A method for measuring dermal exposure to multifunctional acrylates

UV-curable acrylates are used increasingly for coating wood surfaces in the furniture industry. One of the active components, tripropylene glycol diacrylate (TPGDA), is known to be both an allergen and irritant to the skin. Methods to measure dermal exposure to skin irritants and allergens, such as acrylates, are insufficient for exposure assessment and there is none for this compound. The aim of this investigation was to develop a skin and surface sampling method, based on tape stripping, and a gas chromatographic method for quantitative analysis for assessing occupational skin exposure to multifunctional acrylates. Twelve adhesives were tested for their efficiency to remove TPGDA and UV-coating from a glass surface, the skin of guinea pigs and human volunteers employing the tape-stripping method in order to find the best performing tape. Variables that affect removal efficiency such as the applied dose and its retention time on the skin, tape adhesion time on the skin, and the number of strippings required to detect the contaminant from the skin were studied. Fixomull tape performed the best during sampling and analysis and had the most consistent removal efficiencies for the studied substances. The average removal efficiency with a single stripping at the 2 microliters TPGDA exposed skin sites was 85% (RSD = 14.1), and for UV-resin exposed sites 63% (RSD = 20.2). The results indicated that this method can be used for measuring dermal exposure to multifunctional acrylates efficiently, accurately, and economically. This method provides a sensitive and powerful tool for the assessment of dermal exposure to multifunctional acrylates both from the skin and from other contaminated surfaces in occupational field settings.     

MEAD: an interdisciplinary study of the marine effects of atmospheric deposition in the Kattegat

This paper summarises the results of the EU funded MEAD project, an interdisciplinary study of the effects of atmospheric nitrogen deposition on the Kattegat Sea between Denmark and Sweden. The study considers emissions of reactive nitrogen gases, their transport, transformations, deposition and effects on algal growth together with management options to reduce these effects. We conclude that atmospheric deposition is an important source of fixed nitrogen to the region particularly in summer, when nitrogen is the limiting nutrient for phytoplankton growth, and contributes to the overall eutrophication pressures in this region. However, we also conclude that it is unlikely that atmospheric deposition can, on its own, induce algal blooms in this region. A reduction of atmospheric nitrogen loads to this region will require strategies to reduce emissions of ammonia from local agriculture and Europe wide reductions in nitrous oxide emissions.     

Comparison of triticonazole dissipation after seed or soil treatment

This study examined the long-term fate of the fungicide triticonazole (TTZ; 5-[(4-chlorophenyl)methylene]-2,2-dimethyl-1-(1H-1,2,4-triazol-1-ylmethyl)cydopentanol) applied at a normal field dose (8.9 g ha(-1)) via seed treatment, which is the normal alternative in practice. The TTZ was applied to wheat (Triticum aestivum L.) grains as a disinfectant before sowing or spraying on bare soil for comparison and reference to the seed treatment. The seeds were germinated and grown in pots in a greenhouse at 22 +/- 3 degrees C. The dissipation of TTZ was studied by gas chromatography-mass spectrometry (GC-MS) analysis of the residues every fourth week until no TTZ could be detected. The recovery for analysis of TTZ in soil was between 98 and 131%, and the quantification level was 0.002 mg kg(-1). After 56 d of incubation, 20 and 28% of the TTZ applied remained in the soil and seed treatments, respectively, with corresponding half-lives of 27 and 29 d. The microbial biomass initially decreased in the soil treatment but had recovered after 56 d. The active part of the biomass was not changed during the experimental time. Thus, with respect to dissipation of TTZ and its effect on the soil microbial biomass and activity, no long-lasting difference between soil and seed treatments could be found.     

Wind energy and natural ventilation potential of a wind catcher in Yazd – Iran (a long-term measurement)

When designing energy efficient buildings it is useful to study existing climate—responsive building typologies. The wind towers or wind-catchers of Yazd city in Iran are typical examples of such a typology. Although many previous studies have investigated the performance of various types of wind catcher systems, studies based on a long-term real-life measurement can be rarely found. In this study a long-term whole year monitoring campaign on an existing full scale four sided wind catcher in Yazd was carried out in 2014–2015. Three prevailing wind directions were identified and the measured on-site wind speeds were used to estimate the wind induced natural ventilation potential of the tower. A shaft/tower airflow performance index was developed. The monitoring results were compared to the ASHRAE Standard 62:2001 ventilation rate requirement. Results show that the total ventilation rate of the wind tower surpasses the ASHRAE Standard requirements. Furthermore it shows that the shafts are exposed to the prevailing wind directions perform better. For more effective natural ventilation a wind tower with adaptable openings/shafts are proposed.     

