵出相碎斑熔岩时、空、成因关系密切的次火山热液脉状锡矿床。根据西岭锡矿的地质环境和成矿物理化学条件、矿质、水介质来源建立了理想的成矿模式。进而指出粤东斑岩锡矿的远景。西岭锡矿类型的确定,对粤东和赣南火山岩地区锡矿普查具有重要意义。     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

A model for non-specific toxicity with aquatic organisms over relatively long periods of exposure time

Experimental data have shown that the internal lethal concentrations of halobenzenes for aquatic organisms decreased with exposure time. In this paper, a model based on the concept of life expectancy reduction was developed to describe this relationship. The model was verified with experimental data for fish (Gambusia affinis) and juvenile crab (Porturius pelagicus(L)). It is proposed that long term non-specific toxicity can be measured as the reduction of the life expectancy of the exposed organism per unit internal concentration (or volume fraction) of the toxic compound. The model can be used to estimate internal lethal concentration at any given exposure period and vice versa. The model can also be used to estimate chronic values of the internal concentration, of the toxicants. It provides a useful tool for assessment of environmental risk of organic compounds in aquatic ecosystems.     

Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.     

Cu,Cr and As distribution in soils adjacent to pressure-treated decks,fences and poles

Chromated copper arsenate (CCA)-treated wood has been widely used in the Southeastern United States to protect wood products from microbial and fungal decay. The aims of this study were to (1). determine the distribution of arsenic (As), chromium (Cr), and copper (Cu), in soils surrounding CCA-treated wood structures such as decks, fences and poles; and (2). evaluate the impacts of these structures on As, Cr and Cu loading of the soils. Profile and lateral soil samples were collected under CCA-treated decks and adjacent to poles and fences. The results showed elevation of As, Cr and Cu concentrations close to and under the structures, with mean As concentrations as high as 23 mg x kg(-1) close to utility poles compared with less than 3 mg x kg (-1) at distances of about 1.5 m away. Concentrations of As, Cr, and Cu decreased with depth in areas close to CCA-treated poles. However, these results were only apparent in relatively new structures. A combination of weathering and leaching with time may have reduced the impact in older poles. Increased concentrations of As, Cu and Cr were also observed close to CCA-treated decks and fences, with age showing a similar impact. These results are helpful for CCA-treated wood product users to determine the safe use of these structures.     

Manganese uptake and accumulation by the hyperaccumulator plant Phytolacca acinosa Roxb. (Phytolaccaceae)

The perennial herb Phytolacca acinosa Roxb. (Phytolaccaceae), which occurs in Southern China, has been found to be a new manganese hyperaccumulator by means of field surveys on Mn-rich soils and by glasshouse experiments. This species not only has remarkable tolerance to Mn but also has extraordinary uptake and accumulation capacity for this element. The maximum Mn concentration in the leaf dry matter was 19,300 microg/g on Xiangtan Mn tailings wastelands, with a mean of 14,480 microg/g. Under nutrient solution culture conditions, P. acinosa could grow normally with Mn supplied at a concentration of 8000 micromol/l, although with less biomass than in control samples supplied with Mn at 5 micromol/l. Manganese concentration in the shoots increased with increasing external Mn levels, but the total mass of Mn accumulated in the shoots first increased and then decreased. At an Mn concentration of 5000 micromol/l in the culture solution, the Mn accumulation in the shoot dry matter was highest (258 mg/plant). However, the Mn concentration in the leaves reached its highest value (36,380 microg/g) at an Mn supply level of 12,000 micromol/l. These results confirm that P. acinosa is an Mn hyperaccumulator which grows rapidly, has substantial biomass, wide distribution and a broad ecological amplitude. This species provides a new plant resource for exploring the mechanism of Mn hyperaccumulation, and has potential for use in the phytoremediation of Mn-contaminated soils.     

Human exposure and health risk of alpha-, beta-, gamma- and delta-hexachlorocyclohexane (HCHs) in Tianjin, China

The dynamic exposures to HCHs of individuals born between the years 1913 and 1993 in Tianjin have been simulated by connecting a fugacity model (IV) with a multimedia exposure model. Ingestion is the most important pathway for human beings to take up HCHs, and concentrations in the human body correlate with body weight changes. Accumulations of HCHs were derived assuming that the degradation in human body behaved linearly. The health risk of exposure to HCHs was measured using cancer risk and loss of life expectancy (LLE), and LLE was modified from its original definition to incorporate a dynamic calculation that takes variances in exposure into account. Monte-Carlo simulations were run to analyze the uncertainties of the model.     

Study of using microfiltration and reverse osmosis membrane technologies for reclaiming cooling water in the power industry.

A study of using dual membrane technologies, microfiltration (MF) and reverse osmosis (RO), for reclaiming blowdown of the cooling tower was conducted at ZJK power plant, Hebei province, China. The study shows that the combined MF-RO system can effectively reduce water consumption in the power industry. The results indicate that MF process is capable of producing a filtrate suitable for RO treatment and achieving a silt density index (SDI) less than 2, turbidity of 0.2 NTU. The water quality of RO effluent is very good with an average conductivity of about 40 micros/cm and rejection of 98%. The product water is suitable for injection into the cooling tower to counteract with cooling water intrusion. After adopting this system, water-saving effectiveness as expressed in terms of cycles of concentration could be increased from 2.5-2.8 times to 5 times.     

TiO2 photocatalytic degradation of PCBs in soil-water systems containing fluoro surfactant

Titanium dioxide-mediated photodegradation of Polychlorinated biphenyls (PCBs) in soil/aqueous systems with added fluorinated surfactant was investigated. PCBs can bind tightly to organic matter in the soil, especially in aged, contaminated soil. Experiments showed an effective PCB photocatalytic degradation in mixed systems of soil/clay with anionic fluorinated surfactant FC-143 and TiO2. The FC-143 surfactant is stable in this photochemical process. PCB degradation rates in samples followed the order: spiked clay > spiked soil > Hudson River bank soil. The results suggest that anionic fluorinated surfactant may form semimicelles and/or admicelles on the surface of positively charged TiO2. The hydrophobic surface of TiO2 can provide a nonpolar phase that acts as a partioning medium for hydrophobic PCBs. Therefore, PCBs in soil can be released to the semimicelle and/or admicelle on the TiO2 surface and are effectively photodegraded in a dispersion containing anionic fluorinated surfactant. The combination of surfactant extraction and photooxidation forms the basis for a novel two-stage process for the removal and destruction of PCBs from soil.     

Windblown dust contributes to high PM2.5 concentrations

The revised National Ambient Air Quality Standards for PM include fine particulate standards based upon mass measurements of PM2.5. It is possible in arid and semi-arid regions to observe significant coarse mode intrusion in the PM2.5 measurement. In this work, continuous PM10, PM2.5, and PM1.0 were measured during several windblown dust events in Spokane, WA. PM2.5 constituted approximately 30% of the PM10 during the dust event days, compared with approximately 48% on the non-dusty days preceding the dust events. Both PM10 and PM2.5 were enhanced during the dust events. However, PM1.0 was not enhanced during dust storms that originated within the state of Washington. During a dust storm that originated in Asia and impacted Spokane, PM1.0 was also enhanced, although the Asian dust reached Washington during a period of stagnation and poor dispersion, so that local sources were also contributing to high particulate levels. The "intermodal" region of PM, defined as particles ranging in aerodynamic size from 1.0 to 2.5 microns, was found to represent a significant fraction of PM2.5 (approximately 51%) during windblown dust events, compared with 28% during the non-dusty days before the dust events.