城市内涝的时空分布特征及其成因分析 ——以呼和浩特市区为例

以呼和浩特市区为例,通过收集历史内涝数据与实地调查,共收集到78处积水点的具体位置、内涝范围和发生频率等实际数据,并对其内涝成因进行分析.结果表明:2016—2019年内涝灾害较2010—2016年频繁;其次,内涝主要发生在6—9月间,尤其集中在7月.空间分布特征表明,赛罕区积水点分布密度最大,而玉泉区最小.相关性分析...     

2012年全球地震灾害概要

2012年是近百年来全球地震的轻灾年.根据本年度国内外地震灾害资料,总结出2012年全球地震灾害的主要数据和“双震”成灾、沿“地球脐带”的分布特征.     

黄河断流成因及人文思考

日益严峻的黄河断流现象严重地影响了黄河流域经济和社会的可持续发展，也制约了西部大开发战略的实施。在分析了黄河断流的危害、成因的基础上，提出了在工程措施之外，要从人口、法律制度、产业结构等人文因素方面入手缓解黄河断流。     

聚合氯化铝污泥对磷的吸附动力学及热力学

聚合氯化铝污泥（polyaluminium chloride sludge,PACS）是指以聚合氯化铝（PAC）为混凝剂的城镇给水厂在生产过程中所产生的污泥。采用批量吸附实验考察了PACS对磷的吸附动力学及热力学行为。结果表明,吸附反应发生1 h后,PACS对磷的吸附量达到平衡吸附量的75%～90%,随后PACS对磷的...     

A study on the short-term effect of particulate matter pollution on hospital visits for asthma in children in Shanghai,China

Environmental Geochemistry and Health - Recently, particulate matter pollution has been worsening, which has been affecting the asthma visits in children. In this study, we assessed the short-term...     

Optimization of the O3/H2O2 process with response surface methodology for pretreatment of mother liquor of gas field wastewater

• Real ML-GFW with high salinity and high organics was degraded by O₃/H₂O₂ process. • Successful optimization of operation conditions was attained using RSM based on CCD. • Single-factor experiments in advance ensured optimal experimental conditions. • The satisfactory removal efficiency of TOC was achieved in spite of high salinity. • The initial pH plays the most significant role in the degradation of ML-GFW. The present study reports the use of the O₃/H₂O₂ process in the pretreatment of the mother liquor of gas field wastewater (ML-GFW), obtained from the multi-effect distillation treatment of the gas field wastewater. The range of optimal operation conditions was obtained by single-factor experiments. Response surface methodology (RSM) based on the central composite design (CCD) was used for the optimization procedure. A regression model with Total organic carbon (TOC) removal efficiency as the response value was established (R² = 0.9865). The three key factors were arranged according to their significance as: pH>H₂O₂ dosage>ozone flow rate. The model predicted that the best operation conditions could be obtained at a pH of 10.9, an ozone flow rate of 0.8 L/min, and H₂O₂ dosage of 6.2 mL. The dosing ratio of ozone was calculated to be 9.84 mg O₃/mg TOC. The maximum removal efficiency predicted was 75.9%, while the measured value was 72.3%. The relative deviation was found to be in an acceptable range. The ozone utilization and free radical quenching experiments showed that the addition of H₂O₂ promoted the decomposition of ozone to produce hydroxyl radicals (·OH). This also improved the ozone utilization efficiency. Gas chromatography-mass spectrometry (GC-MS) analysis showed that most of the organic matters in ML-GFW were degraded, while some residuals needed further treatment. This study provided the data and the necessary technical supports for further research on the treatment of ML-GFW.     

Mechanisms behind the accelerated extracellular electron transfer in <Emphasis Type="Italic">Geobacter sulfurreducens</Emphasis> DL-1 by modifying gold electrode with self-assembled monolayers

Modification of electrode surface with carboxylic acid terminated alkanethiol self-assembled monolayers (SAMs) has been found to be an effective approach to improve the extracellular electron transfer (EET) of electrochemically active bacteria (EAB) on electrode surface, but the underlying mechanism behind such enhanced EET remains unclear. In this work, the gold electrodes modified by mercapto-acetic acid and mercaptoethylamine (Au-COOH, Au-NH₂) were used as anodes in microbial electrolysis cells (MECs) inoculated with Geobacter sulfurreducens DL-1, and their electrochemical performance and the bacteria-electrode interactions were investigated. Results showed that the Fe(CN) ₆ ^3–/4– redox reaction occurred on the Au-NH₂ with a higher rate and a lower resistance than that on the Au or the Au-COOH. Both the MECs with the Au-COOH and Au-NH₂ anodes exhibited a higher current density than that with a bare Au anode. The biofilm formed on the Au-COOH was denser than that on bare Au, while the biofilm on the Au-NH₂ had a greater thickness, suggesting a critical role of direct EET in this system. This work suggests that functional groups such as–COOH and-NH₂ could promote electrode performance by accelerating the direct EET of EAB on electrode surface.     

Catalytic activity of noble metal nanoparticles toward hydrodechlorination: influence of catalyst electronic structure and nature of adsorption

In this study, stabilized Pd, Pt and Au nanoparticles were successfully prepared in aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping agent. These metal nanoparticles were then tested for catalytic hydrodechlorination toward two classes of organochlorinated compounds (vinyl polychlorides including trichloroethylene (TCE), tetrachloroethylene (PCE), and alkyl polychlorides including 1,1,1-trichloroethane (1,1,1-TCA), and 1,1,1,2-tetrachloroethane (1,1,1,2-TeCA)) to determine the rate-limiting steps and to explore the reaction mechanisms. The surface area normalized reaction rate constant, k_SA, showed a systematic dependence on the electronic structure (the density of states at the Fermi level) of the metals, suggesting that adsorption of organochlorinated reactants on the metal catalyst surfaces is the rate-limiting step for catalytic hydrodechlorination. Hydrodechlorination rates of 1,1,1-TCA and 1,1,1,2-TeCA agreed with the bond strength of the first (weakest) dissociated C-Cl bond, suggesting that C-Cl bond cleavage, which is the first step for dissociative adsorption of the alkyl polychlorides, controlled the catalytic hydrodechlorination rate. However, hydrodechlorination rates of TCE and PCE correlated with the adsorption energies of their molecular (non-dissociative) adsorption on the noble metals rather than with the first C-Cl bond strength, suggesting that molecular adsorption governs the reaction rate for hydrodechlorination of the vinyl polychlorides.     

污水处理厂出水中常见抗生素光降解去除规律研究进展

残留的抗生素和新产生的抗生素代谢产物会通过不同的途径进入到环境中,污染环境,诱导产生一些耐药和变异的超级细菌,严重危害人类健康.梳理分析了污水处理厂出水中常见的抗生素种类,阐述了光降解抗生素的反应机理和影响抗生素光降解的因素,并从高效光转化材料的制备、光降解产物的精准识别和降解产物的生物毒性评估角度提出开展后续研究的建...     

MIEX树脂特性及其在饮用水处理中的应用

阐述了MIEX阴离子交换树脂的特性及其在饮用水处理中对消毒副产物前质、色度、浊度、藻类等的去除效果.对近年来MIEX树脂与超滤、活性炭、臭氧等工艺组合的应用情况进行了介绍,初步分析了MIEX树脂用于净水处理的经济性.