Assessing dam implementation impact on threatened carnivores: the case of Alqueva in SE Portugal

Large dam construction in water deficient areas is a management decision often controversial. Besides providing water storage, economical benefits, and a source of renewable energy, the construction and flooding caused by large dams cause disruptions in natural systems. We monitored the pre- and post-Alqueva dam impacts on the threatened carnivore species (polecat, otter, wildcat and Iberian lynx) populations in SE Portugal, and assessed which factors mostly contribute to post-dam distribution. Major short term impacts of large dams are: (1) increase in accessibility and human presence; (2) movement of heavy machinery and dam-workers; (3) deforestation with habitat loss and fragmentation; (4) change from lotic to lentic system; (5) lower prey availability and harsher capture; and (6) changes in land use adjacent to the reservoir. Thus, the response to those impacts can be predicted as a decline of polecat, wildcat and lynx distribution ranges, and a recovery of the otter from the severe short term impacts. Our results corroborate this hypothesis for all the species, especially during deforestation/early flooding. Otter's distribution range increased in the phase of greater impact, with a subsequent decrease with flooding. Our results suggest carnivores used "escape" areas with favourable habitat and prey conditions, however, the areas with higher probability of species presence decreased by two fold showing a drastic range reduction. To ensure populations' survival of these charismatic threatened carnivore populations of Mediterranean landscapes of south-east Portugal, we propose continuing the monitoring program and the development of a conservation program for the subsisting areas of optimal and suboptimal habitats.     

Characterization and validation of a Portuguese natural reference soil to be used as substrate for ecotoxicological purposes

This study describes the first attempt to validate a Portuguese natural soil (PTRS1) to be used as reference soil for ecotoxicological purposes, aimed to both: (i) obtain ecotoxicological data for the derivation of Soil Screening Values (SSVs) with regional relevance, acting as a substrate to be spiked with ranges of concentrations of the chemicals under evaluation and (ii) act as control and as substrate for the dilution of contaminated soils in ecotoxicological assays performed to evaluate the ecotoxicity of contaminated soils, in tier 2 of risk assessment frameworks, applied to contaminated lands. The PTRS1 is a cambisol from a granitic area integrated in the Central Iberian Zone. After chemical characterization of the soil in terms of pseudo-total metals, PAHs, PCBs and pesticide contents, it was possible to perceive that some metals (Ba, Be, Co, Cr and V) surpass the Dutch Target Values (Dtvs) corrected for the percentage of organic matter and clay of the PTRS1. Nevertheless, these metals displayed total concentrations below the background total concentrations described for Portuguese soils in general. The same was observed for aldrin, endosulfan I, endosulfan II, heptachlor epoxide, and heptachlor; however the Dtvs corrected become negligible. The performance of invertebrate and plant species, commonly used in standard ecotoxicological assays, was not compromised by both soil properties and soil metal contents. The results obtained suggest that the PTRS1 can be used as a natural reference soil in ecotoxicological assays carried out under the scope of ecological risk assessment.     

Phosphorus geochemistry in a Brazilian semiarid mangrove soil affected by shrimp farm effluents

Wastewater discharge from shrimp farming is one of the main causes of eutrophication in mangrove ecosystems. We investigated the phosphorus (P) geochemistry in mangrove soils affected by shrimp farming effluents by carrying out a seasonal study of two mangrove forests (a control site (CS); a site affected by shrimp farm effluents (SF)). We determined the soil pH, redox potential (Eh), total organic carbon (TOC), total phosphorus (TP), and dissolved P. We also carried out sequential extraction of the P-solid phases. In SF, the effluents affected the soil physicochemical conditions, resulting in lower Eh and higher pH, as well as lower TOC and higher TP than in CS. Organic P forms were dominant in both sites and seasons, although to a lesser extent in SF. The lower TOC in SF was related to the increased microbial activity and organic matter decomposition caused by fertilization. The higher amounts of P oxides in SF suggest that the effluents alter the dominance of iron and sulfate reduction in mangrove soils, generating more reactive Fe that is available for bonding to phosphates. Strong TP losses were recorded in both sites during the dry season, in association with increased amounts of exchangeable and dissolved P. The higher bioavailability of P during the dry season may be attributed to increased mineralization of organic matter and dissolution of Ca-P in response to more oxidizing and acidic conditions. The P loss has significant environmental implications regarding eutrophication and marine productivity.     

Air quality assessment of Estarreja, an urban industrialized area, in a coastal region of Portugal

Despite the increasing concern given to air quality in urban and industrial areas in recent years, particular emphasis on regulation, control, and reduction of air pollutant emissions is still necessary to fully characterize the chain emissions–air quality–exposure–dose–health effects, for specific sources. The Estarreja region was selected as a case study because it has one of the largest chemical industrial complexes in Portugal that has been recently expanded, together with a growing urban area with an interesting location in the Portuguese coastland and crossed by important road traffic and rail national networks. This work presents the first air quality assessment for the region concerning pollutant emissions and meteorological and air quality monitoring data analysis, over the period 2000–2009. This assessment also includes a detailed investigation and characterization of past air pollution episodes for the most problematic pollutants: ozone and PM10. The contribution of different emission sources and meteorological conditions to these episodes is investigated. The stagnant meteorological conditions associated with local emissions, namely industrial activity and road traffic, are the major contributors to the air quality degradation over the study region. A set of measures to improve air quality—regarding ozone and PM10 levels—is proposed as an air quality management strategy for the study region.     