Rising trends of dissolved organic matter in drinking-water reservoirs as a result of recovery from acidification in the Ore Mts., Czech Republic

The concentration of chemical oxygen demand (COD), a common proxy for dissolved organic matter (DOM), was measured at seven drinking-water reservoirs and four streams between 1969 and 2006. Nine of them showed significant DOM increases (median COD change +0.08 mg L⁻¹ yr⁻¹). Several potential drivers of these trends were considered, including air temperature, rainfall, land-use and water sulfate concentration. Temperature and precipitation influenced inter-annual variations, but not long-term trends. The long-term DOM increase was significantly associated with declines of acidic deposition, especially sulfur deposition. Surface water sulfate concentrations decreased from a median of 62 mg L⁻¹-27 mg L⁻¹ since 1980. The magnitude of DOM increase was positively correlated with average DOM concentration (R² = 0.79, p < 0.001). Simultaneously, DOM concentration was positively correlated with the proportion of Histosols within the catchments (R² = 0.79, p < 0.001). A focus on the direct removal of DOM by water treatment procedures rather than catchment remediation is needed.     

Effect of submergence-emergence sequence and organic matter or aluminosilicate amendment on metal uptake by woody wetland plant species from contaminated sediments

Site-specific hydrological conditions affect the availability of trace metals for vegetation. In a greenhouse experiment, the effect of submersion on the metal uptake by the wetland plant species Salix cinerea and Populus nigra grown on a contaminated dredged sediment-derived soil and on an uncontaminated soil was evaluated. An upland hydrological regime for the polluted sediment caused elevated Cd concentrations in leaves and cuttings for both species. Emergence and soil oxidation after initial submersion of a polluted sediment resulted in comparable foliar Cd and Zn concentrations for S. cinerea as for the constant upland treatment. The foliar Cd and Zn concentrations were clearly higher than for submerged soils after initial upland conditions. These results point at the importance of submergence-emergence sequence for plant metal availability. The addition of foliar-based organic matter or aluminosilicates to the polluted sediment-derived soil in upland conditions did not decrease Cd and Zn uptake by S. cinerea.     

Assessors and use of assessment centre dimensions: a fresh look at a troubling issue*

Previous studies on the construct validity of assessment centres have generally produced puzzling results. The premise of this study is that these prior studies were relatively one‐sided. Actually, most previous studies were field studies, which typically used the multitrait–multimethod approach to distinguish between two sources of variance (i.e., exercises and dimensions). Therefore, this study aims to shed light on the issue of assessment centre construct validity by addressing substantive and methodological concerns inherent in previous research. In this study, 85 industrial and organizational psychology students and 39 managers rated videotaped assessment centre candidates in three exercises on six dimensions. Results from generalizability analyses showed that assessors' ratings were relatively veridical. In addition, when assessors rated candidates whose performances varied across dimensions and whose performances were relatively consistent across exercises, they were reasonably able to differentiate among the various dimensions. They also rated such candidate profiles similarly on the various dimensions across exercises. When assessors rated a candidate profile without clear performance fluctuations across dimensions, distinctions about dimensions were more blurred. Results from student and managerial assessors were similar, although managers distinguished somewhat less between the various dimensions. The research and practical implications of these findings are discussed. Copyright © 2001 John Wiley & Sons, Ltd.     

Thermal radiation in oxy-fuel flames

This work investigates thermal radiation in oxy-fuel flames, based on experiments and modelling. Experiments were conducted in a 100 kW test facility in air and oxy-fuel combustion atmospheres, using two different types of fuels, lignite and propane. In-flame measurements of gas composition, temperature and total radiation intensity, were performed and used as input to radiation modelling to examine the influence of oxy-fuel conditions on gas and particle radiation characteristics. In the modelling, the spectral properties of CO₂ and H₂O are treated by means of a statistical narrow band model and particle radiation is modelled for both scattering and non-scattering particles.Experiments on the propane flame show that the flame radiation conditions are drastically influenced by the recycling conditions. With OF 27 conditions (27% oxygen in the feed gas) and dry recycling, the temperature is slightly lower compared to air-fired conditions, but the emitted intensity is significantly increased. Modelling shows that this is mainly caused by a significantly increased soot radiation. Propane flame images show that the presence of soot in oxy-fuel conditions varies strongly with recycling conditions. The contribution due to an increased emission by CO₂ is of minor importance. In the lignite experiments similar flame temperatures were kept during air and oxy-fuel combustion (OF 25 conditions with dry recycling). The measurements show that the intensity levels in both flames are similar which is due to a strong particle radiation in both environments. The modelling reveals that the dominance by particle radiation contra gas radiation is closely related to whether the particles are scattering or non-scattering.