The seasonal and spatial patterns of ingestion of polyfilament nylon fragments by estuarine drums (Sciaenidae)

Introduction  

Artisanal fisheries in tropical estuaries are an important economic activity worldwide. However, gear (e.g. ropes, nets, buoys, crates) and vessels are often in use under dangerous conditions. Polyfilament nylon ropes are used until they are well beyond human and environmental safety limits. Severe wear and tear results in the contamination of the environment with micro-fragments. The spread of these fragments in the marine environment and their ingestion by the biota are documented in the scientific literature and are increasing concerns. The aim of this study was to evaluate the ingestion of plastic fragments by two fish (drum) species in relation to seasonal, habitat and fish size–class variation.     

Effects of Weathering on Mechanical,Antimicrobial Properties and Biodegradation Process of Silver Loaded TPE Compounds

The incorporation of antimicrobial metals such as silver is an alternative to protect the material against microbial attack. However, loaded polymer can lose its antimicrobial properties after some time of use, and the additive may even leak out into the environment becoming harmful to non-target organisms. This study aims to evaluate the mechanical properties and antimicrobial activity of silver containing thermoplastic elastomer (TPE) samples exposed to weathering and the influence of additive incorporation in material biodegradation in the soil. For this purpose, silver ions (Ag⁺_bentonite, Ag⁺_phosphate) and silver nanoparticles (AgNp_silica) based additives were blended in a formulation of SEBS, polypropylene and mineral oil. The test samples were exposed to natural ageing over nine months, and were then evaluated according to their mechanical properties, antimicrobial activity, and degree of crystallinity and surface characteristics. The biodegradation process before and after natural ageing was evaluated through the generation of carbon dioxide. The results show that the action of natural ageing reduced the mechanical properties of loaded and unloaded TPE, and modified the degree of crystallinity and the chemical characteristic of the TPE surface. The presence or type of additive did not influence material resistance after being exposed to weathering. A decrease in antimicrobial activity in samples after natural ageing was observed. At a variable level and according to the chemical content, generation of carbon dioxide from TPE samples was greater in aged samples than in unexposed ones.     

Evaluation of an approach for the characterization of reactive and available pools of 20 potentially toxic elements in soils: part II--solid-solution partition relationships and ion activity in soil solutions

To assess environmental risks related to contaminants in soil it is essential to predict the available pool of inorganic contaminants at regional scales, accounting for differences between soils from variable geologic and climatic origins. An approach composed of a well-accepted soil extraction procedure (0.01 M CaCl(2)) and empirical Freundlich-type models in combination with mechanistically based models which to date have been used only in temperate regions was applied to 136 soils from a South European area and evaluated for its possible general use in risk assessment. Empirical models based on reactive element pools and soil properties (pH, organic carbon, clay, total Al, Fe and Mn) provided good estimations of available concentrations for a broad range of contaminants including As, Ba, Cd, Co, Cu, Hg, Mo, Ni, Pb, Sb, Se and Zn (r(2): 0.46-0.89). The variation of the pools of total Al in soils expressed the sorptive capacity of aluminosilicates and Al oxides at the surfaces and edges of clay minerals better than the actual variability of clay contents. The approach has led to recommendations for further research with particular emphasis on the impact of clay on the solubility of As and Sb, on the mechanisms controlling Cr and U availability and on differences in binding properties of soil organic matter from different climatic regions. This study showed that such approach may be included with a good degree of certainty for first step risk assessment procedures to identify potential risk areas for leaching and uptake of inorganic contaminants in different environmental settings.     

Modelling the photochemical pollution over the metropolitan area of Porto Alegre,Brazil

The main purpose of this study is to evaluate the photochemical pollution over the Metropolitan Area of Porto Alegre (MAPA), Brazil, where high concentrations of ozone have been registered during the past years. Due to the restricted spatial coverage of the monitoring air quality network, a numerical modelling technique was selected and applied to this assessment exercise. Two different chemistry-transport models – CAMx and CALGRID – were applied for a summer period, driven by the MM5 meteorological model. The meteorological model performance was evaluated comparing its results to available monitoring data measured at the Porto Alegre airport. Validation results point out a good model performance. It was not possible to evaluate the chemistry models performance due to the lack of adequate monitoring data. Nevertheless, the model intercomparison between CAMx and CALGRID shows a similar behaviour in what concerns the simulation of nitrogen dioxide, but some discrepancies concerning ozone. Regarding the fulfilment of the Brazilian air quality targets, the simulated ozone concentrations surpass the legislated value in specific periods, mainly outside the urban area of Porto Alegre. The ozone formation is influenced by the emission of pollutants that act as precursors (like the nitrogen oxides emitted at Porto Alegre urban area and coming from a large refinery complex) and by the meteorological conditions.     

Application of fluidization to separate packaging waste plastics

The objective of the experimental work described in this paper is the study of the separation of PS (polystyrene) from PET (polyethylene terephthalate) and PVC (polyvinyl chloride) from drop-off points using a fluidized bed separator. This is a low-cost process commonly used in the hydro-classification of mineral ores. Firstly, experimental tests were carried out with artificial granulated samples with different grain sizes, types and sources of plastic ("separability tests"). The particle settling velocities were determined under different operating conditions. Then, based on the results, the laboratory tests continued with real mixtures of waste plastics ("separation tests") and the efficiency of the process was evaluated. From a PET-rich mixture, a concentrate of PS with a 75% grade in PS was produced while the underflow was quite clear from PS (grade less than 0.5% in PS).